Browse > Article
http://dx.doi.org/10.12989/gae.2018.14.2.141

Analysis on the creep response of bolted rock using bolted burgers model  

Zhao, Tong-Bin (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology)
Zhang, Yu-Bao (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology)
Zhang, Qian-Qing (Geotechnical and Structural Engineering Research Center, Shandong University)
Tan, Yun-Liang (State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology)
Publication Information
Geomechanics and Engineering / v.14, no.2, 2018 , pp. 141-149 More about this Journal
Abstract
In this paper, the creep behavior of bolted rock was analyzed by using the unconfined creep tests and the numerical results. Based on the test results, the Bolted Burgers creep model (B-B model) was proposed to clarify the creep mechanism of rock mass due to rock bolts. As to the simulation of the creep behaviour of bolted rock, a new user-defined incremental iterative format of the B-B model was established and the open-source $FLAC^{3D}$ code was written by using the object-oriented language (C++). To check the reliability of the present B-B creep constitutive model program, a numerical model of a tunnel with buried depth of 1000 m was established to analyze the creep response of the tunnel with the B-B model support, the non-support and the bolt element support. The simulation results show that the present B-B model is consistent with the calculated results of the inherent bolt element in $FLAC^{3D}$, and the convergence deformation can be more effectively controlled when the proposed B-B model is used in the $FLAC^{3D}$ software. The big advantage of the present B-B creep model secondarily developed in the $FLAC^{3D}$ software is the high computational efficiency.
Keywords
bolted rock; creep test; Bolted Burgers model; $FLAC^{3D}$ secondary development;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Showkati, A., Maarefvand, P. and Hassani, H. (2015), "Theoretical determination of stress around a tensioned grouted anchor in rock", Geomech. Eng., 8(3), 441-460.   DOI
2 Spang, K. and Egger, P. (1990), "Action of fully-grouted bolts in jointed rock and factors of influence", Rock Mech. Rock Eng., 23(3), 201-229.   DOI
3 Sun, J. (2007), "Rock rheological mechanics and its advance in engineering applications", Chin. J. Rock Mech. Eng., 26(6), 1081-1106 (in Chinese).
4 Tan, Y.L., Liu, X.S., Ning, J.G., Lu, Y.W. (2017), "In situ investigations on failure evolution of overlying strata induced by mining multiple coal seams", Geotech. Test. J., 40(2), 1-14.
5 Tan, Y.L., Yu, F.H., Ning, J.G. and Zhao, T.B. (2015), "Design and construction of entry retaining wall along a gob side under hard roof stratum", J. Rock Mech. Min. Sci., 77, 115-121.
6 Wang, J.B., Liu, X.R., Liu, X.J. and Huang, M. (2014), "Creep properties and damage model for salt rock under low-frequency cyclic loading", Geomech. Eng., 7(5), 569-587.   DOI
7 Wang, J.B., Liu, X.R., Song, Z.P. and Shao, Z.S. (2015), "An improved Maxwell creep model for salt rock", Geomech. Eng., 9(4), 499-511.   DOI
8 Wen, N.D. (2007), "The study of anchorage styles optimization of fractured rock mass on experimental and numerical simulation", M.Sc. Dissertation, Shandong University, Jinan, China.
9 Yang, M.J., Zhao, Y.M. and Zhang, N. (2014), "Creep behavior of epoxy-bonded anchor system", J. Rock Mech. Min. Sci., 67, 96-103.
10 Wu, W., Jiang, G., Huang, S. and Leo, C.J. (2014), "Vertical dynamic response of pile embedded in layered transversely isotropic soil", Math. Prob. Eng.
11 Zhang, K., Zhang, G.M., Hou, R.B., Wu, Y. and Zhou, H.Q. (2015), "Stress evolution in roadway rock bolts during mining in a fully mechanized longwall face, and an evaluation of rock bolt support design", Rock Mech. Rock Eng., 48(1), 333-344.   DOI
12 Zhao, T.B., Guo, W.Y., Lu, C.P. and Zhao, G.M. (2016), "Failure characteristics of combined coal-rock with different interfacial angles", Geomech. Eng., 11(3), 345-359.   DOI
13 Zhao, T.B., Guo, W.Y., Tan, Y.L., Lu, C.P. and Wang, C.W. (2017), "Case histories of rock bursts under complicated geological conditions", Bull. Eng. Geol. Environ., 1-17.
14 Boon, C.W., Houlsby, G.T. and Utili, S. (2015), "Designing tunnel support in jointed rock masses via the DEM", Rock Mech. Rock Eng., 48(2), 603-632.   DOI
15 Cai, Y., Esaki, T. and Jiang, Y.J. (2004), "A rock bolt and rock mass interaction model", J. Rock Mech. Min. Sci., 41(7), 1055-1067.
16 Cai, Y., Jiang, Y.J., Djamaluddin, I., Iura, T. and Esaki, T. (2015), "An analytical model considering interaction behavior of grouted rock bolts for convergence-confinement method in tunneling design", J. Rock Mech. Min. Sci., 76, 112-126.
17 Kang, H.P., Lin, J. and Fan, M.J. (2015), "Investigation on support pattern of a coal mine roadway within soft rocks-a case study", J. Coal Geol., 140, 31-40.   DOI
18 Chen, H. (2008), "Model test theoretical analysis of the interaction of the surrounding rock and supporting system of underground engineering", Ph.D. Dissertation, Institute of Rock & Soil Mechanics, Chinese Academy of Sciences, Wuhan, China.
19 Chen, S.H., Qiang, S., Chen, S.F. and Egger, P. (2004), "Composite element model of the fully grouted rock bolt", Rock Mech. Rock Eng., 37(3), 193-212.   DOI
20 Deb, D. and Das, K.C. (2014), "A new doubly enriched finite element for modelling grouted bolt crossed by rock joint", J. Rock Mech. Min. Sci., 70, 47-58.
21 Li, Y.J., Zhang, D.L. and Fang, Q. (2014), "A physical and numerical investigation of the failure mechanism of weak rocks surrounding tunnels", Comput. Geotech., 61, 292-307.   DOI
22 Lopez-Gayarre, F., Fernandez-Rodriguez, R., Gonzalez-Nicieza, C. and Garcia-Menendez, J.R. (2015), "Analysis of viscoelastic behaviour of rock salt using hydraulic cylinder test", Bull. Eng. Geol. Environ., 74(2), 545-553.   DOI
23 Nemcik, J., Ma, S.Q., Aziz, N., Ren, T. and Geng, X.Y. (2014), "Numerical modelling of failure propagation in fully grouted rock bolts subjected to tensile load", J. Rock Mech. Min. Sci., 71, 293-300.
24 Cao, P., Youdao, W., Yixian, W., Haiping, Y. and Bingxiang, Y. (2016), "Study on nonlinear damage creep constitutive model for high-stress soft rock", Environ. Earth Sci., 75(10), 900.   DOI
25 Selvadurai, A.P.S. (1979), "Some results concerning the viscoelastic relaxation of prestress in a surface rock anchor", J. Rock Mech. Min. Sci., 16(5), 309-317.   DOI
26 Selvadurai, A.P.S. (1978), "The time-dependent response of a deep rigid anchor in a viscoelastic medium", J. Rock Mech. Min. Sci., 15(1), 11-19.   DOI