1 |
Demir, A., Yildiz, A., Laman, M. and Ornek, M. (2014), "Experimental and numerical analyses of circular footing on geogrid-reinforced granular fill underlain by soft clay", Acta Geotech., 9(4), 711-723.
DOI
|
2 |
Edincliler, A. and Cagatay, A. (2013), "Weak subgrade improvement with rubber fibre inclusions", Geosynth., 20(1), 39-46.
DOI
|
3 |
Edincliler, A., Baykal, G. and Dengili, K. (2004), "Determination of static and dynamic behavior of recycled materials for highways", Resource. Construct. Recycl., 42 (3), 223-237.
DOI
|
4 |
Feng, Z.Y. and Sutter, K.G. (2000) "Dynamic properties of granulated rubber sand mixtures", Geotech. Test. J., 23(3), 338-344.
DOI
|
5 |
FLAC-3D (2002), Fast Lagrangian Analysis of Continua in Three Dimensions, ITASCA Consulting Group, Inc., Minneapolis, Minnesota, U.S.A.
|
6 |
Garcia-Rojo, R. and Herrmann, H.J. (2005), "Shakedown of unbound granular material", Granul. Matter, 7(2), 109-118.
DOI
|
7 |
Gotteland, P., Lambert, S. and Balachowski, L. (2005), "Strength characteristics of tyre chips-sand mixtures", Studia Geotech. Mech., 27(1-2), 55-66.
|
8 |
Hataf, N. and Rahimi, M.M. (2005), "Experimental investigation of bearing capacity of sand reinforced with randomly distributed tire shreds", Construct. Build. Mater., 20(10), 910-916.
DOI
|
9 |
Karabash, Z. and Cabalar, A.F. (2015), "Effect of tire crumb and cement addition on triaxial shear behavior of sandy soils", Geomech. Eng., 8(1), 1-15.
DOI
|
10 |
Keskin, M.S. and Laman, M. (2014), "Experimental study of bearing capacity of strip footing on sand slope reinforced with tire chips", Geomech. Eng., 6(3), 249-262.
DOI
|
11 |
Masing, G. (1926), "Eigenspannungen und verfestigung beim messing", Proceedings of the 2nd International Congress of Applied Mechanics, Zurich, Switzerland.
|
12 |
Lavasan, A.A. and Ghazavi, M. (2008), "Influence of interference on failure mechanism of closely Ccnstructed circular footings on reinforced sand", Proceedings of 4th Asian Regional Conference on Geosynthetcs, Shanghai, China, June.
|
13 |
Lee, C.J. and Sheu, S.F. (2007), "The stiffness degradation and damping ratio evolution of Taipei silty clay under cyclic straining", Soil Dyn. Earthq. Eng. J., 27(8), 730-740.
DOI
|
14 |
Liam Finn, W.D., Lee, K.W. and Martin, G.R. (1977), "An effective stress model for liquefaction", Elect. Lett., 103(6), 517-533.
|
15 |
MathWorks Inc. (1999), MATLAB the Language of Technical Computing, Natick, Massachusetts, U.S.A.
|
16 |
Moghaddas Tafreshi, S.N. and Norouzi, A.H. (2012), "Bearing capacity of a square model footing on sand reinforced with shredded tire-An experimental investigation", Construct. Build. Mater., 35, 547-556.
DOI
|
17 |
Moghaddas Tafreshi, S.N. and Norouzi, A.H. (2015), "Application of waste rubber to reduce the settlement of road embankment", Geomech. Eng., 9(2), 219-241.
DOI
|
18 |
Moghaddas Tafreshi, S.N., Khalaj, O. and Dawson, A.R. (2013), "Pilot-scale load tests of a combined multi-layered geocell and rubber-reinforced foundation", Geosynth., 20(3), 143-161.
DOI
|
19 |
Moghaddas Tafreshi, S.N., Tavakoli Mehrjardi, G.T. and Dawson, A.R. (2012), "Buried pipes in rubber-soil backfilled trenches under cyclic loading", J. Geotech. Geoenviron. Eng., 138(11), 1346-1356.
DOI
|
20 |
Moghaddas Tafreshi, S.N., Khalaj, O. and Dawson, A.R. (2014), "Repeated loading of soil containing granulated rubber and multiple geocell layers", Geotext. Geomembr., 42(1), 25-38.
DOI
|
21 |
Perez, I., Medina, L. And Romana, M.G. (2006), "Permanent deformation models for a granular material used in road pavements", Construct. Build. Mater., 20(9), 790-800.
DOI
|
22 |
Munnoli, P.M., Sheikh, S., Mir, T., Kesavan, V. and Jha, R. (2013), "Utilization of rubber tyre waste in subgrade soil", Proceedings of the IEEE Global Humanitarian Technology Conference, South Asia Satellite (GHTC-SAS), Trivandrum, India, August.
|
23 |
Nakhaei, A., Marandi, S.M., Sani Kermani, S. and Bagheripour, M.H. (2012), "Dynamic properties of granular soils mixed with granulated rubber", Soil Dyn. Earthq. Eng. J., 43(6), 124-132.
DOI
|
24 |
Newmark N.M. and Rosenblueth E. (1971), Fundamentals of Earthquake Engineering, Prentice-Hall, Inc., Englewood Cliffs, New Jersey, U.S.A.
|
25 |
Prakash, S. (1981), Soil Dynamics, McGraw-Hill, New York, U.S.A.
|
26 |
Prasad, D.S.V. and Prasada Raju, G.V.R. (2009), "Performance of waste tyre rubber on model flexible pavement", J. Eng. Appl. Sci., 4(6), 89-92.
|
27 |
Recycling Research Institute, (RRI) (2009), .
|
28 |
Reddy, B.S., Pradeep Kumar, D. and Murali Krishna, A. (2016), "Evaluation of the optimum mixing ratio of a sand-tire chips mixture for geoengineering applications", J. Mater. Civ. Eng., 28(2), 06015007.
DOI
|
29 |
Reddy, B.S. and Murali Krishna, A. (2015), "Recycled tire chips mixed with sand as lightweight backfill material in retaining wall applications: An experimental investigation, J. Geosynth. Ground Eng., 1(4), 31.
DOI
|
30 |
Reddy, B.S. and Murali Krishna, A. (2016), "Mitigation of dynamic loading effects on retaining walls using recycled tire chips", Proceedings of the Indian Geotechnical Conference (IGC2016), Chennai, India, December.
|
31 |
Richard, R.M, and Abott, B.J. (1975), "Versatile elastic-plastic stress-strain formula", J. Eng. Mech. Div., 101(4), 511-515.
|
32 |
Rubber Manufacturers Association (RMA) (2007), .
|
33 |
Singh, M., Mathur, A.M., Goswami, A., Pareek, C.P. and Sachdeva, D. (2016), "Effect on shear strength parameters of granular soil of Rajasthan by mixing waste rubber fiber", SSRG J. Civ. Eng., 3(5), 2348-8352.
|
34 |
Sitharam, T.G. and Sireesh, S. (2005), "Behavior of embedded footings supported on geogrid cell reinforced foundation beds", Geotech. Test. J., 28(5), 452-463.
|
35 |
Thakur, J.K., Han, J., Pokharel, S.K. and Parsons, R.L. (2012), "Performance of geocell-reinforced recycled asphalt pavement (RAP) bases over weak subgrade under cyclic plate loading", Geotext. Geomembr., 35, 14-24.
DOI
|
36 |
Waste and Resources Action Programme (WRAP) (2005), Tyres Re-use and Recycling, .
|
37 |
Yang, Z. (1974), "Strength and deformation characteristics of reinforced sand", Ph.D. Dissertation, University of California, Los Angeles, U.S.A.
|
38 |
Zheng-Yi, F. and Sutter, K.G. (2009), "Dynamic properties of granulated rubber/sand mixtures", Geotechnical Testing J., 23(3), 338-344.
DOI
|
39 |
Yoon, S., Prezzi M., Siddiki, N.Z. and Kim, B. (2006), "Construction of a test embankment using a sand-tire shred mixture as fill material", Waste Manage., 26(9), 1033-1044.
DOI
|
40 |
Yoon, Y.W., Heo, S.B. and Kim, S.K. (2008), "Geotechnical performance of waste tires for soil reinforcement from chamber tests", Geotext. Geomembr., 26(1), 100-107.
DOI
|
41 |
Zornberg, J.G., Cabral, A.R. and Viratjandr, C. (2004), "Behaviour of tire shred-sand mixtures", Can. Geotech. J., 41(2), 227-241.
DOI
|
42 |
ASTM D1557 (2012), Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
|
43 |
Ahmadi, H. and Hajialilue-Bonab, M. (2012), "Experimental and analytical investigations on bearing capacity of strip footing in reinforced sand backfills and flexible retaining wall", Acta Geotech., 7(4), 357-373.
DOI
|
44 |
ASTM D1195 (2009), Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
|
45 |
ASTM D1196/D1196M (2004), Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements. ASTM International, West Conshohocken, Pennsylvania, U.S.A.
|
46 |
Boussinesq, J. (1885), Application des Potentiels a L'Etude de L'Equilibre et du Mouvement des Solides Elastiques, Gauthier-Villars (in French).
|
47 |
ASTM D2487 (2011), Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM International, West Conshohocken, Pennsylvania, U.S.A.
|
48 |
ASTM D422 (2007), Standard Test Method for Particle-Size Analysis of Soils, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
|
49 |
Attom, M.F. (2006), "The use of shredded waste tires to improve the geotechnical engineering properties of sands", Environ. Geol., 49(4), 497-503.
DOI
|
50 |
Bosscher, P.J., Edil, T.B. and Kuraoka, S. (1997), "Design of highway embankments using tire chips", J. Geotech. Geoenviron. Eng., 123(4), 295-304.
DOI
|
51 |
Brara, A., Brara, A., Daouadji, A., Bali, A. and Mostafa Daya, E. (2016), "Dynamic properties of dense sand-rubber mixtures with small particles size ratio", Eur. J. Environ. Civ. Eng., 21(9), 1065-1079.
|
52 |
Cabalar, A.F. and Karabash, Z. (2015), "California bearing ratio of a sub-base material modified with tire buffings and cement addition", J. Test. Eval., 43(6), 1279-1287.
|
53 |
Cetin, H., Fener, M. and Gunaydin, O. (2006), "Geotechnical properties of tire-cohesive clayey soil mixtures as a fill material", Eng. Geol., 88(1) 110-120.
|
54 |
Chiu, C.T. (2008), "Use of ground tire rubber in asphalt pavements: Field trial and evaluation in Taiwan", J. Resource. Conserv. Recycl., 52(3), 522-532.
DOI
|
55 |
Dash, S.K. Sireesh, S. and Sitharam, T.G. (2003), "Model studies on circular footing supported on geocell reinforced sand underlain by soft clay", Geotext. Geomembr., 21(4), 197-219.
DOI
|
56 |
Dammala, P., Reddy, B.S. and Murali Krishna, A. (2015), "Experimental investigation of applicability of sandtire chip mixtures as retaining wall backfill, Proceedings of the International Foundations Congress and Equipment Expo 2015, San Antonio, Texas, U.S.A., March.
|