[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/gae.2015.9.2.207

Study on the response of circular thin plate under low velocity impact

Babaei, Hashem (Department of Mechanical Engineering, Faculty of Engineering, University of Guilan)
Mostofi, Tohid Mirzababaie (Department of Mechanical Engineering, Faculty of Engineering, University of Guilan)
Alitavoli, Majid (Department of Mechanical Engineering, Faculty of Engineering, University of Guilan)

Publication Information

Geomechanics and Engineering / v.9, no.2, 2015 , pp. 207-218 More about this Journal

Abstract

In this paper, forming of fully clamped circular plate by using low velocity impact system has been investigated. This system consists of liquid shock tube and gravity drop hammer. A series of test on mild steel and aluminum alloy plates has been done. The effect of varying both impact load and the plate material on the deflection are described. This paper also presents a simple model to prediction of mid-point deflection of circular plate by using input-output experimental data. In this way, singular value decomposition (SVD) method is used in conjunction with dimensionless number incorporated in such complex process. The results of obtained model have very good agreement with experimental data and it provides a way of studying and understanding the plastic deformation of impact loads.

Keywords

circular plate; deformation; impact; low velocity;

Citations & Related Records

Reference

1	Astrom, K.J. and Eykhoff, P. (1971), "System identification, a survey", Automatica, 7(2), 123-162. DOI
2	Babaei, H. (2014), "Prediction of Deformation of Circular Plates Subjected to Impulsive Loading Using GMDH-type Neural Network", Int. J. Eng. (IJE), TRANSACTIONS A: Basics, 27(10), 1635-1644.
3	Cirak, F., Deiterding, R. and Mauch, S.P. (2007), "Large-scale fluid-structure interaction simulation of viscoplastic and fracturing thin-shells subjected to shocks and detonations", Comput. Struct., 85(11), 1049-1065. DOI
4	Gerdooei, M. and Dariani, B.M. (2008), "Strain-rate-dependent forming limit diagrams for sheet metals", P. I. Mech. Eng. B-J. Eng., 222(12), 1651-1659.
5	Gharababaei, H., Nariman-Zadeh, N. and Darvizeh, A. (2010), "A simple modelling method for deflection of circular plates under impulsive loading using dimensionless analysis and singular value decomposition", J. Mech., 26(3), 355-361. DOI
6	Jacob, N., Nurick, G.N. and Langdon, G.S. (2007), "The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads", Eng. Struct., 29(10), 2723-2736. DOI
7	Johnson, W. (1972), Impact Strength of Materials, Edward Arnold, London, UK.
8	Jones, N. (1989), Structural Impact, Cambridge University Press, Cambridge, UK.
9	Jacob, N., Nurick, G.N. and Langdon, G.S. (2007), "The effect of stand-off distance on the failure of fully clamped circular mild steel plates subjected to blast loads", Eng. Struct., 29(10), 2723-2736. DOI
10	Kim, T., Kim, H., Bae, J., Lee, S. and Kang, C. (2008), "Semi-solid die forging of al6061 wrought aluminum alloy with electromagnetic stirring", P. I. Mech. Eng. B-J. Eng., 222(9), 1083-1095.
11	Kosing, O.E. and Skews, B.W. (1998), "An investigation of high-speed forming of circular plates in a liquid shock tube", Int. J. Impact. Eng., 21(9), 801-816. DOI
12	Nurick, G.N. and Martin, J.B. (1989a), "Deformations of thin plates subjected to impulsive loading - A review; Part I - Theoretical considerations", Int. J. Impact. Eng., 8(2), 159-170. DOI
13	Nurick, G.N. and Martin, J.B. (1989b), "Deformation of thin plates subjected to impulsive loading - A review; Part II - Experimental studies", Int. J. Impact. Eng., 8(2), 170-186.
14	Zheng, T., Zhang, S.H., Sorgente, D., Tricarico, L. and Palumbo, G. (2007), "Approach of using a ductile fracture criterion in deep drawing of magnesium alloy cylindrical cups under non-isothermal condition", P. I. Mech. Eng. B-J. Eng., 221(6), 981-986.
15	Safikhani, R., Hashemi, R. and Assempour, A. (2008), "The strain gradient approach for determination of forming limit stress and strain diagrams", P. I. Mech. Eng. B-J. Eng., 222(4), 467-483.

Reference

4	Hashem Babaei. (2015) Structural Engineering and Mechanics Effect of gas detonation on response of circular plate-experimental and theoretical / 56 (4) , 535
	Hashem Babaei. (2015) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science Experimental investigation and analytical modelling for forming of circular-clamped plates by using gases mixture detonation / , 095440621561433
	Hashem Babaei. (2017) Powder Technology Gas mixture detonation method, a novel processing technique for metal powder compaction: Experimental investigation and empirical modeling / 315 , 171
2	Sergey S. Volkov. (2016) Structural Engineering and Mechanics Axisymmetric bending of a circular plate with stiff edge on a soft FGM layer / 59 (2) , 227
6	H. Babaei. (2016) Experimental Techniques Empirical Modelling for Prediction of Large Deformation of Clamped Circular Plates in Gas Detonation Forming Process / 40 (6) , 1485
1	Hashem Babaei. (2016) Geomechanics and Engineering Dynamic compaction of cold die Aluminum powders / 10 (1) , 109
5	Hashem Babaei. (2017) Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering On dimensionless numbers for the dynamic plastic response of quadrangular mild steel plates subjected to localized and uniform impulsive loading / 231 (5) , 939
	Tohid Mirzababaie Mostofi. (2016) Thin-Walled Structures Theoretical analysis on the effect of uniform and localized impulsive loading on the dynamic plastic behaviour of fully clamped thin quadrangular plates / 109 , 367
	Hashem Babaei. (2020) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications Modeling and prediction of fatigue life in composite materials by using singular value decomposition method / , 146442071666087
	A Jamali. (2016) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications Multi-objective optimum design of ANFIS for modelling and prediction of deformation of thin plates subjected to hydrodynamic impact loading / , 146442071666033
2	(2017) Geomechanics & engineering An innovative vibration barrier by intermittent geofoam - A numerical study / 13 (2) , 269
12	(2019) Proceedings of the Institution of Mechanical Engineers. Part L, Journal of materials, design and applications Experimental and empirical study of large transverse deformation of triangular plates subjected to water hammer shock loading / 233 (12) , 2498