1 |
Altindag, R. (2003), "Estimation of penetration rate in percussive drilling by means of coarseness index and mean particle size", Rock Mech. Rock Eng., 36(4), 323-332.
DOI
|
2 |
Angseryd, J., From, A., Wallin, J., Jacobson, S. and Norgren, S. (2013), "On a wear test for rock drill inserts", Wear, 301(1-2), 109-115.
DOI
|
3 |
Anon (1989), British Standard 1796-1: 1989, ISO 2591-1: 1988. Test sieving: Methods using test sieves of woven wire cloth and perforated metal plate.
|
4 |
ASTM B611-85 (2000), Standard Test Method for Abrasive Wear Resistance of Cemented Carbides; Annual Book of ASTM Standards, West Conshohocken, PA, USA.
|
5 |
ASTM G65-04 (2010), Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus; Annual Book of ASTM Standards, West Conshohocken, PA, USA.
|
6 |
Beste, U. and Jacobson, S. (2008), "A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons", Wear, 264(11-12), 1129-1141.
DOI
|
7 |
Beste, U., Coronel, E. and Jacobson, S. (2006), "Wear induced material modification of cemented carbide rock drills", Int. J. Refract. Met. Hard. Mater., 24(1-2),168-176.
DOI
|
8 |
British Standards Institution (1989), Test Sieving Part 1: Methods using test sieves of woven wire cloth and perforated metal plate; Sieve Analysis.
|
9 |
Dahl, F., Bruland, A., Jakobsen, P.D., Nilsen, B. and Grov, E. (2012), "Classifications of properties influencing the drillability of rocks, based on the NTNU/SINTEF test method", Tunn. Undergr. Space Technol., 28, 150-158.
DOI
|
10 |
Ersoy, A. and Waller, M.D. (1995), "Wear characteristics of PDC pin and hybrid core bits in rock drilling", Wear, 188(1-2), 150-165.
DOI
|
11 |
Ersoy, A. and Waller, M.D. (1997), "Drilling detritus and the operating parameters of thermally stable PDC core bits", Int. J. Rock Mech. Min. Sci., 34(7), 1109-1123.
DOI
|
12 |
ISRM (1978), Suggested method for petrographic description of rocks; Committee on laboratory test: Document No. 2, Int. J. Rock Mech. Min. Sci. Geomech. Abstracts, 15(2), 41-45.
|
13 |
ISRM (2007), The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974-2006; Prepared by the Commission on Testing Methods, The ISRM Turkish National Group, Ankara, Turkey, 628 p.
|
14 |
Larsen-Basse, J. (1973), "Wear of hard-metals in rock drilling; A survey of the literature", Powder Metall., 16(31), 1-32.
DOI
|
15 |
NICICO (2011), Geological Report; National Iranian copper industry.
|
16 |
Okubo, S., Fukui, K. and Nishimatsu, Y. (2011), "Estimating abrasivity of rock by laboratory and in situ tests", Rock Mech. Rock Eng., 44(2), 231-244.
DOI
|
17 |
Olovsjo, S., Johanson, R. Falsafi, F., Bexell, U. and Olsson, M. (2013), "Surface failure and wear of cemented carbide rock drill buttons - The importance of sample preparation and optimized microscopy settings", Wear, 302(1-2), 1546-1554.
DOI
|
18 |
Perrot, C.M. (1980), "Abrasive wear of hard metals rock bits", Proceedings of the Conference on Lubrication, Friction and Wear in Engineering, Melbourne, Australia, December.
|
19 |
Pfleider, E.P. and Blake, R.L. (1953), "Research on the cutting action of the diamond drill bit", Min. Eng., 5, 187-195.
|
20 |
Plinninger, R.J. (2010), Hard Rock Abrasivity Investigation Using the Rock Abrasivity Index (RAI), Geologically Active, (Williams et al. Eds.), Taylor & Francis Group, London, UK, 3445-3452.
|
21 |
Plinninger, R.J., Spaun, G. and Thuro, K. (2002), "Predicting tool wear in drill and blast", Tunn. Tunnell. Int. Mag., 34(4), 38-41.
|
22 |
Rostami, J., Ghasemi, A., Gharahbagh, E.A., Dogruoz, C. and Dahl, F. (2014), "Study of dominant factors affecting cerchar abrasivity index", Rock Mech. Rock Eng., 47(5), 1905-1919.
DOI
|
23 |
Singh, B. and Goel, R.K. (2011), Engineering Rock Mass Classification, Elsevier, Waltham, MA, USA.
|
24 |
Thakare, M.R., Wharton, J.A., Wood, R.J.K. and Menger, C. (2012), "Effect of abrasive particle size and the influence of microstructure on the wear mechanisms in wear-resistant materials", Wear, 276-277, 16-28.
DOI
|
25 |
Thuro, K. (1997), "Drillability prediction: Geological influences in hard rock drill and blast tunneling", Geol. Rundsch., 86(2), 42-438.
|