1 |
ASI (2010), Extreme loading for structures theoretical manual, Applied Science International, pp. 6-27.
|
2 |
Asprone, D., Nanni, A., Salem, H., Tagel-Din, H. (2010). "Applied element method analysis of porous GFRP barrier subjected to blast", Advances in Structural Engineering, Vol. 13, No. 1, pp. 153-169.
DOI
|
3 |
Ramancharla, P.K., Meguro, K. (2002). "Non-linear static modeling of dip-slip faults for studying ground surface deformation using applied element method", Structural Engineering/Earthquake Engineering of JSCE, Vol. 19, No. 2, pp. 169-178.
DOI
|
4 |
Ramancharla, P.K., Meguro, K. (2006). "3D Numerical modelling of faults for study of ground surface deformation using applied element method", Current Science, Vol. 91, No. 8, pp. 1026-1037.
|
5 |
Ristic, D., Yamada, Y., Iemura, H. (1986), Stress-strain based modeling of hysteretic structures under earthquake induced bending and varying axial loads, Research Report No. 86-ST-01, School of Civil Engineering, Kyoto University.
|
6 |
Salem, H., Mohssen, S., Nishikiori, Y., Hosoda, A. (2016). "Numerical collapse analysis of Tsuyagawa bridge damaged by Tohoku Tsunami", Journal of Performance of Constructed Facilities, Vol. 30, No. 6, pp. 04016065-1-04016065-12.
DOI
|
7 |
Seo, G.S. (2005), Protective Engineering, Chung Moon Gak, Paju, pp. 320-334.
|
8 |
TM 5-855-1 (1986), Fundamentals of protective design for conventional weapons, Department of Army.
|
9 |
Young, C.W. (1997), Penetration equations, SAND97-2426, Sandia National Laboratories.
|
10 |
MND (1998), Design criteria for protective structures, Ministry of National Defense.
|
11 |
Okamura, H., Maekawa K. (1991). Nonlinear analysis and constitutive models of reinforced concrete, Gihodo Co. Ltd, Tokyo.
|
12 |
Kernicky, T.P., Whelan, M.J., Weggel, D.C., Rice, C.D. (2014). "Structural identification and damage characterization of a masonry infill wall in a full-scale building subjected to internal blast load", Journal of Structural Engineering, Vol. 141, No. 1, D4014013-1-D4014013-13.
DOI
|
13 |
Cismasiu, C., Ramos, A.P., Moldovan, I.D., Ferreira, D.F., Filho, J.B. (2017). "Applied element method simulation of experimental failure modes in RC shear walls", Computers and Concrete, Vol. 19, No. 4, pp. 365-374.
DOI
|
14 |
Hanchak, S.J., Forrestal, M.J., Young, E.R., Ehrgott, J.Q. (1992). "Perforation of concrete slabs with 48 MPa (7 ksi) and 140 MPa (20 ksi) unconfined compressive strengths", International Journal of Impact Engineering, Vol. 12, No. 1, pp. 1-7.
DOI
|
15 |
Johns, R.V., Clubley, S.K. (2016). "The influence of structural arrangement on long-duration blast response of annealed glazing", International Journal of Solids and Structures, Vol. 97-98, pp. 370-388.
DOI
|
16 |
Meguro, K., Tagel-Din, H. (2000). "Applied element method for structural analysis: Theory and application for linear materials", Structural Engineering/Earthquake Engineering of JSCE, Vol. 17, No. 1, pp. 21-35.
|
17 |
Khalil, A., Helmy, H., Tageldin, H., Salem, H. (2017). "Ship impact and nonlinear dynamic collapse analysis of a single well observation platform", In Structures Congress 2017 ASCE, pp. 668-680.
|
18 |
Krauthammer, T. (2008), Modern protective structures, CRC Press, pp. 24-38.
|
19 |
Ma, S.J., Jang, P.S. (2006), "An investigation into the actual condition of cast in place concrete lining in domestic tunnel", Journal of the Korean Society of Civil Engineers, Vol. 54, No. 12, pp. 68-79.
|
20 |
Meguro, K., Tagel-Din, H. (2001). "Applied element simulation of RC structures under cyclic loading", Journal of Structural Engineering, Vol. 127, No. 11, pp. 1295-1305.
DOI
|