Browse > Article
http://dx.doi.org/10.12652/Ksce.2013.33.6.2195

Effective Strengths of Concrete Struts in Strut-Tie Models of Reinforced Concrete Deep Beams  

Chae, Hyun Soo (Kyungpook National University)
Yun, Young Mook (Kyungpook National University)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.33, no.6, 2013 , pp. 2195-2209 More about this Journal
Abstract
The effective strength of concrete struts must be determined accurately for the reliable strut-tie model analysis and design of structural concrete. In this study, the equations of the effective strength, which are useful for the three types of determinate and indeterminate strut-tie models of reinforced concrete deep beams employed in current design codes, are proposed. The effects of shear span-to-effective depth ratio, compressive strength of concrete, and flexural and shear reinforcement ratios are reflected in the development of the proposed equations. To examine the appropriateness of the proposed equations, the strengths of 241 reinforced concrete deep beams, all tested to shear failure, are evaluated by using the three types of strut-tie models with the existing and proposed equations.
Keywords
Reinforced concrete; Deep beam; Strut-tie model; Effective strength of strut; Ultimate strength;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Tan, K. H., Kong, F. K., Teng, S. and Guan, L. (1995). "Highstrength concrete deep beams with effective span and shear span variations." ACI Structural Journal, Vol. 92, No. 4, pp. 572-582.
2 Tan, K. H., Kong, F. K., Teng, S. and Weng, L. W. (1997a). "Effect of web reinforcement on high-strength concrete deep beams." ACI Structural Journal, Vol. 94, No. 6, pp. 572-582.
3 Tan, K. H., Teng, S., Kong, F. K. and Lu, H. Y. (1997b). "Main tension steel in high strength concrete deep and short beams." ACI Structural Journal, Vol. 94, No. 5, pp. 752-768.
4 Teng, S., Kong, F. K., Poh, S. P., Guan, L. W. and Tan, K. H. (1996). "Performance of strengthened concrete deep beams predamaged in shear." ACI Structural Journal, Vol. 93, No. 2, pp. 159-171.
5 Thulimann, B. (1976). Shear strength of reinforced and prestressed concrete - CEB approach, Special Publication 59-6, American Concrete Institute, Detroit, USA.
6 Yun, Y. M. (2005). "Effective strength of concrete strut in strut-tie model (I): Methods for determining effective strength of concrete strut." Journal of the Korean Society of Civil Engineers, Vol. 25, No. 1, pp. 49-59 (in Korean).   과학기술학회마을
7 ACI Subcommittee 445 (2002). Examples for the design of structural concrete with strut-and-tie models, Special Publication SP-208, American Concrete Institute, Farmington Hills, Michigan, USA.
8 American Association of State Highway and Transportation Officials (2007). AASHTO LRFD bridge design specifications, 4th Edition, Washington D.C., USA.
9 American Association of State Highway and Transportation Officials (2010). AASHTO LRFD bridge design specifications, 5th Edition, Washington D.C., USA.
10 American Concrete Institute (2008). Building code requirements for structural concrete (ACI 318M-08) and commentary, Farmington Hills, Michigan, USA.
11 American Concrete Institute (2011). Building code requirements for structural concrete (ACI 318M-11) and commentary, Farmington Hills, Michigan, USA.
12 Chae, H. S. (2012). Indeterminate strut-tie models for reinforced concrete deep beams and corbels, Ph.D Dissertation, Kyungpook National University, Daegu, Korea, p. 290 (in Korean).
13 Bergmeister, K., Breen, J. E. and Jirsa, J. O. (1991). Dimensioning of the nodes and development of reinforcement, Structural Concrete, IABSE Colloquium, Stuttgart, Report, International Association for Bridge and Structural Engineering, Zurich, pp. 551-556.
14 Bergmeister, K., Breen, J. E., Jirsa, J. O. and Kreger, M. E. (1993). Detailing in structural concrete, Research Report 1127-3F, Center for Transportation Research, University of Texas at Austin, Texas, USA.
15 Canadian Standards Association (2004). Design of concrete structures for buildings, CSA A23.3-M04, Rexdale, Ontario, Canada.
16 Comite Euro-International du Beton (2010). CEP-FIP model code 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
17 Foster, S. J. and Gilbert, R. I. (1998). "Experimental studies on high-strength concrete deep beams." ACI Structural Journal, Vol. 95, No. 4, pp. 382-390.
18 Jeun, C. H. and Yun, Y. M. (2010). "Validity evaluation of effective strength of concrete strut using strut-tie model analysis of structural concrete." Journal of the Korean Society of Civil Engineers, Vol. 30, No. 5A, pp. 443-462 (in Korean).   과학기술학회마을
19 Kim, B. H. and Yun, Y. M. (2011). "An indeterminate strut-tie model and load distribution ratio for RC deep beams - (1) Model & Load distribution ratio." Advances in Structural Engineering, Vol. 14, No. 6, pp. 1031-1041.   DOI   ScienceOn
20 Kim, S. C. and Park, S. Y. (2005). "A study on shear steel effect on RC deep beams." Journal of the Korean Society of Civil Engineers, Vol. 25, No. 2, pp. 365-374 (in Korean).   과학기술학회마을
21 MacGregor, J. G. (1997). Reinforced concrete - mechanics and design, 3rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
22 Marti, P. (1985). "Basic tools of reinforced concrete beam design." Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56.
23 Nielsen, M. P., Braestrup, M. W., Jensen, B. C. and Bach, F. (1978). Concrete plasticity, beam shear - Shear in joints - Punching shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, Denmark.
24 Oh, J. K. and Shin, S. W. (2001). "Shear strength of reinforced high-strength concrete deep beams." ACI Structural Journal, Vol. 98, No. 2, pp. 164-173.
25 Schlaich, J., Schaefer, K. and Jennewein, M. (1987). "Towards a consistent design of structural concrete." Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151.
26 Shin, S. W., Lee, K. S., Moon, J. I. and Ghosh, S. K. (1999). "Shear strength of reinforced high-strength concrete beams with shear span-to-depth ratios between 1.5 and 2.5." ACI Structural Journal, Vol. 96, No. 4, pp. 549-556.
27 Smith, K. M. and Vantsiotis, A. S. (1982). "Shear strength of deep beams." ACI Material Journal, Vol. 79, No. 3, pp. 201-213.
28 Tan, K. H. and Lu, H. Y. (1999). "Shear behavior of large reinforced concrete deep beams and code comparisons." ACI Structural Journal, Vol. 96, No. 5, pp. 836-845.