Browse > Article
http://dx.doi.org/10.12652/Ksce.2010.30.5A.443

Validity Evaluation of Effective Strength of Concrete Strut using Strut-Tie Model Analysis of Structural Concrete  

Jeun, Chang Hyun ((주)평화엔지니어링 구조부)
Yun, Young Mook (경북대학교 건축토목공학부)
Publication Information
KSCE Journal of Civil and Environmental Engineering Research / v.30, no.5A, 2010 , pp. 443-462 More about this Journal
Abstract
The strut-tie model approach has proven to be effective in the ultimate analysis and design of structural concrete with disturbed regions. For the reliable analysis and design by the approach, however, the effective strength of concrete struts must be determined accurately. In this study, the validity of the effective strength of concrete struts, presented by the several design codes and many researchers including the author, was examined through the ultimate strength analysis of 24 reinforced concrete panels, 275 reinforced concrete deep beams, and 218 reinforced concrete corbels by using the conventional linear strut-tie model approach of current codes. The present study shows that the author's approach, resulting in an accurate and consistent evaluation of the ultimate strength of the panels, deep beams, and corbels, may reflect rationally the effects of primary variables including the types of strut-tie model and structural concrete, the conditions of load and geometry, and the strength of concrete in the strut-tie model analysis and design of structural concrete.
Keywords
effective strength; concrete strut; strut-tie model; structural concrete; analysis and design;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 김병헌, 윤영묵(2008) 단순지지 깊은 보 부정정 스트럿-타이 모델의 하중분배율 (I) : 하중분배율의 제안, 대한토목학회논문집, 대한토목학회, 제28권 제2A호, pp. 259-267.
2 김성칠, 박성용(2005) 철근콘크리트 깊은 보의 전단철근 효과에 관한 연구, 대한토목학회논문집, 대한토목학회, 제25권 제2A호, pp. 365-373.
3 윤영묵(2005) 스트럿-타이 모델에서 콘크리트 스트럿의 유효강도 (I) : 결정방법의 소개, 대한토목학회논문집, 대한토목학회, 제25권 제1A호, pp. 49-59.
4 한국콘크리트학회(2007) 콘크리트 구조부재의 스트럿-타이 모델설계 예제집 (KCI-M-06-001), 기문당, 220쪽.
5 ACI Subcommittee 445 (2002) Examples for the Design of Structural Concrete with Strut-and-Tie Models; SP-208, American Concrete Institute, Farmington Hills, Michigan, USA.
6 Anderson, N.S. and Ramirez, J.A. (1987) Effect of the Detailing of Stirrup Reinforcement on the Ultimate Strength and Behavior of Reinforced Concrete Members Failing in Shear, Publication No. CE-STR-87-2, School of Civil Engineering, Purdue University, Indiana, p. 380.
7 American Concrete Institute (2005) Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), Farmington Hills, Michigan, USA.
8 American Concrete Institute (2008) Building Code Requirements for Structural Concrete (ACI 31M8=08) and Commentary, Farmington Hills, Michigan, USA.
9 American Association of State Highway and Transportation Officials (2004) AASHTO LRFD Bridge Design Specifications, 3th Edition, Washington D.C., USA.
10 American Association of State Highway and Transportation Officials (2007) AASHTO LRFD Bridge Design Specifications, 4th Edition, Washington, D.C., USA.
11 Alshegeir, A. (1992) Analysis and Design of Disturbed Regions with Strut-tie Models, Ph.D Dissertation, School of Civil Engineering, Purdue University, Indiana, USA.
12 Barton, D.L., Anderson, R.B., Bouadi, A., Jirsa, J.O., and Breen, J.E. (1991) An Investigation of Strut-And-Tie Models for Dapped Beam Details, Research Report 1127-1, Center for Transportation Research, The University of Texas at Austin, Texas, p. 187.
13 Bergmeister, K., Breen, J.E., and Jirsa, J.O. (1991) Dimensioning of the Nodes and Development of Reinforcement, Structural Concrete, IABSE Colloquium, Stuttgart, Report, International Association for Bridge and Structural Engineering, Zurich, pp. 551-556.
14 Brown, M.D., Sankovich, C.L., Bayrak, O., and Jirsa, J.O. (2006) Behavior and Efficiency of Bottle-Shaped Struts, ACI Structural Journal, Vol. 103, No. 3, pp. 348-355.
15 Canadian Standards Association (1984) Design of Concrete Structures for Buildings, CAN3-A23.3-M84, Rexdale, Ontario, Canada.
16 Comite Euro-International Du Beton (1993) CEB-FIP model code 1990, Thomas Telford Services, Ltd., London, p. 437.
17 Foster, S.J., Powell, R.E., and Selim, H.S. (1996) Performance of high-strength concrete corbels, ACI Structural Journal, Vol. 93, No. 5, pp. 555-563.
18 Foster, S.J. and Gilbelt, R.I. (1998) Experimental studies on highstrength concrete deep beams, ACI Structural Journal, Vol. 95, No. 4, pp. 382-390.
19 Kong, P.Y.L. and Rangan, B.V. (1998) Shear strength of high-performance concrete beams, ACI Structural Journal, Vol. 95, No. 6, pp. 677-688.
20 Kriz, L.B. and Raths, C.H. (1965) Connections in precast concrete structures - strength of corbels, PCI Journal, Vol. 10, No. 1, pp. 16-61.   DOI
21 Nielsen, M.P., Braestrup, M.W., Jensen, B.C., and Bach, F. (1978) Concrete Plasticity, Beam Shear - Shear in Joints - Punching Shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, Denmark.
22 MacGregor, J.G. (1997) Reinforced Concrete - Mechanics and Design, 3rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
23 Marti, P. (1985) Basic tools of reinforced concrete beam design, Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56.
24 Mattock, A. H., Chen, K. C., and Soongswang, K. (1976) The behavior of reinforced concrete corbels, PCI Journal, Vol. 21, No. 2, pp. 52-77.   DOI
25 Oh, J.K. and Shin, S.W. (2001) Shear strength of reinforced highstrength concrete deep beams, ACI Structural Journal, Vol. 98, No. 2, pp. 164-173.
26 Portland Cement Association (2004) AASHTO LRFD Strut-Tie Model Design Examples, Skokie, Illinois, USA.
27 Ramirez, J.A. and Breen, J.E. (1983) Proposed Design Procedure for Shear and Torsion in Reinforced and Prestressed Concrete, Research Report 248-4F, Center for Transportation Research, University of Texas at Austin, Texas, USA.
28 Schlaich, J., Schaefer, K., and Jennewein, M. (1987) Towards a consistent design of structural concrete, Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151.
29 Shin, S.W., Lee, K.S., Moon, J., and Ghosh, S.K. (1999) Shear Strength of Reinforced High-Strength Concrete Beams with Shear Span-to-Depth Ratios between 1.5 and 2.5, ACI Structural Journal, Vol. 96, No. 4, pp. 549-556.
30 Smith, K.M. and Vantsiotis, A.S. (1982) Shear strength of deep beams, ACI Material Journal, Vol. 79, No. 3, pp. 201-213.
31 Tan, K.H., Kong, F.K., Teng, S., and Guan, L. (1995) High-strength concrete deep beams with effective span and shear span variations, ACI Structural Journal, Vol. 92, No. 4, pp. 572-582.
32 Tan, K.H., Kong, F.K., Teng, S., and Weng, L.W. (1997a) Effect of web reinforcement on high-strength concrete deep beams, ACI Structural Journal, Vol. 94, No. 6, pp. 572-582.
33 The International Federation for Structural Concrete(fib) (1999) Structural Concrete; Textbook on Behavior, Design and Performance Updated Knowledge of the CEB/FIP Model Code 1999 Volume 3, The International Federation for Structural Concrete(fib), Lausanne, Switzerland.
34 Tan, K.H., Teng, S., Kong, F.K., and Lu, H.Y (1997b) Main tension steel in high strength concrete deep and short beams, ACI Structural Journal, Vol. 94, No. 5, pp. 752-768.
35 Tan, K.H. and Lu, H.Y (1999) Shear behavior of large reinforced concrete deep beams and code comparisons, ACI Structural Journal, Vol. 96, No. 5, pp. 836-845.
36 Teng, S., Kong, F.K., Poh, S.P., Guan, L.W., and Tan, K.H. (1996) Performance of strengthened concrete deep beams predamaged in shear, ACI Structural Journal, Vol. 93, No. 2, pp. 159-171.
37 Thurlimann, B. (1976) Shear strength of reinforced and prestressed concrete - CEB approach, Special Publication 59-6, American Concrete institute, Detroit, USA.
38 Yun, Y.M. (2000) Nonlinear strut-tie model approach for structural concrete, ACI Structural Journal, Vol. 97, No. 4, pp. 581-590.