Browse > Article
http://dx.doi.org/10.7316/KHNES.2020.31.2.184

Calculation and Comparison of Thermodynamic Properties of Hydrogen Using Equations of State for Compressed Hydrogen Storage  

PARK, BYUNG HEUNG (School of Chemical and Material Engineering, Korea National University of Transportation)
Publication Information
Transactions of the Korean hydrogen and new energy society / v.31, no.2, 2020 , pp. 184-193 More about this Journal
Abstract
One of the technical methods to increase the volumetric energy density of hydrogen is to pressurize the gaseous hydrogen and then contain it in a rigid vessel. Especially for automotive systems, the compressed hydrogen storage can be found in cars as well as at refueling stations. During the charging the pressurized hydrogen into a vessel, the temperature increases with the amount of stored hydrogen in the vessel. The temperature of the vessel should be controlled to be less than a limitation for ensure stability of material. Therefore, the accurate estimation of temperature is of significance for safely storing the hydrogen. In this work, three well-known cubic equations of state (EOSs) were adopted to examine the accuracy in regenerating thermodynamic properties of hydrogen within the temperature and pressure ranges for the compressed hydrogen storage. The formulations representing molar volume, internal energy, enthalpy, and entropy were derived for Redlich-Kwong (RK), Soave-Redlioch-Kwong (SRK), and Peng-Robinson (PR) EOSs. The calculated results using the EOSs were compared with literature data given by NIST. It was revealed that the accuracies of RK and SRK EOSs were satisfactorily compatible and better than the results by PR EOS.
Keywords
Compressed hydrogen; Equation of state; Enthalpy; Internal energy; Hydrogen density;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 A. Zuttel, "Hydrogen storage methods", Naturwissenschaften, Vol. 91, 2004, pp. 157-172, doi: https://doi.org/10.1007/s00114-004-0516-x.   DOI
2 A. Zuttel, A. Remhof, A. Borgschulte, and O. Freidrichs, "Hydrogen: the future energy carrier", Phil. Trans. R. Soc. A, Vol. 368, 2010, pp. 3329-3342, doi: https://doi.org/10.1098/rsta.2010.0113.   DOI
3 T. Q. Hua, R. K. Ahluwalia, J. K. Peng, M. Kromer, S. Lasher, K. McKenney, K. Law, and J. Sinha, "Technical assessment of compressed hydrogen storage tank system for automotive applications", Int. J. Hydrogen Energy, Vol. 36, No. 4, 2011, pp. 3037-3049, doi: https://doi.org/10.1016/j.ijhydene.2010.11.090.   DOI
4 R. K. Ahluwalia, T. Q. Hua, J. K. Peng, S. Lasher, K. McKenney, J. Shinha, and M. Gardiner, "Technical assessment of cryo-compressed hydrogen storage tank systems for automotive applications", Int. J. Hydrogen Energy, Vol. 35, No. 9, 2010, pp. 4171-4184, doi: https://doi.org/10.1016/j.ijhydene.2010.02.074.   DOI
5 B. Sakintuna, F. Lamari-Darkrim, and M. Hirscher, "Metal hydride materials for solid hydrogen storage: a review", Int. J. Hydrogen Energy, Vol. 32, No. 9, 2007, pp. 1121-1140, doi: https://doi.org/10.1016/j.ijhydene.2006.11.022.   DOI
6 M. Hosseini, I. Dincer, G. F. Naterer, and M. A. Rosen, "Thermodynamic analysis of filling compressed gaseous hydrogen storage tanks", Int. J. Hydrogen Energy, Vol. 37, No. 6, 2012, pp. 5063-5071, doi: https://doi.org/10.1016/j.ijhydene.2011.12.047.   DOI
7 Society of Automotive Engineers (SAE), "Fueling protocols for light duty gaseous hydrogen su rface vehicles (Standard J2601_201407)", SAE International, 2014, doi: https://doi.org/10.4271/j2601_201407.
8 R. Ortiz Cebolla, B. Acosta, N. de Miguel, and P. Moretto, "Effect of precooled inlet gas temperature and mass flow rate on final state of charge during hydrogen vehicle refueling", Int. J. Hydrogen Energy, Vol. 40, No. 13, 2015, pp. 4698-4706, doi: https://doi.org/10.1016/j.ijhydene.2015.02.035.   DOI
9 Society of Automotive Engineers (SAE), "Fueling protocols for light duty gaseous hydrogen su rface vehicles (Standard J2601_201612)", SAE International, 2016, doi: https://doi.org/10.4271/j2601_201612.
10 M. Monde, P. Woodfiled, T. Takano, M. Kosaka, "Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressure of 35 and 70 MPa", Int. J. Hydrogen Energy, Vol. 37, No. 7, 2012, pp. 5723-5734, doi: https://doi.org/10.1016/j.ijhydene.2011.12.136.   DOI
11 E. W. Lemmon and M. L. Huber, "Revised standarized equation for hydrogen gas densities for fuel comsumption applications", J. Res. Natl. Stand. Technol., Vol. 113, No. 6, 2008, pp. 341-350, doi: https://doi.org/10.6028/jres.113.028.   DOI
12 N. Sakoda, K. Shindo, K. Shinzato, M. Kohno, Y. Takata, and M. Fujii, "Review of the thermodynamic properties of hydrogen based on existing equations of state", Int. J. Thermodynamics, Vol. 31, 2010, pp. 276-296, doi: https://doi.org/10.1007/s10765-009-0699-7.   DOI
13 H. Chen, J. Zheng, P. Xu, L. Li, Y. Liu, and H. Bie, "Study on real-gas equations of high pressure hydrogen", Int. J. Hydrogen Energy, Vol. 35, No. 7, 2010, pp. 3100-3104, doi: https://doi.org/10.1016/j.ijhydene.2009.08.029.   DOI
14 J. O. Valderrama, "The state of the cubic equations of state", Ind. Eng. Chem. Res., Vol. 42, No. 8, 2003, pp. 1603-1618, doi: https://doi.org/10.1021/ie020447b.   DOI
15 J. M. Smith, H. Van Ness, M. Abbott, and M. Swihart, "Introduction to chemical engineering thermodynamics", 8th ed., McGraw-Hill, USA, 2018.
16 B. E. Poling, J. M. Prausnitz, and J. P. O'Connell, "The properties of gases and liquids", 5th ed., McGraw-Hill, USA, 2001.
17 B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equation of state", Trans. Korean Hydrogen New Energy Soc., Vol. 30, No. 5, 2019, pp.385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385.
18 The National Institute of Standards and Technology (NIST), "NIST Chemistry WebBook", NIST, 2018, doi: https://doi.org/10.18434/T4D303.