1 |
G. Hu, J. Fan, S. Chen, Y. Liu, and K. Cen, "Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields", J. Power Sources, Vol. 136, 2004, pp. 1-9.
DOI
|
2 |
W. M. Yan, C. H. Yang, C. Y. Soong, F. Chen, and S. C. Mei, "Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells", J. Power Sources, Vol. 160, 2006, pp. 284-292.
DOI
|
3 |
R. Roshandel, F. Arbabi, and G. K. Moghaddam, "Simulation of an innovative flow-field design based on a bio inspired pattern for PEM fuel cells", Renewable Energy, Vol. 41, 2012, pp. 86-95.
DOI
|
4 |
X. Zhou, W. Ouyang, C. Liu, T. Lu, W. Xing, and L. An, "A new flow field and its two-dimension model for polymer electrolyte membrane fuel cells (PEMFCs)", J. Power Sources, Vol. 158, 2006, pp. 1209-1221.
DOI
|
5 |
X. D. Wang, X. X. Zhang, W. M. Yan, D. J. Lee, and A. Su, "Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designs", Int. J. Hydrogen Energy, Vol. 34, 2009, pp. 3823-3832.
DOI
|
6 |
B. Kim, Y. Lee, A. Woo, and Y. Kim, "Effects of cathode channel size and operating conditions on the performance of air-blowing PEMFCs", Applied Energy, Vol. 111, 2013, pp. 441-448.
DOI
|
7 |
H. Ju and J. Nam, "Numerical Study of Land/Channel Flow- Field Optimization in Polymer Electrolyte Fuel Cells (PEFCs) (II)", The Korean Society of Mechanical Engineers, Vol. 33, 2009, pp. 688-698.
DOI
|
8 |
Y. G. Yoon, W. Y. Lee, G. G. Park, T. H, Yang, and C. S. Kim, "Effects of channel configurations of flow field plates on the performance of a PEMFC", Electrochimica Acta, Vol. 50, 2004, pp. 709-712.
DOI
|
9 |
S. Shimpalee and J. W. Van Zee, "Numerical studies on rib & channel dimension of flow-field on PEMFC performance", Int. J. Hydrogen Energy, Vol. 32, 2007, pp. 842-856.
DOI
|
10 |
H. Ju, "Numerical Study of Land/Channel Flow-field Optimization in Polymer Electrolyte Fuel Cells (PEFCs) (I), The Korean Society of Mechanical Engineers, Vol. 32, 2008, pp. 683-694.
DOI
|
11 |
K. Jiao, Y. Zhou, Q. Du, Y. Yin, S. Yu, and X. Li, "Numerical simulations of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with various flow channel designs", Applied Energy, Vol. 104, 2013, pp. 21-41.
DOI
|
12 |
J. Lobato, P. Canizares, M. A. Rodrigo, F. Javier Pinar, and D. Ubeda, "Study of flow channel geometry using current distribution measurement in a high temperature polymer electrolyte membrane fuel cell", J. Power Sources, Vol. 196, 2011, pp. 4209-4217.
DOI
|
13 |
J. Lobato, P. Canizares, M. A. Rodrigo, F. Javier Pinar, E. Mena, and D. Ubeda, "Three-dimensional model of a 50cm2 high temperature PEM fuel cell. Study of the flow channel geometry influence", Int. J. Hydrogen Energy, Vol. 35, 2010, pp. 5510-5520.
DOI
|
14 |
H. Ju, "Investigation of the effects of the anisotropy of gas diffusion layers on heat and water transport in polymer electrolyte fuel cells", J. Power Sources, Vol. 191, 2009, pp. 259-268.
DOI
|
15 |
P. Chippar and H. Ju, "Three-dimensional non-isothermal modeling of a phosphoric acid-doped polybenzimidazole (PBI) membrane fuel cell", Solid State Ionics, Vol. 225, 2012, pp. 30-39.
DOI
|
16 |
W. He, J. Yi, and T. Nguyen, "Two-Phase Flow Model of the Cathode of PEM Fuel Cells Using Interdigitated Flow Fields", AIChE Journal, Vol. 46, 2000, pp. 2053-2064.
DOI
|
17 |
K. Jiao and X. Li, "A three-dimensional non-isothermal model of high temperature proton exchange membrane fuel cells with phosphoric acid doped polybenzimidazole membranes", Fuel Cells, Vol. 10, 2010, pp. 351-362.
DOI
|
18 |
F. P. Incropera, D. P. Dewitt, T. L. Bergman, and A. S. Lavine, "Fundamentals of heat and mass transfer sixth edition", John Wiley & Sons, 2007.
|