Enhancement of Mechanical Strength Using Nano Aluminum Reinforced Matrix for Molten Carbonate Fuel Cell |
Kim, Hyung-Suk
(Fuel Cell Research Center, Korea Institute of Science and Technology)
Song, Shin-Ae (Fuel Cell Research Center, Korea Institute of Science and Technology) Jang, Seong-Cheol (Fuel Cell Research Center, Korea Institute of Science and Technology) Park, Dong-Nyeock (Fuel Cell Research Center, Korea Institute of Science and Technology) Ham, Hyung-Chul (Fuel Cell Research Center, Korea Institute of Science and Technology) Yoon, Sung-Pil (Fuel Cell Research Center, Korea Institute of Science and Technology) Oh, Seong-Geun (Major in Chemical Engineering, Hanyang University) Han, Jong-Hee (Fuel Cell Research Center, Korea Institute of Science and Technology) Kim, Sung-Hyun (Department of Energy Environmental Policy Technology,Green School, Graduate school of Energy and Environment, Korea University) |
1 | L. Zhou, H. Lin, and B. Yi, "Sintering behavior of porous -lithium aluminate matrices in molten carbonate fuel cells at high temperature", J. Power Sources, Vol. 164, 2007, pp. 24-32. DOI |
2 | S. A. Song, J. Han, S. P. Yoon, S. W. Nam, I. H. Oh, and D. K. Choi, "Economic feasibility study for molten carbonate fuel cells fed with biogas", J. Electrochem. Sci. Tech., Vol. 1, 2010, p. 102. DOI |
3 | D. Marra, and B. Bosio, "Process analysis of 1MW MCFC plant", Int. J. Hydrog Energy Vol. 32, 2007, p. 809. DOI |
4 | Y. Y. Kim, J. H. Han, and T. H. Lim, "The effect of the matrix thickness on the long term performance of MCFC", Trans. of Korean Hydrogen and New Energy Society, Vol. 16, 2005, pp. 170-179. |
5 | K. Tanimoto, M. Yanagida, "Long-term operation of small-sized single molten carbonate fuel cells", J. Power Sources, Vol. 72, 1998, pp. 77-82. DOI ScienceOn |
6 | H. J. Chio, M. Y. Shin, S. H. Hyun, H. C. Lim, "Optimization of Rod-shaped γ-LiAlO2 Particle Reinforced MCFC Matrices by Aqueous Tape Casting", J. Korean Ceram. Soc., Vol. 46, 2009, pp. 282-287. 과학기술학회마을 DOI |
7 | H. C. Hahm, S. P. Yoon, J. Han, S. W. Nam, T.‐H. Lim, and S.‐A. Hong, "Development of reinforced matrix for molten carbonate fuel cells by using sintering aids", ECS Transactions, Vol. 5, No.1, 2007, p. 445. DOI |
8 | I. S. Lee, W. S. Kim, D. Y. Lee, "Influence of aluminum salt addition on in situ sintering of electrolyte matrices for molten carbonate fuel cells", J. of power sources, Vol. 34, 2001, pp. 90-95. |
9 | H. S. Hyun, C. S. Cho, "Reinforcement of molten carbonate fuel cell matrixes by adding rod-shaped gamma- particles", J. Mater. Sci., Vol. 36, 2001, p. 441. DOI |
10 | J.‐J. Lee, H. J. Choi, S. H. Hyun, and H. C. Lim, "Characteristics of aluminum‐reinforced matrices for molten carbonate fuel cells", J. Power Sources, Vol. 179, 2008, p. 504. DOI |
11 | J. E. Kim , K. Y. Patil, J. Han, S. P. Yoon, S. W Nam, T. H. Lim, "Using aluminum and particles to reinforce the a‐ matrix for molten carbonate fuel cells", Int. J. Hydrogen Energy, Vol. 34, 2009, p. 9227. DOI |
12 | M. R. Noordin, and K. Yong Liew (2010), "synthesis of alumina nanofibers and composites", Nanofibers, A. Kumar (Ed.), ISBN: 978-953-7619-86-2, InTech, Available from: http://www.intechopen.com/books/nanofibers/synthesis-of-alumina-nanofibers-and-composites |
13 | H.‐J. Choi, J‐J. Lee, S.‐H. Hyun, and H.‐C. Lim, "Phase and microstructural stability of electrolyte matrix materials for molten carbonate fuel cells", Fuel cells, Vol. 10, 2010, p. 613. DOI |
14 | J. -J. Lee, H. -J. Choi, S. -H. Hyun, H. -C. Im, "CHaracteristics of aluminum-reinforced -matrices for molten carbonate fuel cells", J. Powder Sources, Vol. 179, 2008, p. 504. DOI |
15 | S. H. Hyun, S. C. Cho, J. Y. Cho, D. H. Ko, J. Mater. Sci., Vol. 36, 2001, p. 441. DOI |
16 | U. Schubert, N. Husing, "Synthesis of inorganis materials", Third edtion, Wiley-VCH Verlag & CO. KGaA, Germany, 2012, p. 35. |