Bending Characteristics of DP980 Steel Sheets by the Laser Irradiation |
Song, J.H.
(한국생산기술연구원)
Zhang, Y. (한국생산기술연구원) Lee, J.S. (한국생산기술연구원) Park, S.J. (한국교통대학교) Choi, D.S. (인하공업전문대) Lee, G.A. (한국생산기술연구원) |
1 | J. Magee, J. Sidhu, R. L. Cooke, 2000, A Prototype Laser Forming System, Opt. Laser Eng., Vol. 34, No. 4-6, pp. 339-353 DOI |
2 | J. Kim, S. J. Na, 2005, Feedback Control for 2D Free Curve Laser Forming, Optics and Laser Technol., Vol. 37, No. 2, pp. 139-146. DOI |
3 | PROFORM, 2010, PROFORM publishable activity report, http://www.proform-ip.org. |
4 | H. B. Shim, D. W. Kim, 2009, A Study on the Shape Correction of Stamped Parts by the Irradia-tion of Laser, Trans. Mater. Process., Vol. 18, No. 7 , pp. 519-530 DOI |
5 | D. J. Majumdar, A. K. Nath, I. Manna, 2004, Studies on Laser Bending of Stainless Steel, Mater. Sci. Eng. A, Vol. 385, No. 1-2 , pp.113-122. DOI |
6 | J. Cheng, Y. L. Yao, 2004, Process Design of Laser Forming for Three-Dimensional Thin Plates, ASME J. Manuf. Sci. Eng., Vol. 126, No. 5, pp. 217-225. DOI |
7 | F. Vollertsen, 1994, An Analytical Model for Laser Bending, Lasers Eng., Vol. 2, No. 1, pp. 261-276. |
8 | A. K. Kyrsanidi, T. B. Kermanidis, S. G. Pantelakis, 2000, An Analytical Model for the Prediction of Distortions caused by the Laser Forming Process, J. Mater. Process. Technol., Vol. 104, No. 1-2, pp. 94-102. DOI |
9 | L. Zhang, P. Michaleris, 2004, Investigation of Lagrangian and Eulerian Finite Element Methods for Modeling the Laser Forming Process, Finite Elem. Anal. Des., Vol. 40, No. 4, pp. 383-405. DOI |
10 | W. Shichun, J. Zhong, 2002, FEM Simulation of the Deformation Field during the Laser Forming of Sheet Metal, J. Mater. Process. Technol., Vol. 121, No.2-3, pp. 269-272. DOI |
11 | H. S. Hsieh, J. Lin, 2004, Thermal-Mechanical Analysis on the Transient Deformation During Pulsed Laser Forming, Int. J. Mach. Tools Manuf., Vol. 44, No. 2-3, pp. 191-199. DOI |
12 | H. Shen, J. Hu, Z. Yao, 2010, Analysis and Control of Edge Effect in Laser Bending, Opt. Laser Eng., Vol. 48, No. 3, pp. 305-315. DOI |