Browse > Article
http://dx.doi.org/10.5228/KSPP.2007.16.4.317

Analysis on the Mechanism of Fluting in the Bending of Low Carbon Steels  

Park, K.C. (POSCO 기술연구소)
Yoon, J.B. (POSCO 기술연구소)
Publication Information
Transactions of Materials Processing / v.16, no.4, 2007 , pp. 317-322 More about this Journal
Abstract
In order to investigate the cause and condition of fluting in tangential bending of low carbon steel sheet, an analytic analysis, an experiment and a series of finite element analysis for bending process were done. The fluting in bended sheet was related with the yield point elongation of material. Due to the yield point elongation, unstable plastic hinge was occurred in course of bending of elastic perfectly plastic sheet. According to the analysis and computational results, lower yield point elongation than 5% was required to prevent fluting in 0.5-0.6t sheet in $15{\sim}25mm$ radius bending. The tendency of fluting occurrence was reduced as decreasing the radius of bending, increasing thickness of bended sheet, and removing irregularity in sheet and bending processes.
Keywords
Tangential Bending; Fluting; Aging; Yield Point Elongation; Finite Element Analysis of Bending; Low Carbon Steel; Plastic Hinge;
Citations & Related Records
연도 인용수 순위
  • Reference
1 W. C. Leslie, 1981, The Physical Metallurgy of Steels, International Student ed., McGraw-Hili International Book Company, pp. 74-90
2 R. Pearce, 1991, Sheet Metal Forming, The Adam Hilger Series on New Manufacturing Processes and Materials, lOP Publishing Ltd, pp. 191-195
3 M. Aratani, A. Tosaka, O. Furukimi, T. Obara, H. Kuguminato, 1997, The Effect of Deformation Conditions on the Occurrence of Fluting at 3-Piece Can Body Making, 鉄と鋼, Vol.83, No.4, p. 251
4 A. Tosaka, M. Aratani, H. Kuguminato, 1995, ThinGage and High-Strength N-added High-Strength Tin Mill Blackplates with Good Canning Properties, 川崎製鉄技報, Vol.27, No.3, pp. 169-176
5 阿部光延, 1997, 材質面からみたスキソパスと レベラ-の差異と問題点, 第171回塑性加工ツソポヅウム (レベラ - とスキンパスミルの形状矯正技術の現状と問題), pp. 11-18
6 太田哲, 1989, 프레스가공기술 매뉴얼, 기전연구사, p. 32
7 K. C. Park, S. M. Hwang, 2002, Development of a Finite Element Analysis Program for Roller Leveling and Application for Removing Blanking Bow Defects of Thin Steel Sheet, ISIJ International, Vol.42, No.9, pp. 990-999   DOI