1 |
D. T. Pham, S. S. Dimov, 2001, Rapid manufacturing, Springer-Verlag Limited., pp. 1-17
|
2 |
H. Zhang, G. Wang, Y. Luo, T. Nakaga, 2001, Rapid hard tooling by plasma spraying for injection molding and sheet metal forming, Thin Solid Film, Vol. 390, pp. 7-12
DOI
ScienceOn
|
3 |
A. Rosochowski, A. Matuszak, 2000, Rapid tooling: the state of the art, J. Mater. Proc. Tech., Vol. 106, pp.191-198
DOI
ScienceOn
|
4 |
A.P. Newbery, P.S. Grant, A.D. Roche, 1998, The electric arc spray manufacture of rapid production tooling: A case study, Proc. of the 15th Inter. Thermal Spray Conf., Nice, France, pp. 1223-1228
|
5 |
S. Wichmanowski, 2003, Pseudo-alloys for spray metal tooling, Adv. Mater. & Proc., pp. 33-34
|
6 |
M. L. Thorpe, J. W. Minge, 1981, Spray metal composite tooling, Proc. of the 26th National SAMPE Symp., Los Angels, USA., pp. 374-387
|
7 |
W. A. Zanchunk, L. J. Grant, 1989, The use of spray metal tooling for metal injection molding, Metal Powder Industries Federation, pp. 25-34
|
8 |
D. I. Wimpenny, G. J. Gibbons, 2003, Metal spray tooling for composite forming, J. Mater. Proc. Tech., Vol. 138, pp. 443-448
DOI
ScienceOn
|
9 |
R. E. Chalmers, 2001, Rapid tooling from Ford: Production dies made without machining, Manuf. Eng., pp. 36-41
|
10 |
T. Rayment, S. Hoile, P. S. Grant, 2004, Phase transformations and control of residual stresses in thick spray-formed steel shells, Metall. Mater. Trans. B, Vol. 35B, pp. 1113-1122
|
11 |
양동열, 손현기, 1999, 쾌속조형공정의 원리 및 특성, 기계저널, 제39권 제9호, pp. 28-31
|
12 |
박근, 이상찬, 정준호, 양동열, 윤재륜, 1996, 쾌속 3차원 조형법을 이용한 시작기술 및 시작금형 제작기술 개발, 대한기계학회논문집, 제 20권,pp.1582-1589
|
13 |
D. A. Jones, S. R. Duncan, T. Rayment, P. S. Grant, 2003, Control of temperature profile for a spray deposition process, IEEE Trans. on Control Systems Tech., Vol. 11, pp. 656-667
DOI
ScienceOn
|
14 |
P. S. Fussell, H. O. K Kirchner, F. B. Printz, L.E. Weiss, 1994, Controlled microstructure of arc-sprayed metal shells, J. Thermal Spray Tech., Vol. 3, pp. 148-161
DOI
|
15 |
T. Rayment, P. S. Grant, 2002, Optimization of an electric arc gun cluster design for the spray tooling process, Proc. of the 1st Inter. Surf. Eng. Congress and the 13th IFHTSE Congress, Columbus, Ohio, USA, pp. 505-514
|