1 |
T. J. Pinnavaia, G. W. Beall, 2000, Polymer-Clay Nanocomposites, John Wiley & Sons, New York, pp. 97~109.
|
2 |
W. Gong, J. Gao, M. Jiang, L. He, J. Yu, J. Zhu, 2011, Influence of Cell Structure Parameters on the Mechanical Properties of Microcellular Polypropylene Materials, J. Appl. Polym. Sci., Vol. 122, No. 5, pp. 2907~2914.
DOI
|
3 |
G. Dong, G. Zhao, Y. Guan, G. Wang, X. Wang, 2014, The Cell Forming Process of Microcellular Injection-Molded Parts, J. Appl. Polym. Sci., Vol. 131, No. 12, pp. 1~11.
|
4 |
S. T. Lee, D. Scholz, 2008, Polymeric Foams-Technology and Developments in Regulation, Process and Products, CRC Press, New York, pp.1~40.
|
5 |
J. S. Hwang, T. G. Choi, M. –Y. Lyu, D. –Y. Yang, 2015, Investigation for the Bending Modes of a Semi-circular Pyramidal Kagome Sandwich Structure and the Bending Load Calculation, Compos. Struct., Vol. 134, pp. 10~17.
DOI
|
6 |
P. Beardmore, C. F. Johnson, 1986, The Potential for Composites in Structural Automotive Applications, Compos. Sci. Technol., Vol. 26, No. 4, pp. 251~281.
DOI
|
7 |
K. V. Velde, P. Kiekens, 2001, Thermoplastic Pultrusion of Natural Fibre Reinforced Composites, Composite Structures, Vol. 54, No. 2-3, pp. 355-360.
DOI
|
8 |
M. Lee, H. Kim, M.-Y. Lyu, 2013, A Study on the Warpage of Glass Fiber Reinforced Plastics for part Design and Operation Condition: Part 2. Crystalline Plastics, Polym.- Kor., Vol. 36, No. 6, pp. 677~684.
DOI
|
9 |
D. Grauer, B. Hangs, M. Reif, A. Martsman, S. T. Jespersen, 2012, Improving Mechanical Performance of Automotive Underbody Shield with Unidirectional Tapes in Compression-Molded Direct-Long Fiber Thermoplastics (D-LFT), SAMPE J., Vol. 48, No. 3, pp. 7~15.
|
10 |
S. Y. Park, M.-Y. Lyu, 2014, Investigation of the Structural Robustness of Deep Depth Injection Mold with Cavity Pressure and Mold Design, Int. Polym. Proc., Vol. 29, No. 5, pp. 616~623.
DOI
|
11 |
Beverte, 2004, Deformation of Polypropylene Foam Neopolen® P in Compression, J. Cell. Plast., Vol. 40, No. 3, pp. 191~204.
DOI
|
12 |
N. Hossieny, A. Ameli, C. B. Park, 2013, Characterization of Expanded Polypropylene Bead Foams with Modified Steam-Chest Molding, Ind. Eng. Chem. Res., Vol. 52, No. 24, pp. 8236~8247.
DOI
|
13 |
J. Rossacci, S. Shivkumar, 2003, Bead Fusion in Polystyrene Foams, J. Mater. Sci., Vol. 38, No. 2, pp. 201~206.
DOI
|
14 |
D. Matson, M., R. Venkatesh, S. Biederman, 2007, Expanded Polystyrene Lost Foam Casting—Modeling Bead Steaming Operations, J. Manuf. Sci. Eng., Vol. 129, No. 2, pp. 425~434.
DOI
|
15 |
D. Raps, N. Hossieny, C. B. Park, Volker Altstadt, 2015, Past and Present Developments in Polymer Bead Foams and Bead Foaming Technology, Polymer, Vol. 56, pp. 5~19.
DOI
|
16 |
A. Harper, 1998, MIT Offers Economic Route to High Volume RTM, Reinf. Plast., Vol. 5, No. 42, pp. 28~33.
|
17 |
C. R. Wang, Y. Z. Gu, K. M. Zhang, M. Li, Z. G. Zhang, 2013, Rapid Curing Epoxy Resin and Its Application in Carbon Fibre Composite Fabricated Using VARTM Moulding, Polym. Polym. Compos., Vol. 21, No. 5, pp. 315~324.
|
18 |
J. Lee, L. S. Turng, E. Dougherty, P. Gorton, 2011, Novel Foam Injection Molding Technology Using Carbon Dioxide‐Laden Pellets, Polym. Eng. Sci., Vol. 51, No. 11, pp. 2295~2303.
DOI
|
19 |
M.-Y. Lyu, T. G. Choi, 2015, Research Trends in Polymer Materials for Use in Lightweight Vehicles, Int. J. Precis. Eng. Manuf., Vol. 16, No. 1, pp. 213~220.
DOI
|
20 |
X. Sun, L.-S. Turng, 2014, Novel Injection Molding Foaming Approaches Using Gas-laden Pellets with N2, CO2, and N2 + CO2 as the Blowing Agents. Polym. Eng. Sci., Vol. 54, No. 4, pp. 899~913.
DOI
|
21 |
H.-X. Huang, J.-D. Tian, W.-S. Guan, 2014, Microcellular Injection-Compression Molding (MICM): A Novel Technology for Effectively Improving Cellular Structure of Polystyrene Foams, Polym. Eng. Sci., Vol. 54, No. 2, pp. 327~335.
DOI
|
22 |
V. Kumar, N. P. Suh, 1990, A Process for Making Microcellular Thermoplastic Parts, Polym. Eng. Sci., Vol. 30, No. 20, pp. 1323~1329.
DOI
|