1 |
F. Blaha, B. Langenecker, 1955, Tensile Deformation of Zinc Crystal under Ultrasonic Vibration, Naturwiss., Vol. 42, p. 556.
|
2 |
K. Siegert, A. Mock, 1996, Wire Drawing with Ultrasonically Oscillating Dies, J. Mater. Process. Technol., Vol. 60, No. 1, pp. 657-660.
DOI
|
3 |
M. Hayashi, M. Jin, S. Thipprakmas, M. Murakawa, J. C. Hung, Y. C. Tsa, C. H. Hung, 2003, Simulation of Ultrasonic-Vibration Drawing using the Finite Element Method (FEM), J. Mater. Process. Technol., Vol. 140, No. 1, pp. 30-35.
DOI
|
4 |
K. H. Lee, B. M. Kim, 2010, Design and Manufacture of Ultrasonic Vibration Drawing Tool, Trans. Mater. Process., Vol.19, No.6, pp. 363-371.
DOI
|
5 |
A. Siddiq, T. E. Sayed, 2012, Ultrasonic-assisted Manufacturing Processes: Variational Model and Numerical Simulations, Ultrason., Vol. 52, No. 4, pp. 521-529.
DOI
|
6 |
C. Bunget, G. Ngaile, 2011, Influence of Ultrasonic Vibration on Micro-extrusion, Ultrason., Vol. 51, No. 5, pp. 606-616.
DOI
|
7 |
A. Pasierb, A. Wojnar, 1992, An Experimental Investigation of Deep Drawing and Drawing Processes of Thin-walled Products with Utilization of Ultrasonic Vibrations, J. Mater. Process. Technol., Vol. 34, No. 1, pp. 489-494.
DOI
|
8 |
T. Jimma, Y. Kasuga, N. Iwaki, O. Miyazawa, E. Mori, K. Ito, H. Hatano, 1998, An Application of Ultrasonic Vibration to the Deep Drawing Process, J. Mater. Process. Technol., Vol. 80-81, pp. 406-412.
DOI
ScienceOn
|
9 |
Y. Liu, Q. Han, L. Hua, 2012, Finite Element Simulation Analysis of the Ultrasonic Vibration Forging of an Aluminum Cylinder Workpiece, Light Met., pp. 257-264.
|
10 |
R. Hill, 1948, A Theory of the Yielding and Plastic Flow of Anisotropic Metals, Proc. R. Soc. London, Ser. A, Vol. 193, No. 1033, pp. 281-297.
DOI
|