Browse > Article
http://dx.doi.org/10.5228/KSTP.2012.21.6.360

Effects of Forming Depth on the Deformation Behavior of Cup-like Tubes in Tube Spinning Process  

Shin, Y.C. (한국생산기술연구원)
Yoon, D.J. (한국생산기술연구원)
Lim, S.J. (한국생산기술연구원)
Choi, H.J. (한국생산기술연구원)
Publication Information
Transactions of Materials Processing / v.21, no.6, 2012 , pp. 360-365 More about this Journal
Abstract
The aim of this study was to investigate the effects of forming depth on the deformation behavior of cup-like tubes made of AISI1020 steel in tube spinning process. Spinning process was performed on cup-like tubes, which had an inner diameter of 34mm and thicknesses of 7, 8.5 or 11.5mm. The forming depths achieved were 3, 4, and 5.5mm. The complex deformation behaviors occurring during the tube spinning process was explained using the experimental results. Also analyzed were the causes of the material buildup and the bulge defect of inner surface, observed on cross section of tubes. The relationship between tube spinning conditions and the height of bulge defect was examined. The results indicate that bulge defect is increased with a decrease of the forming depth. Moreover, a critical forming depth exists for preventing the generation of the bulge defect in the tube spinning process. The present results will be useful for future decisions of forming depths for successful tube spinning of cup-like tubes.
Keywords
Tube Spinning; Flow Forming; Cup-like Tubes; Forming Depth; Buildup; Bulge Defect;
Citations & Related Records
연도 인용수 순위
  • Reference
1 A. R. Fazeli, M. Ghoreishi 2009, Investigation of Effective Parameters on Surface Roughness in Thermomechanical Tube Spinning Process, Int. J. Mater. Form., Vol. 2, No. 4, pp. 261-270.   DOI
2 C. C. Wong, A. Danno, K. S. Fong, 2010, Deformation Behavior in Flow Forming of Cylindrical Cups using Finite Element Method, Steel Res. Int., Vol. 81, No.9, pp. 1002-1005.
3 Q. X. Xia, S. W. Xie, Y. L. Huo, F. Ruan, 2008, Numerical Simulation and Experimental Research on the Multi-pass Neck-spinning of Non-Axisymmetric Offset Tube, J. Mater. Process. Technol., Vol. 206, No. 1-3, pp. 500-508.   DOI
4 S. Debin, Y. Guoping, Xu. Wenchen, 2009, Deformation History and the Resultant Microstructure and Texture in Backward Tube Spinning of Ti-6Al-2Zr-1Mo-1V, J. Mater. Process. Technol., Vol. 209, No. 17, pp 5713-5719   DOI
5 M. S. Mohebbi, A. Akbarzadeh, 2010, Experimental Study and FEM Analysis of Redundant Strains in Flow Forming of Tubes, J. Mater. Process. Technol., Vol. 210, pp. 389-395.   DOI   ScienceOn
6 D. J. Yoon, Y. C. Shin, S. J. Shin, H. J. Choi, 2010, Proc. Kor. Soc. Tech. Plast. Conf., Kor. Soc. Tech. Plast., Seoul, Korea, pp. 218-221
7 ASM International, 2005, ASM Handbook Metal Working: Bulk Forming, Vol. 14A, ASM International, Ohio.