Browse > Article
http://dx.doi.org/10.5228/KSTP.2012.21.6.348

Influence of Drawing Speed and Blank Holding Force in Rectangular Drawing of Ultra Thin Sheet Metal  

Lee, J.H. (서울과학기술대학교 NID융합기술대학원)
Chung, W.J. (서울과학기술대학교 기계시스템디자인공학과)
Kim, J.H. (서울과학기술대학교 기계시스템디자인공학과)
Publication Information
Transactions of Materials Processing / v.21, no.6, 2012 , pp. 348-353 More about this Journal
Abstract
Micro-drawn parts have received wider acceptance as products become smaller and more precise. The subject of this study was the deformation characteristics of ultra thin sheet metal in micro drawing of a rectangular shaped part. The influence of drawing speed and blank holding force on the product quality was investigated in micro-drawing of ultra thin sheet of beryllium copper (C1720) alloy. The specimen had a diameter of 4.8 mm and a thickness of $50{\mu}m$. Experiments were carried out in which, different blank holding force and drawing speed were considered. The product quality was evaluated by measuring the thickness and hardness along two specified directions, namely, the side and diagonal directions. The distribution of the thickness strain showed severe thinning especially around the punch radius in both directions. In the diagonal direction, thickening occurred in the flange area due to the axi-symmetric drawing mode. The increase of blank holding force and/or drawing speed was found to cause severe thinning around the punch radius. The blank holding force had a greater effect on thinning of the product than the drawing speed.
Keywords
Micro Drawing; Rectangular Drawing; Blankholding Force; Drawing Speed;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Z. Hu, 2011, Realisation and Application of Size Dependent FEM-simulation for Deep Drawing of Rectangular Work Pieces, CIRP J. Manuf. Sci. Technol., Vol. 4, No. 1, pp. 90-95.   DOI
2 B. K. Ha, T. W. Ku, B. S. Kang, 2000, Proc. Kor. Soc. Tech. Plast. Fall Conf., Kor. Soc. Tech. Plast., Seoul, Korea, pp. 101-104.
3 T. W. Ku, B. S. Kang, 2001, An Experimental Approach and Finite Element Analysis on Rectangular Cup Drawing Process of Milli-component Forming, Trans. Mater. Process., Vol. 10, No. 6, pp. 471-477.
4 S. S. Park, K. B. Hwang, J. B. Kim, J. H. Kim, 2010, Investigation of Deep Drawability and Product Qualities of Ultra Thin Beryllium Copper Sheet Metal, Trans. Mater. Process., Vol. 19, No. 3, pp. 179-184.   DOI   ScienceOn
5 K. S. Lee, H. K. Jung, J. B. Kim, J. H. Kim, 2011, Thickness Distribution of Hemispherical Cup in Meso-Scale Deep Drawing Process, Trans. Mater. Process., Vol. 20, No. 1, pp. 36-41.   과학기술학회마을   DOI
6 M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, 2001, Microforming, CIRP Ann., Vol. 50, No. 2, pp. 445-462.   DOI   ScienceOn
7 M. Geiger, U. Engel, F. Vollertsen, R. Kals, A. Messner, 1994, Metal Forming of Micro Parts for Electronics, Prod. Eng., Vol. II, No. 1, pp. 15-18.
8 F. Vollertsen, Z. Hu, H. Schulze Niehoff, C. Theiler, 2004, State of the Art in Micro Forming and Investigations into Micro Deep Drawing, J. Mater. Process. Technol., Vol. 151, No. 1, pp. 70-79.   DOI   ScienceOn
9 H. J. Lee, N. K. Lee, S. M. Lee, G. A. Lee, S. S. Kim, 2006, Development of Micro Metal Forming Manufacturing System, Mater. Sci. Forum., Vol. 505, No. 1, pp. 19-24.   DOI