1 |
H. D. Manesh, K. Taheri, 2003, Bond strength and formability of an aluminum-clad steel sheet, J. Alloys Compd., Vol.361, pp. 138-143.
DOI
ScienceOn
|
2 |
T. Mori and S. Kurimoto, 1996, Press-formability of stainless steel and aluminum clad sheet, J. Mater. Process. Technol., Vol.56, pp. 242-253.
DOI
|
3 |
F. Yoshida, R. Hino, 1997, Forming limit of stainless steel-clad aluminum clad sheet under plane stress condition, J. Mater. Process. Technol., Vol.63, pp. 66-71.
DOI
ScienceOn
|
4 |
M. H. Parsa, K. Yamaguchi, N. Takakura, 2001, Redrawing analysis of aluminum-stainless steel laminated sheet using FEM simulations and experiments, Int. J. Mech. Sci., Vol. 43, No. 10, pp. 2331-2347.
DOI
ScienceOn
|
5 |
T. Oya, N. Tiesler, S. Kawanishi, J. Yanagimoto, T. Koseki, 2010, Experimental and numerical analysis of multilayered steel sheets upon bending, J. Mater. Process. Tech., Vol. 210, No. 14, pp. 1926-1933.
DOI
ScienceOn
|
6 |
B. K. Hwang, K. S. Lee, S. E. Hong, Y. S. Lee, 2011, Temperature and strain rate dependent tension properties of stainless steel-aluminum-magnesium multilayered sheet fabricated by roll bonding, Trans. Mater. Process, Vol. 20, No. 3, pp. 257-264.
DOI
|
7 |
W. J. Kim, H. K. Kim, W. Y. Kim, S. W. Han, 2008, Temperature and strain rate effect incorporated failure criteria for sheet forming of magnesium alloys, Mater. Sci. Eng. A, Vol.488, No. 1-2, pp. 468-474.
DOI
|
8 |
K. Iwanaga, H. Tashiro, H. Okamoto, K. Shimizu, 2004, Improvement of formability from room Temperature to warm temperature in AZ-31 magnesium alloy, J. Mater. Process. Technol., Vol.155, pp. 1313-1316.
DOI
|
9 |
H. Y. Ryu, Y. E. Kim, J. H. Kim, W. J. Chung, 2001, An elasto-plastic analysis on deep drawing of clad sheet metal, Trans. Mater. Process, Vol.10, No. 5, pp. 411-417.
|
10 |
J. H. Jung, Y. S. Lee, Y. N. Kwon, J. H. Lee, 2008, Forming limits diagram of AZ31 alloy sheet with the deformation mode, Trans. Mater. Process, Vol.17, No.7, pp. 473-480.
DOI
|
11 |
F. K. Chen, T. B. Huang, C. K. Chang, 2003, Deep drawing of square cups with magnesium ally AZ31 sheet, Int. J. Mach. Tools Manuf., Vol.43, No. 15, pp. 1553-1559.
DOI
ScienceOn
|
12 |
J. E. Lee, D. H. Bae, W. S. Chung, K. H. Km, J. H. Lee, Y. R. Cho, 2007, Effects of annealing on the mechanical and interface properties of stainless steel/aluminum/cupper clad-metal sheets, J. Mater. Process. Technol., Vol.187-188, pp. 546-549.
DOI
|