1 |
Manual
|
2 |
Manual
|
3 |
H. Y. Kim, H.T. Lim, S. H. Hwang, K. D. Lee, W.S. Lee and D.Y. Kim, 2007, Hot Air Forming Analysis of Aluminum Tube, Proc. Kor. Soc. Tech. Plast. Conf., pp. 116-119.
|
4 |
H. Y. Kim, S. K. Lee, Y. J. Shin, 1996, Finite element Modeling of Folded Airbag and Analysis of Deployment Process, J. Kor. Soc. Auto. Eng., Vol. 4, No. 6, pp. 236-246.
|
5 |
E. Onate, S. Idelsohn, O. C. Zienkiewics, R. L. Tayler, 1996, A Finite Point Method in Computational Mechanics, Int. J. Num. Met. Eng., Vol. 39, pp. 3839-3866.
DOI
|
6 |
E. Onate, S. Idelsohn, 1998, A mesh-free finite point method for advective-diffusive transport and fluid flow problems, Comp. Mec., 21, pp.283-292.
DOI
|
7 |
E. Onate, S. Idelsohn, 2001, A finite point method for elasticity problems, Comp. Struc., 79, pp. 2151-2163.
DOI
|
8 |
M. Alizadeh, S. A. J. Jahromi, 2008, Using Finite Point Method for the Numerical Simulation of Heat Transfer Coupled with Microsegregation during Continuous Casting, Int. J. ISSI, Vol. 5 No. 2, pp. 1-7.
|
9 |
J. Kuhnert, 1999, General Smoothed Particle Hydrodynamics, PhD thesis, Univ. Kaiserslautern, Kaiserslautern.
|
10 |
J. Kuhnert, An Upwind Finite Pointset Method (FPM) for Compressible Euler and Navier-Strokes, ITWM.
|
11 |
A. Trameconto, 2003, Finite Point Method : A Mesh-Free Approach to model Airbag Inflation model , ICD Conference.
|
12 |
E. Gai, H. Zhang, 2005, Finite point method: a new approach to model the inflation of side curtain airbags, Int. J. Crash., Vol. 10, pp. 445-450.
DOI
|
13 |
H. Y. Kim, Y. S. Shin, K. H. Kim, Won Seok Cho, 1998, Stamping Analysis and Die Design of laser Welded Automotive Body, Trans. Mater. Process., Vol. 7, No. 4, pp. 382-392.
|
14 |
H. Zhang, S. Raman, M. Gopal, T. Y. Han, 2004 Evaluation and Comparison of CFD Integrated Airbag Models in LS-DYNA, MADMO and PAM-CRASH, SAE int., ISBN 0-7680-1319-4.
|
15 |
Introduction to Fluid Mechanics, Fox & McDonald
|
16 |
H. J. Kim, B. H. Jeon, H. Y. Km, J. J. Kim, 1993, Finite element analysis liquid bulge forming process of T-shaped pipe by an explicit code, Advanced Technology of Plasticity, pp.545-550.
|
17 |
H. Y. Kim, H.T. Lim, H.J. Kim, W.H. Lee and C. D. Park, 2004, 3-Dimensional Finite Element Analysis of Hemming for Automotive outer Panels by Part Model Assembling Method, Trans. Mater. Process., Vol. 13, No. 2, pp. 115-121.
DOI
|
18 |
T. Belytschko, J. I. Lin, C. S. Tsay, 1984, Explicit algorithms for the nonlinear dynamics of shells, Computer Methods in Applied Mechanics and Engineering, Vol. 42, Issue 2, pp. 225-251.
DOI
|
19 |
D. Y. Lee, B. S. Choi, J. H. Hwang, I. K. Baek, K. Y. Choi, 2009, Springback Control of an Automotive Surround Molding part Using Automatic Die Compensation Module, Trans. Mater. Process., Vol. 18, No. 3, pp. 210-216.
DOI
|
20 |
S. Y. Jung, S. J. Hwang, W. G. Park, C. Kim, 2008, Development of an Automated System for Predicting Shape and Volume of Air Pocket on the Draw Die, J. Kor. Soc. Prec. Eng., Vol. 25, No. 1, pp. 72-78.
|
21 |
H. Y. Kim, H.T. Lim, 2003, Die Design for Tube Hydroforming Process Considering Preforming Effect, Trans. Mater. Process., Vol. 12, No. 5, pp. 433-439.
DOI
|
22 |
S. J. Hwang, W. G. Park, C. Kim, S. W. Oh, N. Y. Cho, 2006, Flow Analysis of the Air Pocket in draw Die, Proc. Natl. Cong. Fluids Eng., pp. 345-348.
|