Browse > Article
http://dx.doi.org/10.5228/KSTP.2011.20.4.316

Experimental and FE Analyses of Hot Curvature-Forming for Aluminum Thick Plate Using Grid-Typed Hybrid Die  

Lee, I.K. (부산대학교 하이브리드 소재 솔루션 협동 과정)
Lee, J.M. (부산대학교 PNU-IFAM JRC)
Son, Y.K. (부산대학교 정밀가공시스템)
Lee, C.J. (부산대학교 정밀가공시스템)
Kim, B.M. (부산대 기계공학부)
Publication Information
Transactions of Materials Processing / v.20, no.4, 2011 , pp. 316-323 More about this Journal
Abstract
The hot curvature-forming of large aluminum thick plate using a grid-typed hybrid die is a process for the production of a spherical LNG tank. Many variables such as the initial die surface quality, grid size, grid thickness, size of blank plate and cooling line design, control the success of the process. In addition, the plate used in this process is generally larger than $10{\times}10m$ in size. Thus, it is very difficult to predict the surface characteristics of the plate during forming and to measure the different parameters due to the high cost of the experiments. In order to optimize the process design for the grid-type die, the development of an analytical method to predict the surface characteristics of the final product in hot curvature-forming is needed. This paper described the development of the method and procedures for FE simulations of the hot curvature-forming process, including hot forming, air flow, cooling, and thermal deformation analyses. An experiment for a small scale model of the process was conducted to check the validity of the numerical method. The results showed that the curvature of the plate in the analysis agrees well with that of the experiment within 0.037 and 0.016% tolerance margins for its side and corner, respectively.
Keywords
Grid-typed Hybrid Die; LNG-Tank; Hot Curvature-forming; Finite Element Analysis; Aluminum Thick Plate; Compressed Air Cooling;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. R. Davis, 1993, Aluminum and aluminum Alloys, 3rd ed., The materials Information Society, USA, pp. 675-676.
2 J. X. Xie, et al., 1993, Theoretical Analysis on Fabrication Process of Pipe by Multi-Billet Extrusion, Journal of the JSPT, Vol. 34. pp. 823-829.
3 Y. V. R. K. Prasad, S. Sasidhara, 1997, Hot Working Guide, 1st ed., The materials Information Society, USA, pp.101-103.
4 AISI H13 Hot Work Tool Steel, www.matweb.com.
5 ANSYS CFX Turbulence Model Manual, Ver.12.0.
6 J, W. Kwon, et al., 2005, A Study of Interface Heat Transfer Coefficient Between Die and Workpiece for Hot Forging, Trans. Mater. Process, Vol. 14, No. 5, pp. 460-465.   과학기술학회마을   DOI
7 Jari Anttila, et al., 1996, Spherical LNG-tank and a production method for a such tank, United state patent, No. 5,529,239.
8 Frank R. Baysinger, 1980, Liquefied natural gas tank construction, United state patent, No. 4,182, 235.
9 Utpal Borah, et al., 2008, Estimation of springback in double-curvature forming of plates: experimental evaluation and process modeling, Int. J. Mech. Sci., Vol. 50, pp. 704-718.   DOI
10 P. Xue, et al., 2001, An energy approach for predicting springback of metal sheets after doublecurvature forming Part II: Unequal doublecurvature forming, Int. J. Mech. Sci. Vol. 43, pp. 1915-1924.   DOI
11 DEFORM-3D User's Manual, Ver.10.0.
12 K. C. Ho, et al., 2004, Modelling of springback in creep forming thick aluminum sheets, Int. J. Plast., Vol. 20, pp. 733-751.   DOI
13 K. Oliphant, et al., 1988, An experimental comparison of liquid jet array and spray impingement cooling in the non-boiling regime, Exp. Therm. Fluid Sci., Vol. 18, pp. 1-10.