Browse > Article
http://dx.doi.org/10.5228/KSTP.2011.20.4.284

A Roll-Bite Profile Map Approach for the Prediction of Front End Bending in Plate Rolling  

Byon, S.M. (동아대학교 기계공학과)
Lee, J.H. (동아대학교 기계공학과)
Kim, S.R. (동아대학교 기계공학과)
Publication Information
Transactions of Materials Processing / v.20, no.4, 2011 , pp. 284-290 More about this Journal
Abstract
The front end bending(FEB) behavior of material that usually occurs in plate rolling is investigated. In this paper, a rollbite profile map approach that systematically predicts the FEB slope is presented. It is based on the concurrent use of shape factors and reduction ratios to ensure an accurate value of the FEB and its slope. In order to obtain the unit roll-bite profile map, the FEB slope model was decomposed into a temperature deviation component and a roll-velocity deviation component. By mapping the results of a series of finite element analyses to the unit functions of the roll-bite profile map, it was possible to obtain a realistic prediction of the FEB slope applicable to an actual plate rolling process. Thereby, the usefulness of the present approach is clearly demonstrated.
Keywords
Roll-Bite Profile Map; Front End Bending; Plate Rolling; Shape Factor; Reduction Ratio;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 S. A. A. A. Mousavi, S. M. Ebrahimi, R. Madoliat, 2007, Three dimensional numerical analyses of asymmetric rolling, J. Mater. Process. Technol., Vol. 187-188, pp. 725-729.
2 M. Pietrzyk, J. C. Lenard, 1991, Thermal-Mechanical Modelling of the Flat Rolling Process, Springer- Verlag, Berlin.
3 M. Yoshii, et al., 1991, Analysis of warping phenomenon in plate rolling, ISIJ Int., Vol. 31, pp. 973-978.   DOI
4 B. H. Park, S. M. Hwang, 1997, Analysis of front end bending in plate rolling by the finite element method, J. Manuf. Sci. Eng., Vol. 119, pp. 314-323.   DOI
5 J. S. Lu, et al., 2000, Analysis of the bending of the rolling material in asymmetrical sheet rolling, Int. J. Mech. Sci., Vol. 42, pp. 49-61.   DOI
6 A. Nilsson, 2001, Front-end bending in plate rolling, Scan. J. Metall., Vol. 30, pp. 337-344.   DOI
7 M. Philipp et al., 2007, Front end bending in plate rolling influenced by circumferential speed mismatch and geometry, J. Mater. Process. Technol., Vol. 184, pp. 224-232.   DOI