Browse > Article
http://dx.doi.org/10.5228/KSTP.2011.20.3.222

State of Art for Biaxial Tensile Test Systems  

Park, J.G. (경북대학교 대학원)
Ahn, D.C. (POSCO 기술연구소)
Nam, J.B. (POSCO 기술연구소)
Kim, Y.S. (경북대학교)
Publication Information
Transactions of Materials Processing / v.20, no.3, 2011 , pp. 222-228 More about this Journal
Abstract
This paper is a review of biaxial tensile test equipments and specimens. The stresses acting on a component in service are multiaxial in nature. Therefore, it is necessary to consider the mechanical properties of sheet materials not only under uniaxial but also under these multiaxial stress states. Biaxial testing of metal in industry becomes an important investigation tool for the evaluation of mechanical properties of sheet metals. In this paper, several types of biaxial tensile tests were reviewed, and their advantages and limitations were discussed.
Keywords
Biaxial Tensile Test; Yield Loci; Material Properties; Cruciform Specimen;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. Park, Y. Kim, B. You, T. Kuwabara, 2005, Plastic deformation characteristic of AZ31 magnesium alloy sheets, Trans. Mater. Process., Vol. 14, pp 520-526.   DOI
2 J. Park, N. Park, Y. Kim, 2010, Plastic deformation characteristics and evaluation of press formability for Ti-6Al-4V sheet at warm temperature, Mat. Sci. For., Vol. 654-656, pp. 875-878.
3 O. Cazucu, B. Plunkett, F. Barlat, 2006, Orthotropic yield criterion for hexagonal closed packed metals, Int. J. Plastic., Vol. 22, pp. 1171-1194.   DOI   ScienceOn
4 M. Ishiki, T. Kuwabara, Y. Hayashida, 2009, Analysis of differential work hardening behavior of pure titanium sheet using spline function, Int. J. Mater. Form., Vol. 2, pp. 69-72.
5 I. Zidane, D. Guines, L. Leontoing, E. Ragneau, 2010, Development of an in-plane biaxial test for forming limit curve(FLC) characterization of metallic sheets, Meas. Sci. Technol., Vol. 21, pp. 1-11.
6 T. Kuwabara, S. Ikeda, K. Kuroda, 1998, Measurement and analysis of differential work hardening in cold rolled steel sheet under biaxial tension, J. Mater. Proc. Technol. Vol. 80-81, pp. 517-523.   DOI
7 M. Geiger, W. Hubnatter, M. Merklein, 2005, Specimen for a novel concept of the biaxial tension test, Mater. Process. Technol., Vol. 167, pp. 177-183.   DOI
8 J. S. Welsh, D. F. Adams, 2002, An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens, Composites: Part A 33 (6), pp. 829-839.   DOI
9 G. Ferron, A. Makinde, 1988, Design and development of a biaxial strength testing device, J. Test. Eval., Vol. 16, pp. 253-256.   DOI
10 Fraunhofer, 2005. Dynamic material testing(http://www.emi.fraunhofer.de).
11 K. J. Pascoe, J. W. R. de Villiers, 1967, Low-Cycle Fatigue of Steels Under Biaxial Straining, J. Strain Anal., Vol. 2, pp. 117-126.   DOI
12 L. H. Wilson, D. Z. White, 1971, Cruciform specimens for Biaxial Fatigue Tests: An Investigation Using Finite Element Analysis and Photoelastic-Coating Techniques, J. Strain Anal., Vol. 6, pp. 27-37.   DOI
13 Y. Ohtake, S. Rokugawa, H. Masumoto, 1999, Geometry determination of cruciform type specimen and biaxial tensile test of C/C composites, Key Eng. Mater., Vol. 3, pp. 151-154.
14 F. Abu-Farha, L.G Hector, Jr., M. Khraisheh, 2001, Cruciform-Shaped Specimens for Elevated Temperature Biaxial Testing of Lightweight Materials, JOM, Vol. 61, pp. 48-56.
15 J. Gozzi, 2004, Plastic behavior of steel, Ph. D. Thesis of Lulea Univ. of Tech.
16 A. Makinde, L. Thibodeau, K. W. Neale, 1992, Development of an apparatus for biaxial testing for cruciform specimens, Exp. Mech., Vol. 32, pp. 138-144.   DOI
17 W. Klaus, J. Gerlach, 1998, Biaxial Experimental Approach to Characterize Formability of Steel Sheet Metals, Soc. Auto. Eng., pp. 69-75.
18 H. Shin, J. Park, C. Park, Y. Kim, 2009, Study on the yield locus of aluminum alloy sheet using biaxial cruciform specimens, Trans. Mater. Process., Vol. 18, pp 416-421.   과학기술학회마을   DOI
19 J. Park, J. Kim, N. Park, Y. Kim, 2010, Study of forming limit for rotational incremental sheet forming of magnesium alloy sheet, Metal. and Mater. Trans. A, Vol. 41A, pp. 97-105.
20 S. B. Lin, J. L. Ding, 1995, Experimental study of the plastic yielding of rolled sheet metals with the cruciform plate specimen, Int. J. Plasticity, Vol. 11, pp. 583-604.   DOI