Design of Half Blanking Process for Reducing Rollover and Stress Acting on Tools in Forming of Lower Tooth |
Jang, M.J.
(부산대 정밀가공시스템)
Choi, H.S. (부산대 정밀가공시스템) Lee, S.H. (부산대 정밀가공시스템) Kim, D.S. ((주)다스 금형팀) Lee, S.G. ((주)다스 금형팀) Ko, D.C. (부산대 부품소재산학협력연구소) Kim, B.M. (부산대 기계공학부) |
1 | C. S. Woo, J. S. Koo, H. J. Cho, H. S. Kim, J. S. Jeong, 2001, Structual Analysis and Evaluation Technologies of Automotive Seat Frames, Process. Kor. Soc. Mech. Eng. (A), pp. 806-811. 과학기술학회마을 |
2 | J. Y. Kim, J. H. Kim, W. J. Chang, 2005, Influence of Die Design Variables on the Sheared Surface in Shearing Process of Sandwich Sheet Metal, J. Kor. Soc. Technol. Plast., Vol. 14, No. 1, pp. 37-42. 과학기술학회마을 DOI |
3 | T. S. Kwak, Y. J. Kim, M. K. Seo, W. B. Bae, 2003, The effect of V-ring indenter on the sheared surface in the fine-blanking process of pawl, J. Mater. Process. Technol., Vol. 143-144, pp. 656-661. DOI |
4 | T. S. Kwak, Y. J. Kim, W. B. Bae, 2002, Fine element analysis on the effect of die clearance on shear planes in fine blanking, J. Mater. Process. Technol., Vol. 130-131, pp. 462-468. DOI |
5 | Y. J. Kim, T. S. Kwak, W, B, Bae, 2000, Finite element analysis on effect of die clearance on shear planes in fine blanking, J. Kor. Soc. Technol. Plast., Vol. 9, No. 2, pp. 40-44. |
6 | J. D. Kim, J. J. Kang, H. K. Kim, S. K. Hong, B. J. Kim, 2005, A progressive fine blanking process design for forming of carrier plate, J. Kor. Soc. Technol. Plast., Vol. 14, No. 3, pp. 207-214. 과학기술학회마을 DOI |
7 | T. Nakagawa, K. Suzuki, M. Kinoshita, 1971, Profile effects on the sheared surface qualities in fine blanking, J. of Jpn. Soc. Technol. Plast., Vol. 12, No. 129, pp. 742-751. |
8 | B. M. Kim, H. S. Choi, M. J. Jang, J. H. Bae, S. B. Lee, D. C. Ko, 2008, Development of High Precision Plate Holder in Automotive Seat Recliner by Mechanical Press(I), J. Kor. Soc. Precis. Eng., Vol. 25, No. 7, pp. 55-63. 과학기술학회마을 |
9 | K. S. Lee, J. Y. Jung, J. H. Kim, 2010, Influence of working variables in simplified gear shaving process, J. Kor. Soc. Technol. Plast., Vol. 19, No. 5, pp. 290-295. 과학기술학회마을 DOI |
10 | B. V. Hien, S. M. Kim, H. Y. Kim, T. W. Ku, B. S. Kang, 2007, Numerical analysis of parameters affecting formability in micro half blanking using thin sheet metal, Proc. Kor. Soc. Precis. Eng., pp. 15-16. 과학기술학회마을 |
11 | P. D. Harvey, 1985, Engineering Properties of Steel, 2nd ed., American Society for Metals, Ohio. pp. 431-468. |
12 | K. Kondo, K. Maeda, A. Meada, K. Hirota, 1994, Development of a simple precision shearing process for thick plates, J. of Jpn. Soc. Technol. Plast., Vol. 35, No. 396, pp. 67-72. |
13 | B. M. Kim, H. S. Choi, M. J. Jang, J. H. Bae, S. B. Lee, D. C. Ko, 2008, Development of High Precision Plate Holder in Automotive Seat Recliner by Mechanical Press(II), J. Kor. Soc. Precis. Eng., Vol. 25, No. 7, pp. 64-71. 과학기술학회마을 |