Browse > Article
http://dx.doi.org/10.5228/KSTP.2011.20.2.99

Contact Pressure Effect on Frictional Behavior of Sheet Steel for Automotive Stamping  

Han, S.S. (금오공과대학교 기계공학과)
Publication Information
Transactions of Materials Processing / v.20, no.2, 2011 , pp. 99-103 More about this Journal
Abstract
Many parameters influence the frictional behavior of steel sheet during stamping. The contact pressure between a die and a sheet during stamping is one of them. Thus, this parameter is investigated for high strength steel (HSS) sheets, which are widely used for auto body panels due to their potential for weight reduction. Since HSS extend the limits of contact pressure for mild steel, the effect of this parameter on friction cannot be ignored. To investigate the influence of contact pressure on the frictional behavior of steel sheets, a flat type of friction test was conducted on three different steel sheets under various contact pressures. For bare steel sheets, the curve representing the relationship between contact pressure and friction coefficient exhibits a U shape. Coated steel sheets show a similar tendency except at low contact pressure. For these materials, when the contact pressure is very low, the friction coefficient slightly increases with pressure before it starts to decrease. The test results show that the effect of contact pressure on frictional behavior of steel sheet is not negligible even for contact pressures that are lower than the strength of HSS sheet.
Keywords
High Strength Steel; Flat Type Friction Test; Coated Steel Sheet; Bare Steel Sheet; Oil Pocket;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 W. T. Kim, D. H. Lee, M. S. Suh, Y. H. Moon, 2005, Analysis on parameters affecting the friction coefficient in drawbead forming of sheet metal, Transactions of materials processing, Vol.14, No.8, pp. 668-674.   과학기술학회마을   DOI
2 J. M. Lanzona, M. J. Cardew-Hall, P. D. Hodgson, 1998, Characterising frictional behaviour in sheet metal forming, JMPT, Vol. 80-81, pp. 251-256.   DOI   ScienceOn
3 J. W. Shim, Y. T. Keum, 2007, Effects of Blank Holding Force on the Friction Behavior in Sheet Metal Forming, Transactions of Materials Processing, Vol.16, No.5, pp. 381-385.   과학기술학회마을   DOI
4 H. Kim, S. Han, Q. Yanc, T. Altan, 2008, Evaluation of tool materials, coatings and lubricants in forming galvanized advanced high strength steels (AHSS), CIRP Annals - Manufacturing Technology, Vol.57, pp. 299-304.   DOI   ScienceOn
5 S. S. Han, K. C. Park, 2009, Effect of Surface Roughness on Frictional Behavior of Sheet Steel for Automotive, Transactions of Materials Processing, Vol.17, No.5, pp. 401-406.   과학기술학회마을   DOI
6 B. H. Lee, Y. T. Keum, 2002, Friction model for sheet metal forming analysis (Part1: Experiment), Transactions of Materials Processing, Vol.11, No.4, pp. 349-354.   과학기술학회마을   DOI
7 A. Azushima, M. Sakuramoto, 2006, Effects of Plastic Strain on Surface Roughness and Coefficient of Friction in Tension-bending Test, Annals of the CIRP, Vol. 55.
8 P. Skarpelos, J. W. Morris, Jr., 1997, The effect of surface morphology on friction during forming of electrogalvanized sheet steel, WEAR, Vol. 212, pp. 165-172.   DOI