Browse > Article
http://dx.doi.org/10.5228/KSTP.2011.20.1.42

Prediction of Wrinkling in Micro R2R Forming and Its Improvement  

Min, B.W. (서울과학기술대학교 NID 융합대학원)
Seo, W.S. (서울과학기술대학교 NID 융합대학원)
Kim, J.B. (서울과학기술대학교 자동차공학과)
Lee, H.J. (한국생산기술연구원 융합생산기술연구부)
Lee, S.H. (서울과학기술대학교 자동차공학과)
Kim, J.H. (서울과학기술대학교 제품설계금형공학과)
Publication Information
Transactions of Materials Processing / v.20, no.1, 2011 , pp. 42-47 More about this Journal
Abstract
Recently, with the merits of simplicity, ease of mass production and cost effectiveness, a roll-to-roll (R2R) forming process is tried to be employed in the manufacturing of the circuit board, barrier ribs and other electronic device. In this study, the roll-to-roll process for the forming of micro-pattern in electronic device panel is designed and analyzed. In the preliminary experiments, two major defects, i.e., crack near the dimple wall and wrinkling on outside region of dimple, are found. The study on the crack prevention is carried out in previous works by authors. In this study, the cause of wrinkling and modification of tooling to prevent the wrinkling is studied. The main cause of wrinkling is considered to be the uneven material flow along the rolling direction. To reduce or to retard the wrinkling initiation, a dummy shape on outside the pattern is introduced. From the finite element analysis results, it is shown that the dummy shape can reduce the uneven material flow significantly. Finally the effect of dimensions of the dummy shape on material flow is investigated and the optimum dimensions are found.
Keywords
Roll-to-roll Forming; Wrinkling; Crack;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 J. Y. Kim, S. M. Joo, H. K. Kim, 2008, Super plastic Micro-extrusion for Micro-gears, Trans. of Kor. Soc. Machine Tool Eng., Vol. 17, No. 4, pp. 1-7.
2 M. Geiger, M. Kleiner, R. Eckstein, N. Tiesler, U. Engel, 2001, Micro forming, Annals of the CIRP, Vol. 50, No. 2, pp. 445-459.   DOI
3 B. Y. Joo, S. I. Oh, 2001, Development of Micro Punching System, Annals of the CIRP, Vol. 50, No. 1, pp. 191-194.   DOI
4 L. Peng, X. Lai, D. Liu, P. Hu, J. Ni, 2008, Flow channel shape optimum design for hydro formed metal bipolar plate in PEM fule cell, J. Power Sources, Vol. 178 , No. 1, pp. 223-230.   DOI
5 J. J. Park, H. S. Hwang, Y.S. Kim, H. C. Jeon, 2002, Design of groove and preform for roll forming of PDP barrier ribs, Trans. of Kor. Soc. Mech. Eng., Vol. 26, No. 10, pp. 2082-2088.   과학기술학회마을   DOI
6 H. Lke, M. Plancak, 1998, Coining Process as a Means of Controlling Surface Micro geometry, J. Mater. Process. Technol., Vol. 80-81, pp. 101-107.   DOI
7 S. H. Cha, M. S. Shin, H. J. Lee, J. B. Kim, 2010, Design of roll-to-roll forming process of micro pattern on the thin sheet metal by finite element analysis, Trans. Mater. Process., Vol. 19, No. 3, pp. 167-172.   과학기술학회마을   DOI
8 D. Li, A. Ghosh, 2003, Tensile deformation behavior of aluminum alloys at warm forming temperatures, Mater. Sci. Eng. Vol. A352, pp. 279-289.