Browse > Article
http://dx.doi.org/10.5228/KSTP.2010.19.8.460

A Study on Welding Strength of Extru-Riveting Process of Aluminum Plates  

Lee, J.H. (부경대학교 대학원)
Kim, T.H. (부경대학교 대학원)
Lee, M.Y. ((주)성우하이텍 기술연구소)
Jin, I.T. (부경대학교 기계공학과)
Publication Information
Transactions of Materials Processing / v.19, no.8, 2010 , pp. 460-467 More about this Journal
Abstract
It was studied that two plates of aluminum can be welded by extru-riveting experiments with extru-rivet welding dies, and that the welding strength and metal flow on the welding section were analyzed by computer simulation according to the welding variable such as the diameter of extrusion insert dies. It was known by computer simulation that welding strength on the welding section of plates could be influenced by the diameter of extrusion insert dies. And it was known by experiments that two plates of aluminum can be welded on a spot point on aluminum plate by extru-rivet welding process, and that welding strength is higher and higher if the diameter of extrusion insert die is smaller and smaller, and that welding strength is the highest when diameter of extrusion insert dies is ${\emptyset}4.2$mm in the case that the diameter of rivet is 5 mm, when aluminum 5052 two plates with 1.5 mm thickness and one plate with 3mm thickness for rivet plate are used as welding material.
Keywords
Extru-Riveting; Pressure Welding; Spot Welding; Friction Stir Spot Welding; Welding Dies; Aluminum Plate;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 D. B. Yum, J. B. Ko, B. K. Choi, S. G. Lee, A. K. Kim, 2002, Evaluation of Resistance Spot Welding Weldability of Aluminum Alloy 5000 Series, Trans. Kor. Soc. Mach. Tool Eng., Vol. 11, No. 3, pp. 8-13.   과학기술학회마을
2 Wayne Cai, P. C. Wang, Wu Yang, 2005, Assembly Dimensional Prediction for Self-Piercing Riveted Aluminum Panels, Int. J. Mach. Tools Manuf., Vol. 45, No. 6, pp. 695-704.   DOI   ScienceOn
3 Mitsuo Fujimoto, Shinji Koga, Natsumi Abe, S. Yutaka Sato, Hiroyuki Kokawa, 2009, Analysis of Plastic Flow of The Al Alloy Joint Produced by Friction Stir Spot Welding, Weld. Int., Vol. 23, No. 8, pp. 589-596.   DOI   ScienceOn
4 J. Y. Kim, C. J. Lee, S. K. Lee, D. C. Ko, B. M. Kim, 2009, Effect of Shape Parameters of Tool on Improvement of Joining Strength in Clinching, Trans. Mater. Process., Vol. 18, No. 5, pp. 392-400.   과학기술학회마을   DOI
5 I. T. Jin, 2007, Extruvet Bonding Apparatus and Method of Metal Plates by Plasticity Flow, Kor. Patent., 10-0743857.
6 K. K. Lee, 2009, A Study on the Extru-welding Process of Aluminum Rods and Plates, Department of Mechanical Engineering, Ph. D. Thesis, The graduate School, Pukyong National University.
7 K. K. Lee, I. T. Jin, 2008, A Study on Hot Extruwelding Dies of Aluminum Rods, Proc. Kor. Soc. Tech. Plast. Conf. June 24, pp. 27-30.
8 K. K. Lee, I. T. Jin, 2008, A Study of Extru-Pressure Welding Strength of Aluminum Rods, Trans. Mater. Process., Vol. 17, No. 4, pp. 284-291.   과학기술학회마을   DOI