1 |
M. G. Cockroft and D. J. Latham, 1968, Ductility and the workability of metals. J. Inst. Met., Vol. 96, pp. 33-39.
|
2 |
J. G. Park, J. H. Kim, N. K. Park, and Y. S. Kim, 2009, Plastic deformation characteristic of titanium alloy sheet (Ti-6Al-4V) at warm temperature, 2009 Spring Conf. Trans. Mat. Processing, pp. 152-157.
과학기술학회마을
|
3 |
R. W. Logan and W. F. Hosford, 1980, Upperbound anisotropic yield locus calculations assuming <111> pencil glide, Int. J. Mech. Sci., Vol. 22, pp. 419-430.
DOI
|
4 |
M. Vanderhasten, L. Rabet, and B. Verlinden, 2008, Ti-6Al-4V: deformation map and modelisation of tensile behavior, Mater. Design, Vol. 29, pp.1090-1098.
DOI
|
5 |
A. S. Khan, R. Kazmi, and B. Farrokh, 2007, Multiaxial and non-proporional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures, Int. J. Plast., Vol. 23, pp. 931-950.
DOI
|
6 |
S. B. Leen, M. A. Krohn, and T. H. Hyde, 2008, Failure prediction for titanium alloys using a superplastic forming limit diagram approach, Mat-wiss. U. werkstofftech, Vol. 38, pp. 327-331.
|
7 |
R. Hill, 1983, The mathematical theory of plasticity, Oxford University Press, New York.
|
8 |
Z. Marciniak and K. Kuczynski, 1967, Limit strains in the process of stretch-forming sheet metal, Int. J. Mech. Sci., Vol. 9, pp. 609-612.
DOI
|
9 |
H. Y. Kim, S. C. Choi, H.S. Lee, H. J. Kim, and K. T. Lee, 2007, Experiment for forming limit diagram and springback characteristics of AZ31B magnesium alloy sheet at elevated temperature, Trans. Mat. Processing, Vol. 16, pp. 364-369.
과학기술학회마을
DOI
|
10 |
H. S. Son and Y. S. Kim, 2003, Prediction of forming limits for anisotropic sheets containing prolate ellipsoidal voids, Int. J. Mech. Sci., Vol. 45, pp. 1625-1643.
DOI
ScienceOn
|
11 |
S. S. Hecker, 1972, A simple forming limit curve technique and results on aluminum alloys, Proc. 7th Biennial Congress Int. Deep Drawing Research Group, Amsterdam, pp. 51-58
|
12 |
A. S. Korhonen and T. Manninen, 2008, Forming and fracture limits of austenitic stainless steel sheets, Mater. Sci. Eng. A, Vol. 488, pp. 157-166
DOI
|
13 |
L. Zhang, Y. J. Yin, Y. Q. Chen, and M.-D. Xue, 2003, Damage and forming limit analysis in porous ductile metals at room or elevated temperature, Mater. Sci. Tech., Vol. 19, pp. 1355-1360.
DOI
|
14 |
M. J. Donachie, Jr., 1988, Titanium: A Technical Guide, ASM Int., Metals Park, OH.
|
15 |
G. K. Turnbull, 1982, Titanium and Titanium alloys-Source book, ASM International, Metal Park, OH, pp. 265-269.
|
16 |
P. G. Partidge, 1967, The Crystallography and Deformation mode of HCP metals, Int. Mat. Rev., Vol. 12, pp. 169-164.
DOI
|
17 |
D. G. Lee, Y. H. Lee, C. S. Lee, and S. H. Lee, 2004, Effects of volume fraction of tempered martensite on dynamic deformation properties of Ti-6Al-4V alloy having bimodal microsture, J. Korean Inst. Met. Mater., Vol. 42, pp. 455-463.
|
18 |
G. Lutjering, 1998, Influence of processing on microstructure and mechanical properties of titanium alloys, Mater. Sci. Eng. A, Vol. 243, pp. 32-45.
DOI
|
19 |
R. R. Boyer, G. E. Welsch, and E. W. Collings, 1994, Materials Properties Handbook, ASM International, Metal Park, OH. P. 488.
|