Browse > Article
http://dx.doi.org/10.5228/KSPP.2009.18.8.601

A Study on the Forming Process of Stair Type Side Sill for Automobile using DP780  

Suh, C.H. (대구기계부품연구원)
Shin, H.D. (대구기계부품연구원)
Jung, Y.C. (대구기계부품연구원)
Park, C.D. (대구기계부품연구원)
Lim, Y.H. (신화)
Kim, Y.S. (경북대학교 기계공학부)
Publication Information
Transactions of Materials Processing / v.18, no.8, 2009 , pp. 601-606 More about this Journal
Abstract
High strength steels are widely used for lightweight automobile parts and the control of springback is very important in sheet metal forming. The object of this study is to develop the forming process for stair type side sill made of high strength steel, DP780. Stair type side sill with local formed area and geometry change area can improve stiffness and design freedom but there are few studies for forming process. The forming technology considered in this paper is form type process, which has many advantages for forming of high strength steel compared with draw type process. Finite element analysis is carried out to predict formability and springback. It is shown that angle calibration of die is essential for reducing springback, and local forming involving bead is effective to control springback also. The effectiveness of local forming and angle calibration is verified by experimental.
Keywords
High Strength Steel; Springback; Side Sill; Local Forming; Finite Element Analysis;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 M. S. Chae, Y. H. Lim, Y. S. Suh, C. D. Park, Y. S. Kim, 2008, A new manufacturing process for the ring plate of automotive fuel tank, Trans. Mater. Process, Vol. 17, No. 5, pp. 350-355   과학기술학회마을   DOI   ScienceOn
2 M. G. Lee, D. Kim, K. Chung, C. Kim, Michael L. Wenner, 2004, Spring-back evaluation of automotive sheets based on combined isotropic-kinematic hardenign rule, Trans. Mater. Process., Vol. 13, No. 1, pp. 15-20   DOI   ScienceOn
3 C. H. Cha, S. K. Lee, D. C. Ko, B. M. Kim, 2009, A study on the forming of automotive front side member part with ultra high strength steel of DP980, Trans. Mater. Process., Vol. 18, No. 1, pp. 39-44   과학기술학회마을   DOI   ScienceOn
4 M. Banu, M. Takamura, T. Hama, O. Naidim, C. Teodosiu, A. Makinouch, 2006, Simulation of springback and wrinkling in stamping of a dual phase steel rail-shaped part, J. Mater. Process. Technol., Vol. 173, pp. 178-184   DOI   ScienceOn
5 I. C. Park, Y. J. Kim, J. M. Lee, Y. C. Park, 2006, Optimization of design planning by using the spring back simulation of auto panels, Trans. Mater. Process., Vol. 15, No. 2, pp. 164-171   DOI   ScienceOn
6 S. A. Asgari, M. Pereire, B. F. Rolfe, M. Dingle, P. D. Hodgson, 2008, Statistical analysis of finite element modeling in sheet metal forming and springback analysis, J. Mater. Process. Technol., Vol. 203, pp. 129-136   DOI   ScienceOn
7 P. Chen, M. Koc, 2007, Simulation of springback variation in forming of advanced high strength steels, J. Mater. Process. Technol., Vol. 190, pp. 189-198   DOI   ScienceOn
8 Y. H. Kim, T. W. Kim, Y. S. Lee, J. H. Lee, 2004, A study on the springback of high strength TRIP steel, Trans. Mater. Process, Vol. 13, No. 5, pp. 409-414   DOI   ScienceOn
9 D. Y. Yang, S. W. Lee, J. W. Yoon, D. J. Yoo, 1999, Springback analyses in sheet metal stamping processes and industrial applications, Trans. Mater. Process., Vol. 8, No. 1, pp. 22-28