Study on the Yield Locus of Aluminum Alloy Sheet Using Biaxial Cruciform Specimens |
Shin, H.D.
(대구기계부품연구원 차세대금형기술혁신센터)
Park, J.G. (경북대학교 기계공학부) Park, C.D. (대구기계부품연구원 차세대금형기술혁신센터) Kim, Y.S. (경북대학교 기계공학부) |
1 | D. Y. Kim, W. N. Lee, J. H. Kim, C. M. Kim, K. S. Chung, 2009, Experimental Formability Investigation for FSW Sheets with Respect to Base Material's Directional Combination, Trans. Mater. Process., Vol. 18, No. 1, pp. 73-79 DOI ScienceOn |
2 | D. Li, A. Ghosh, 2003, Tensile deformation behavior of aluminum alloys at warm forming temperatures, Mat. Sci. Eng., Vol. 352A, pp. 279-286 DOI ScienceOn |
3 | Y. S. Kim, C. Kim, S. Y. Lee, S. Y. Won, S. M. Hwang, 2003, Forming limits for anisotropic sheet metals, JSME Int. J., Vol. 46A, No. 4, pp. 627-634 |
4 | R. Hill, 1950, The Mathematical Theory of Plasticity, Clarendon Press, Oxford |
5 | Y. S. Kim, 2009, Theory of Engineering Plasticity, Sigma Press |
6 | R. Hill, 1990, Constitutive Modeling of Orthotropic Plasticity in Sheet Metals, J. Mech. Phys. Solids, Vol. 38, No. 3, pp. 405-417 DOI ScienceOn |
7 | T. Kuwabara et al. 1998, Measurement and analysis of differential work hardening in cold- rolled steel sheet under biaxial tension, J. Mater. Process. Tech, Vol. 80-81, pp. 517-523 DOI ScienceOn |
8 | J. G. Park, Y. S. Kim, T. Kuwabara, B. S. You, 2005, Plastic Deformation Characteristic of AZ31 Magnesium Alloy Sheet, Trans. Mater. Process., Vol. 14, pp. 520-526 DOI ScienceOn |
9 | K. B. Lee, S. Y. Lee, Y. T. Keum, 1997, Sectional Forming Analysis of Stamping Processes for Aluminum Alloy Sheet Metals, J. Kor. Soc. Technol. Plast., Vol. 6, No. 4 |
10 | PAM-STAMP 2G 2008, User's Manual |
11 | K. S. Kim, K. D. Hur, 2009, Characteristics of Bending Deformation in Aluminum Rectangular Bar by Press Die, Trans. Mater. Process., Vol. 18, No. 1, pp. 13-19 DOI ScienceOn |
12 | Y. S. Kim, State of art report on aluminum sheet forming, Kor. Soc. Automotive Eng., Vol. 14, No. 1, pp. 3-12 |