Browse > Article
http://dx.doi.org/10.5228/KSPP.2009.18.2.116

Texture and Formability Development of Non-lubrication Rolled Al Alloy Sheet  

Akramov, Saidmurod (금오공과대학교 신소재시스템공학부)
Kim, In-Soo (금오공과대학교 신소재시스템공학부)
Publication Information
Transactions of Materials Processing / v.18, no.2, 2009 , pp. 116-121 More about this Journal
Abstract
Formability and other mechanical properties of sheet metals are strongly dependent on the texture. It was studied to improve the formability of the Al alloy(AA3003) sheets which were rolled under the non-lubrication condition and subsequent heat treated. In the non-lubrication rolled and subsequent heat treated Al alloy sheet, the variation of the plastic strain ratios were investigated in this study. Non-lubrication rolled Al sheets showed a fine grain size and after subsequent heat treated specimens showed that the $\beta$-fiber texture component was increased. The plastic strain ratios of the non-lubrication rolled and subsequent heat treated Al alloy sheets were about two times higher than those of the original Al sheets. These could be related to the formation of $\beta$-fiber texture components through the non-lubrication rolling and subsequent heat treatment in Al sheet.
Keywords
Aluminum Sheet; Shear Deformation; Formability; Texture; Plastic Strain Ratio; R-value;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S. Akramov, M. G. Lee, I. Kim, D. Y. Sung, B. H. Park and I. Kim, 2005, R-Value and Texture Change of AA 1050 Al Alloy Sheet by Equal Channel Angular Pressing, Mater. Sci. Forum, Vol. 495/497 p. 803   DOI
2 S. Akramov, I. Kim, M. G. Lee and B. H. Park, 2006, Sheet Formability of AA 1050 Al Alloy Sheet by Equal Channel Angular Pressing of Route C Type, Sol. State Phenon., Vol. 116/117, p. 324   DOI
3 S. Akramov, I. Kim and N. J. Park, 2007, Texture and Formability of Frictionally Rolled AA 1050 Aluminum Alloy Sheets, Adv. Mater. Research, Vol. 26/28, p. 393   DOI
4 I. Kim, S. Akramov and H. B. Jeong, 2009, Texture and Formability Development of Asymmetry Rolled AA3003 Al Alloy Sheet, Mod. Phys. letter B, in press   DOI
5 I. Kim, S. Akramov, H. B. Jeong and T. K. No, 2009, Texture Development and Drawability of Frictional Rolled AA 5052 Al Alloy Sheet, Mod. Phys. letter B, in press   DOI   ScienceOn
6 S. Akramov and I. Kim, 2009, Texture analysis and r-value variation after severe shear deformed and hear treated Al alloy sheets, J. of Physics, in press.   DOI   ScienceOn
7 H. J. Bunge, 1982, Texture Analysis in Material Science, Butterworth, Guildford, UK
8 P. H. Lequeu and J. J. Jonas, 1988, Modeling of the plastic anisotropy of textured sheet, Metal. Trans. A, Vol. 19A, p. 105   DOI
9 J. Hirsch and K. Lucke, 1988, Mechanism of deformation and development of rolling textures in polycrystalline F. C. C. metals-simulation and interpretation of experiments on the basis of Taylor-tape theories, Acta Metall. Vol. 36, pp. 2883-2904   DOI   ScienceOn
10 M. Hatherly and W. B. Hutchinson, 1979, An Introduction to Textures in Metals, Institution of Metallurgists, London
11 A. K. Vasudevan and R. D. Doherty, 1989, Aluminum Alloys-Contemporary Research and Applications, Treatise on Materials Science and Technology, Vol. 31, Academic Press
12 T. Kamijo and H. Fukutomi, 1995, In microstructural and crystallographic aspects of recrystallization (edited by N. Hansen, D. J. Jensen, Y. L. Liu and B. Ralph) Riso National Laboratory, Roskilde, Denmark, p. 377
13 C.-H. Choi, K.-H. Kim, S.-Y. Jeong and D. N. Lee, 1997, Analysis of texture in aluminum alloy sheets rolled using asymmetric roll, J. of Korean Inst. Met. Mater. Vol. 35/4, p. 429
14 K. J. Kim, H.-T. Jeong, K. S. Shin and C.-W. Kim, 2007, Texture evolution of rolled AA5052 alloy sheets after annealing, J. Mater. Process, Vol 187-188, pp. 578-581   DOI   ScienceOn
15 S. Akramov, M. G. Lee, I. Kim, D. Y. Sung and B. H. Park, 2005, The Texture of 1050 Al Sheet Produced by Equal Channel Angular Pressing, Mater. Sci. Forum, Vol. 475/479, p. 417   DOI