Browse > Article
http://dx.doi.org/10.5228/KSPP.2008.17.6.443

Design of Gate Locations, Molding Conditions, and Part Structure to Reduce the Warpage of Short-Fiber Reinforced Injection Molded Part  

Choi, D.S. (인하공업전문대학 기계설계과)
Publication Information
Transactions of Materials Processing / v.17, no.6, 2008 , pp. 443-448 More about this Journal
Abstract
Fiber reinforced injection molded parts are widely used in recent years because of their improved properties of materials such as specific stiffness, specific strength, and specific toughness. The demand for products with high precision is increasing and it is important to minimize the warpage of the products. The warpage of short-fiber reinforced product is caused by anisotropy induced by fiber orientation as well as the residual stresses induced during the molding process. In order to reduce the warpage of the part, it is important to achieve successful mold design, processing control, and part design. In the present study, the design of gating system, molding condition, and part structure were carried out and verified with numerical analysis using a commercial CAE code Moldflow. The numbers and locations of gates were iteratively determined, and the molding conditions which can decrease the warpage of the part were investigated. Finally, slight structural modification of the part was conducted to reduce the locally concentrated warpage.
Keywords
Fiber Reinforced Injection Molding; Warpage Analysis; Fiber Orientation; Numerical Analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 R. K. Irani, B. H. Kim, J. R. Dixon, 1995, Towards Automated Design of the Feed System of Injection Molds by Integrating CAE, Iterative Redesign and Features, Journal of Engineering for Industry, Transactions of the ASME, Vol. 117, No. 1, pp. 72-77   DOI
2 I. Pandelidis, Q. Zou, 1990, Optimization of Injection Molding Design. Part I : Gate Location Optimization, Polymer Engineering and Science, Vol. 30, No. 15, pp. 873-882   DOI
3 I. Pandelidis, Q. Zou, 1990, Optimization of Injection Molding Design. Part II : Molding Conditions Optimization, Polymer Engineering and Science, Vol. 30, No. 15, pp. 883-892   DOI
4 M. Saxena ,R. K. Irani, 1993, An Integrated NMTBased CAE Environment - Part II : Applications to Automated Gating Plan Synthesis for Injection Molding, Engineering with Computers, No. 9, pp. 220-230   DOI
5 P. Kennedy, 1993, Flow Analysis Reference Manual, Moldflow Pty. Ltd., Australia
6 K. H. Han, Y. T. Im, 1999, Modified Hybrid Closure Approximation for Prediction of Flow-induced Fiber Orientation, Journal of Rheology, Vol. 43, No. 3, pp. 569-589   DOI   ScienceOn