Browse > Article
http://dx.doi.org/10.5228/KSPP.2008.17.5.350

A New Manufacturing Process for the Ring Plate of Automotive Fuel Tank  

Chae, M.S. (경북대학교 기계공학과)
Lim, Y.H. (신화)
Suh, Y.S. (한남대학교 기계공학과)
Park, C.D. ((재)대구기계부품연구원)
Kim, Y.S. (경북대학교 기계공학부)
Publication Information
Transactions of Materials Processing / v.17, no.5, 2008 , pp. 350-355 More about this Journal
Abstract
Currently, in the automotive industry, the efforts to reduce the manufacturing cost by changing the manufacturing process are continually performed. In this paper, we proposed a new manufacturing process, the roll bending process of a ring plate of automotive fuel tank instead of conventional press blanking process to reduce material loss and manufacturing cost. Finite element analysis was used to optimize the roll bending process to assure rectangular cross-section of the ring plate. Also, spring-back analysis after the roll bending process was performed and dimension of the bending die considering spring-back was analyzed. Finally, we verified a possibility for realization of the proposed method with prototypes.
Keywords
Roll Bending Process; Ring Plate; Finite Element Analysis; Spring-back; Prototype;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y. S. Kim, 2008, Engineering Plasticity, Sigma Press
2 Jun Zeng, Zhaoheng Liu, Henri Champliaud, 2008, FEM dynamic simulation and analysis of the rollbending process for forming a conical tube, Journal of Materials Processing Technology, Vol. 198, pp. 330-343   DOI   ScienceOn
3 M. Hua, K. Baines, I. M. Cole, 1999, Continuous four-roll plate bending: a production process for the manufacture of single seamed tubes of large and medium diameters, International Journal of Machine Tools and Manufacture, Vol. 39, pp. 905-935   DOI   ScienceOn
4 Jin-Young Kim, Hoon Huh, 2000, Finite Element Stress Analysis of Coil Springs using a Multi-level Substructuring Method II, Journal of the Korean Society of Automotive Engineers, Vol. 8 No. 3, pp. 151-162
5 Weilong Hu, Z. R. Wang, 2001, Theoretical analysis and experimental study to support the development of a more valuable roll-bending process, International Journal of Machine Tools and Manufacture, Vol. 41, pp. 731-747   DOI   ScienceOn
6 J. B. Yang, B. H. Jeon, S, I, Oh, 2000, Tube Bending Analysis for Hydroforming Process, Transactions of Materials Processing, Vol. 9, No. 3, pp. 249-256
7 Hyun Jin Kim, Choon Man Lee, 2007, A Study on the Bending Process for Precision Pipe Forming, Journal of the Korean Society of Precision Engineering, Vol. 24, No. 6, pp. 58-65   과학기술학회마을