Browse > Article
http://dx.doi.org/10.5228/KSPP.2008.17.2.097

Prediction of Springback by Using Constitutive Equations of Mg Alloy Sheets  

Lee, M.G. (한국기계연구원 부설 재료연구소)
Chung, K. (서울대학교 재료공학부)
Kim, S.J. (한국기계연구원 부설 재료연구소)
Kim, H.Y. (강원대학교 기계 메카드로닉스 공학부)
Publication Information
Transactions of Materials Processing / v.17, no.2, 2008 , pp. 97-101 More about this Journal
Abstract
Unique constitutive behavior of magnesium alloys as one of hexagonal close packed(hcp) metals has been implemented into the commercial finite element program ABAQUS. The constitutive equations can represent asymmetry in tension-compression yield stresses and flow curves. For the verification purpose, the springback of AZ31B magnesium alloy sheet was measured using the unconstrained cylindrical bending test proposed in Numisheet'2002 benchmark committee. Besides the developed constitutive models, the isotropic models based on tensile and compressive properties were also considered for comparison purpose. The predicted results by the finite element analysis and corresponding experiments showed enhanced prediction capability in springback analysis.
Keywords
Magnesium Alloy Sheet; Asymmetry; Constitutive Equations; Springback; Unconstrained Cylindrical Bending Test;
Citations & Related Records
연도 인용수 순위
  • Reference
1 D. J. Yoon, S. J. Lim, E. J., Kim, C. Cho, 2006, Plastic Forming Characteristics of AZ3l Mg Alloy in Warm Backward Extrusion, Trans. Mater. Proc., Vol. 15, p. 597
2 X. Y. Lou, M. Li, R. K. Boger, S. R. Agnew, R. H. Wagoner, 2007, Hardening Evolution of AZ31B Mg Sheet, Int. J. Plast. Vol. 23, p. 44   DOI   ScienceOn
3 M. G. Lee, D. Kim, C. Kim, M. L. Wenner, R. H. Wagoner, K. Chung, 2007, A practical two-surface model and its application to springback prediction, Int. J. Plast., Vol. 23, p. 1189   DOI   ScienceOn
4 K-R. Cho, J-T. Yeom, S-Y. Shim, S-G. Lim, N-K. Park, J-H. Kim, 2007, Characteristics on the Hot Extrusion of Semi-Solid Al-Zn-Mg Alloy, Trans. Mater. Proc., Vol. 16, p. 391
5 N-Y. Kim, J-H. Kim, J-T. Yeom, D-G. Lee, S-G. Lim, N-K. Park, J-H. Kim, 2006, Effect of Processing Condition on the Hot Extrusion of Al-Zn-Mg-Sc Alloy, Trans. Mater. Proc., Vol. 15, p. 143
6 M. G. Lee, R. H. Wagoner, K. Chung, J. K. Lee, H. Y. Kim, 2007, Constitutive Modeling for Anisotropic/ Asymmetric Hardening Behavior of Magnesium alloy sheets, Int. J. Plast., Vol. 24, p. 545   DOI   ScienceOn
7 Numisheet' 2002 Benchmark Problem, 2002, In: D. Y. Yang, S. I. Oh, H. Huh, Y. H. Kim, (Eds.), Proceedings of 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju, Korea
8 D. J. Yoon, E. Z. Kim, Y. S. Lee, 2007, Finite Element Study on Deformation Characteristics and Damage Evolution in Warm Backward Extrusion of AZ31 Mg Alloys, Trans. Mater. Proc., Vol. 16, p. 614
9 M. G. Lee, K. Chung, H. Y. Kim, 2007, Constitutive Modeling of AZ31B Magnesium Alloys, Trans. Mater. Proc., Vol. 16, p. 234
10 M. G. Lee, S.J. Kim, R. H. Wagoner, K. Chung. H. Y. Kim, 2007, Constitutive Modeling for Anisotropic /Asymmetric Hardening Behavior of Magnesium alloy sheets: Application to sheet springback, Int. J. Plast.,(submitted)
11 C. S. Roberts, 1960, Magnesium and its alloys, New York: John Wiley
12 J. G. Choi, S. C., Choi, M. G. Lee, H. Y. Kim, 2007, Measurement of Springback of AZ31B Mg Alloy Sheet in OSU Draw/bend Test, Trans. Mater. Proc., Vol. 16, p. 447
13 B-H. Lee, Y-W. Kim, S-H. Park, C-S. Lee, 2007, Effect of Initial Texture on the Twinning Formation of AZ31 Mg Alloy , Trans. Mater. Proc., Vol. 16, p. 467