Browse > Article
http://dx.doi.org/10.5228/KSPP.2008.17.2.091

Critical Parameters to Improve the Fatigue Properties in the High Carbon Steel Wires  

Yang, Y.S. (포항공과대학교)
Bae, J.G. (고려제강 기술연구소)
Park, C.G. (포항공과대학교)
Publication Information
Transactions of Materials Processing / v.17, no.2, 2008 , pp. 91-96 More about this Journal
Abstract
The governing parameters affecting the fatigue properties have been investigated experimentally in the high carbon steel wires with 0.94 wt.%C. In order to find the crucial factors, the advanced analysis techniques such as optical 3-D profiler, focused ion beam(FIB) and transmission electron microscope(TEM) were used. The two-type steel wires with different drawing strain were fabricated. The fatigue properties were measured by hunter rotating beam tester, specially designed for thin-sized steel wires. It was found that the fatigue properties of the steel wires with high drawing strain was higher than that with other wires because of low residual stress and high adhesion condition of brass coating layer.
Keywords
Fatigue Properties; Residual Stress; Surface Defect; Microstructure; Hyper-eutectoid Steel Wire;
Citations & Related Records
연도 인용수 순위
  • Reference
1 J. LLorca, V. Sanchez-Galvez, 1989, Fatigue limit and fatigue life prediction in high strength cold drawn eutectoid steel wires, Fatigue Fract. Engng. Mater. Struct., Vol. 12, pp. 31-45   DOI
2 J. D. Embury, R. M. Fisher, 1966, K. Katagiri, T. Sato, H. S. Shin, L. Takahashi, H. Tashiro, S. Sasaki, 1997, Effects of drawing strain and bluing on the fatigue strength of eutectoid steel wires, Fatigue Fract. Engng. Mater. Struct., Vol. 20, pp. 1677-1686   DOI   ScienceOn
3 M. Dollar, I. M. Bernstein, A. W. Thompson, M. Shemenski, 1988, Influence of deformation substructure on flow and fracture of fully pearlitic steel, Acta Metall., Vol. 36, pp. 311-320   DOI   ScienceOn
4 K. Katagiri, T. Sato, H. S. Shin, L. Takahashi, H. Tashiro, S. Sasaki, 1997, Effects of drawing strain and bluing on the fatigue strength of eutectoid steel wires, Fatigue Fract. Engng. Mater. Struct., Vol. 20, pp. 1677-1686   DOI   ScienceOn
5 I. Verpoest, E Aernoudt, A Deruyttere, M De Bondt, 1985, The fatigue threshold, surface condition and fatigue limit of steel wire, 1985, Int. J. Fatigue Vol.7, pp.199-214   DOI   ScienceOn
6 Y. S. Yang, J.G. Bae, C.G. Park, 2007, Measurement of the Residual Stress in the Steel Wires by using Focused Ion Beam and Digital Image Correlation Method, Trans. Mater. Proc., Vol. 16, pp.323-328
7 W, J. Nam, K. T. Park, J. Y. Chung, 2004, Development of Steel Wires for Bridge Cables, Trans. Mater. Proc., Vol. 13, pp.479-483
8 Y. S. Yang, J. G. Bae, C. G. Park, 2007, Measurement of residual stress by using focused ion beam and digital image correlation method in the thin-sized wires used for steel cords, J. of Physics(under review)