Browse > Article
http://dx.doi.org/10.5228/KSPP.2007.16.3.163

Development of Automatic Drawing Program for Hemming Unit by AutoCAD  

Kim, D.S. (한국폴리텍1 성남대학 컴퓨터응용기계과)
Song, Y.J. (건국대학교 기계설계학과 대학원)
Chung, H. (건국대학교 기계설계학과 대학원)
Kim, Y.B. (건국대학교 기계항공공학부)
Hahn, Y.H. (건국대학교 기계항공공학부)
Publication Information
Transactions of Materials Processing / v.16, no.3, 2007 , pp. 163-171 More about this Journal
Abstract
Due to the complicated character of the hemming process for automobile panels, it is very difficult to setup a consistent and reliable die design guide rule that require subtle decision of experienced experts and multiple trials during hemming die design and making. In this paper an automatic die design system of hemming units is pursued by presenting some algorithms, in which geometric data and constraints of the hemming units were converted to formula. The geometries and kinematics of all part for two kinds of hemming units, 2-link type and 4-link type were analysed kinematically to build the design algorithm. The algorithms were verified by automatic drawing used AutoCAD VBA program in example for the hemming unit design of a bonnet.
Keywords
Hemming; 2-link Hemming Unit; 4-link Hemming Unit; Main Hemming; Pre-hemming; Drive Cam;
Citations & Related Records
연도 인용수 순위
  • Reference
1 한규희, 2000, 헤밍가공의 성형 품질에 관한 실험적 연구, 고려대 석사학위논문
2 최원목, 임재규, 박춘달, 김형종, 2003, 간이 모델을 이용한 헤밍공정변수 연구 및 헤밍품질평가, 한국소성가공학회 추계학술대회 논문집, pp113-116
3 안덕찬,이경돈, 인정재, 김권희, 2000, 자동차패널의 헤밍공정 설계에 관한 연구, 한국소성가공학회지, 제 9권, pp.624-630
4 김헌영, 임희택, 최광용, 이우흥,박춘달, 2002, 자동차 외판 플랜징/헤밍공정에 대한 유한요소해석 모델링, 한국소성가공학회 춘계학술대회 논문집, pp103-107
5 H. Livatyalia, T. Altan, 2004, Experimental investigation of forming defects in flat surfaceconvex edge hemming, pp.20-27
6 정효상, 이성수, 2001, 자동차 BONNET 헤밍금형의 설계 및 제작에 관한 연구, 건국기술연구 논문지, 제 26집, pp. 191-203