Browse > Article
http://dx.doi.org/10.5228/KSPP.2006.15.1.009

Fabrication of Ultra Small Size Hole Array on Thin Metal Foil  

Rhim S. H. (한국기술교육대학교 기계정보공학부)
Son Y. K. (서울대학교 기계항공공학부)
Oh S. I. (서울대학교 기계항공공학부)
Publication Information
Transactions of Materials Processing / v.15, no.1, 2006 , pp. 9-14 More about this Journal
Abstract
In the present research, the simultaneous punching of ultra small size hole of $2\~10\;{\mu}m$ in diameter on flat rolled thin metal foils was conducted with elastic polymer punch. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of 1.5fm in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The process set-up is similar to that of the flexible rubber pad farming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions. The effects of the wafer die hole dimension and heat treatment of the workpiece on ultra small size hole formation of the thin foil were discussed. The process condition such as proper die shape, pressure, pressure rate and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole away in a one step operation.
Keywords
Ultra Small Hole Array; Punching; Wafer Die;
Citations & Related Records
연도 인용수 순위
  • Reference
1 H. Watari, H. Ona, Y. Yoshida, 2003, Flexible punching method using an elastic tool instead of a metal punch, J. of Mater. Process Technol., Vol.137, pp. 151-155   DOI   ScienceOn
2 B. Y. Joo, S. I. Oh, Y. K. Son, 2004, Forming of micro channels with ultra thin metal foils, Annals of the CIRP, Vol.53/1, pp. 243-246   DOI   ScienceOn
3 P. Rai-Choudhury, Handbook of microlithography, micromachining, and microfabrication, Vol.2:Micromachining and microfabrication, SPIE Optical Engineering Press
4 M. Geiger, F. Vollertsen, R. Kals, Fundamentals on the manufacturing of sheet metal microparts, Annals of the CIRP, Vol.45/1, pp. 277-282   DOI   ScienceOn
5 B. Y. Joo, S. I. Oh, B. H. Jeon, 2001, Development of micro punching system, Annals of the CIRP, Vol. 5011, pp 191-194
6 S. H. Rhim, S. Y. Shin, B. Y. Joo, S. I. Oh, 2006, Burr formation during micro via-hole punching process of ceramic and PET double layer sheet, Int. J. of Adv. Manufacturing Technology, (to be published)
7 S. H. Rhim, Y. K. Son, S. I. Oh, 2005, Punching of ultra small size hole array, Annals of the CIRP, Vol. 5411, pp. 261-264
8 T. Altan, S. I. Oh, H. L. Gegel, 1983, Metal forming: Fundamental and applications, American society for metal
9 Y. Kurosaki, 1990, Studies on microplastic working, Advanced Technology of Plasticity, Vol.2, pp. 1059-1064
10 F. Takahashi, T. Nishimura, I. Suzuki, 1991, A method of blanking from amorphous alloy foils using rubber tool, Annals of the CIRP, Vol.40/1, pp. 315-318   DOI   ScienceOn