1 |
김영석, 1992, 알루미늄 판재성형기술의 현황과 과제, 한국자동차공학회지, Vol. 14, No. 1, pp. 3-12
|
2 |
Y. S. Kim, C. Kim, S. Y. Lee, S. Y. Won, S. M. Hwang, 2003, Forming limits for anisotropic sheet metals, JSME Int. J., Vol. 46A, No.4, pp. 627-634
|
3 |
D. Li, A. Ghosh, 2003, Tensile deformation behavior of aluminum alloys at warm forming temperatures, Mat. Sci. Eng., Vol. 352A, pp. 279-286
|
4 |
원성연, 오상균, Kozo Osakada, 박진기, 김영석, 2004, AZ31 마그네슘 합금 판재의 기계적 특성 평가(1), 한국소성가공학회 2004 년도 춘계 학술대회 논문집, pp. 53-56
|
5 |
L. Lin, Z. Liu, L. Chen, T. Liu, S. Wu, 2004, Microstructure evolution and low temperature superplasticity of ZK40 magnesium alloy subjected to ECAP, Met. Mat. Int., Vol. 10, No. 6, pp. 501-506
DOI
ScienceOn
|
6 |
김영석, 2003, 소성역학, 시그마프레스
|
7 |
R. Hill, 1950, The Mathematical Theory of Plasticity, Oxford University Press, Oxford, UK
|
8 |
R. W. Logan, and W. F. Hosford, 1980, Upper-bound anisotropic yield locus calculations assuming<111> pencil glide, Int. J. Mech. Sci., Vol. 22-7, pp. 419-430
|
9 |
R. Hill, 1979, Theoretical plasticity of textured aggregates, Proc. Camb. Phil. Soc., Vol. 85, pp. 179-191
|
10 |
김영석, 원성연, 박진기, 신효동, 2005, 알루미늄(3004-O)판재의 기계적 특성 분석
|
11 |
이영선, 김민철, 권용남, 이정환, 2004, Mg 합금 판재 냉간 성형품의 탄성회복량 예측, 한국소성가공학회 2004 년도 춘계학술대회 논문집, pp. 43-46
|
12 |
Nahed A. El-Mahallawy, Mohamed A. Taha, Engenius Pokora, and Friedrich Klein, 1998, On the influence of process variables on the thermal conditions and properties of high pressure die-cast magnesium alloys, J. Mat. Pro. Tech., Vol. 73, pp. 125-138
DOI
ScienceOn
|
13 |
B.H. Hu, K.K. Tong, X.P. Niu, and I. Pinwill, 2000, Design and optimization of runner and gating systems for the die casting of thin-walled magnesium telecommunication parts through numerical simulation, J. Mat. Pro. Tech., Vol. 105, pp.128-133
DOI
ScienceOn
|
14 |
김수현, 임창동, 유봉선, 서영명, 정인상, 2004, 열간 압연한 AZ31 마그네슘 합금 판재의 미세조직 발달에 관한 연구, 제 5 회 압연심포지엄, 한국소성가공학회, pp. 63-71
|