1 |
S. W. Lee, D. Y. Yang, 1998, 'An assessment of numerical parameters influencing springback in explicit finite element analysis of sheet metal forming process', Journal of Materials Processing Technology, Vol. 80-81, pp. 60-67
DOI
ScienceOn
|
2 |
양동열, 이상욱, 윤정환, 유동진, 1999, '박판 성형에서의 스프링백 해석과 산업적 응용', 한국소성가공학회지, 제8권 제1호, pp. 22-28
|
3 |
이호용, 황병복, 1994, '3점 굽힘에서의 스프링백에 관한 연구', 한국소성가공학회지, 제3권 제4호, pp. 401-414
|
4 |
김성환, 신장모, 장성호, 서대교, 2001, '차체 성형용 판재의 U벤딩시의 스프링백에 관한 연구', 한국소성가공학회 추계학술대회 논문집, pp. 66-70
|
5 |
이상무, 장성호, 최이천, 허영무, 서대교, 2001, '박판의 온간 2차원 드로오 벤딩에서의 스프링백', 한국소성가공학회 추계학술대회 논문집, pp. 75-80
|
6 |
C. H. Lee, H. Huh, S. S. Han, O. Kwon, 'Optimum Design of Tailor Welded Blanks in Sheet Metal Forming Process by Inverse Finite Element Analysis', METALS AND MATERIALS, Vol. 4, No. 3, pp. 222-225
|
7 |
K. M. Zhao, B. K. Chun, J. K. Lee, 2001, 'Finite element analysis of tailor-welded blanks', Finite Elements in Analysis and Design, Vol. 37, pp. 117-130
DOI
ScienceOn
|
8 |
Y. M. Heo, Y. H. Choi, H. Y. Kim, D. G. Seo, 2001, 'Characteristics of weld line movements for the deep drawing with drawbeads of tailor-welded blanks', Journal of Materials Processing Tech-nology, Vol. 111, pp. 164-169
DOI
ScienceOn
|
9 |
R. J. Pallett, R. J. Lark, 2001, 'The use of tailored blanks in the manufacture of construction components', Journal of Materials Processing Technology, Vol. 117, pp. 29-254
|
10 |
William Wing-Leung Tse, B. Eng., 1985, Mechani-cs of Bending And Springback of Sheet Metal, A Thesis Submitted to the School of Graduate Studies in Partial Fulfillment of the Requirements for the Degree Master of Engineering, McMaster Univ.
|
11 |
F. Pourboghrat, E. Chu, 1995, 'Prediction of spring-back and side-wall curl in 2-D draw bending', Journal of Materials Processing Technology, Vol. 50, pp. 371-374
|
12 |
T. Uemori, T. Okada, F. Yoshida, 1998, 'Simulation of Springback in V-bending Process by Elasto-Plastic finite Element Method with consideration of Bauschinger Effect', METALS AND MATERIALS, Vol. 4, No. 3, pp. 311-314
|