Browse > Article
http://dx.doi.org/10.5228/KSPP.2004.13.1.045

Effect of Ball End Mill Cutting Environments on Machinability of Hardened Tool Steel  

이영주 (서울산업대학교 산업대학원 정밀기계공학과)
원시태 (서울산업대학교 금형설계학과, 정밀기계기술연구소)
Publication Information
Transactions of Materials Processing / v.13, no.1, 2004 , pp. 45-52 More about this Journal
Abstract
This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.
Keywords
Hardened Tool Steel (STD11, KP4); Ball End Milling; Machinability; Cutting Speed; Feed per Revolution; Dry Cutting; Minimum Quantity Lubrication(MQL);
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Tool Wear and Tool Life /
[ N.H.Cook. ] / J. of Engineering for Industry, Trans. of ASME
2 Development of ultra high speed milling machine /
[ T.Majiama. ] / procedding 6th International Machine Tools Engineering
3 Dry Cutting Performance of (Al, Ti)N coated Carbide Endmills for High Speed Machining /
[ S.Kitaura (et al.) ] / Tool and TECH.
4 난삭성 재료의 가공환경변화에 따른 고속가공 특성평가 (압축공기냉각에 의한 공구수명 평가) /
[ 김석원외. ] / 한국공작기계학회지   과학기술학회마을
5 볼 엔드밀 옆날 여유각이 고경도 강재의 절삭특성에 미치는 영향 /
[ 이영주외. ] / 한국소성가공학회 추계학술대회 논문집
6 CBN 볼 엔드밀의 마모 메커니즘에 관한 연구 /
[ 최상우외. ] / 한국정밀공학학회지   과학기술학회마을
7 볼 엔드밀 가공에서 고경도 강재의 절삭 특성에 관한 연구 /
[ 원시태외. ] / 한국소성가공학회 금형가공심포지움
8 High Speed Ball End Milling for difficult-to-cut materials /
[ Lee.D.W. ] / Proceeding of the International Machine Tool Technical Seminar
9 TiAlN코팅 고속도강 공구의 개발 및 공구수명 평가 /
[ 이영문외. ] / 한국정밀공학학회지   과학기술학회마을
10 The Use of High Speed Machining for the Manufacture of Hardened Steel Dies. /
[ R.C.Dewes(et al.) ] / Transactions of the NAMRI of SME
11 환경 친화적인 절삭가공기술 /
[ 이종항외. ] / 한국정밀공학학회지   과학기술학회마을
12 The Performance of Titanium-Nitride Coated HSS Tools /
[ M.Bruno(et al.) ] / Trans. of ASME
13 /
[ 양민양저. ] / 절삭가공(이론과 실제)
14 압축냉각공기를 이용한 환경 친화적 연삭 가공기술 /
[ 최헌종외. ] / 한국정밀공학회지   과학기술학회마을
15 환경친화적 기계가공을 위한 기계적ㆍ열적측면에서의 절삭유제 사용효과에 관한 연구 /
[ 모용구외. ] / 한국정밀공학학회지   과학기술학회마을
16 고속용 엔드밀의 성능평가에 관한 연구 /
[ 이정길외. ] / 한국정밀공학학회, 추계학술대회 논문집