Browse > Article
http://dx.doi.org/10.5228/KSPP.2003.12.5.504

A Study on the Evaluation of the Automatic Measurement Method of Plastic Strain Ratio by Two Extensometers  

김인수 (금오공과대학교 신소재시스템공학부)
Publication Information
Transactions of Materials Processing / v.12, no.5, 2003 , pp. 504-512 More about this Journal
Abstract
The plastic strain ratios(R-values) of low carbon steel sheets were determined by the automatic strain measurement method using two extensometers, the indirect photo method for the same tensile specimen during tensile test and the indirect method for the specimen after tensile test. The experimental results showed that the measured plastic strain ratios from the automatic strain measurement method using two extensometers coincided with those from the indirect photo method and the indirect method for all tensile specimens. In addition, the strain dependence of plastic strain ratios could be continuously recorded and the anisotropy of the strength coefficient, K, and strain hardening exponent, n, could be automatically calculated in three directions by computer through the use of two extensometers. The experimental results showed that the strain dependence of R-value was related to the anisotropy of strain hardening exponent in low carbon steel sheets.
Keywords
Plastic Strain Ratio; R-Value; Automatic Measurement Method; Tensile Test; Extensometer; Direct Method; Indirect Method;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Hu, H., July 1983, ibid, "on the strain dependence of plastic strain ratio of deep drawing sheet steels", 14A, pp. 1521-1523.   DOI
2 Oween, L. J., Sidey, M. P. and Atkinson, M., "Automatic measurement of r values", June 1971, Sheet metal industries, pp. 476-482.
3 Hu, H., April 1975, "The strain dependence of plastic strain ratio($r_{m}$-value) of deep drawing sheet steels determined by simple tension test", Metallurgical Transactions A, 6A, pp. 945-947.   DOI
4 Arthey, R. P. and Hutchinson, W. B., October 1981, "Variation of plastic strain ratio with strain level in steels", Metallurgical Transactions A, 12A, pp. 1817-1822.   DOI
5 Kim, I., Private Experiment.
6 Hu, H., December, 1975, "Effect of plastic strain on the r value of textured steel sheet", Metallurgical Transactions A, 6A, pp. 2307-2309.   DOI
7 Duncan, J. L., Goni, E. Johnson, W. 1967," Measurement of normal plastic anisotropy in steel metal", The J of the Australian Institute of Metals, Vol. 12, No. 2, pp. 127-138.
8 I.D.D.R.G. Working GroupⅡ, Brief Report of the Joint Research Work, Liege, June 1966.
9 Hu, H., June 1976, "Discussion of influence of strain on the plastic strain ratio in cubic metals", Metallurgical Transactions A, 7A, pp. 905-906.   DOI
10 Fukui, S. and Tana, N., June 1966, I.D.D.R.G.Document, Liege.
11 Jegaden, G., Voinchet, J. and Rocquet, P. April 1966, I.D.D.R.G. Document.
12 Fukui, S. and Yoshida, K., 1964, Sci. Papers Inst. Phys. Chem. Research, Japan, 58, p 1.
13 Marinelli, S. V., June 1966, I.D.D.R.G Document, Liege.
14 Liu, Y. C., 1983, "On the R value measurement", Metall. Trans. A. 14A, pp. 1199-1205.
15 Jegaden, G., Voinchet, J. and Rocquet, P. 1962, 4187, Letter, Nature, p. 771.   DOI
16 Liu, Y. C. and Johnson, I., K., Agurst 1985, "Hill's plastic strain ratio of sheet metals", Metallurgical Transactions A, 16A, pp. 1531-1535.   DOI
17 Liu, Y. C. December 1983, ibid, "On the determination of Hill's plastic strain ratio", 14A, pp. 2566-2567.   DOI
18 Lake, J. S. H., Willis, D. J. and Fleming, H. G., November 1988, "The variation of plastic anisotropy during straining", Metallurgical Transactions A, 19A, pp. 2805-2817.   DOI
19 Liu, Y. C., June 1983, "On the R Value measurement" Metallurgical Transactions A, 14A pp. 1199-1205.   DOI
20 Jeong, H. T. and Lee, D. N., 1977, "Variation in the plastic strain ratio with tensile strain", J. of the Korean Inst. of Met. & Mater. V. 35, No. 5, pp. 550-557.