1 |
S. W. Lee, D. Y. Yang, 1998, "An assessment of numerical parameters influencing springback in explicit finite element analysis of sheet metal forming process", Journal of Materials Processing Technology, Vol. 80-81, pp. 60-67.
DOI
ScienceOn
|
2 |
이호용, 황병복, 1994, "3점 굽힘에서의 스프링백에 관한 연구", 한국소성가공학회지, 제3권 제4호, pp. 401-414.
과학기술학회마을
|
3 |
R. J. Pallett, R. J. Lark, 2001, "The use of tailored blanks in the manufacture of construction components", Journal of Materials Processing Technology, Vol. 117, pp. 29-254.
|
4 |
C. H. Lee, H. Huh, S. S. Han, O. Kwon, "Optimum Design of Tailor Welded Blanks in Sheet Metal Forming Process by Inverse Finite Element Analysis", METALS AND MATERIALS, Vol. 4, No. 3, pp. 222-225
|
5 |
K. M. Zhao, B. K. Chun, J. K. Lee, 2001, "Finite element analysis of tailor welded blanks", Finite Elements in Analysis and Design, Vol. 37. pp. 117-130.
DOI
ScienceOn
|
6 |
Manual, 2000, ESI
|
7 |
F. Pourboghrat, E. Chu, 1995, "Prediction of spring-back and side-wall curl in 2-D draw bending", Journal of Materials Processing Technology, Vol. 50, pp. 31-374.
|
8 |
T.Uemori, T. Okada, F. Yoshida, 1998, "Simulation of Springback in V -bending Process by ElastoPlastic finite Element Method with consideration of Bauschinger Effect", METALS AND MATERIALS, Vol. 4, No. 3, pp. 311-314.
과학기술학회마을
|
9 |
M. J. Finn, P. C. Galbraith, L. Wu, J. O. HallQuist, L. Lum, T. -L. Lin, 1995, "Use of a coupled explicit implicit solver for calculating spring back in automotive body panels", Journal of Materials Processing Technology, Vol. 50, pp. 395-409.
DOI
ScienceOn
|
10 |
양동열, 이상욱, 윤정환, 유동진, 199, "박판 성형에서의 스프링백 해석과 산업적 응용", 한국소성가공학회지, 제8권 제1호, pp. 22-28.
과학기술학회마을
|
11 |
William Wing-Leung Tse, B. Eng., 1985, Mechanics of Bending And springback of Sheet Metal, A Thesis Submitted to the School of Graduate Studies in Partial Fulfillment of the Requirements for the Degree Master of Engineering, McMaster Univ.
|
12 |
김성환, 신장모, 장성호, 서대교, 2001, "차체 성형용 판재의 U벤딩시의 스프링백에 관한 연구", 한국소성가공학회 추계학술대회 논문집, pp. 66-70.
|
13 |
이상무, 장성호, 최이천, 허영무, 서대교, 2001, "박판의 온간 2차원 드로오 벤딩에서의 스프링백", 한국소성가공학회 추계학술대회 논문집, pp. 75-80.
과학기술학회마을
|
14 |
Y. M. Heo, Y. H. Choi, H. Y. Kim, D. G. Seo, 2001, "Characteristics of weld line movements for the deep drawing with drawbeads of tailor welded blanks", Journal of Materials Processing Technology, Vol. 111, pp. 164-169.
DOI
ScienceOn
|