1 |
V. Nagpal and T.Altan, 1975, "Analysis of the Three-Dimensional Metal Forming in Extrusion of Shapes with Use of Dual Stream Functions", Proc. 3rd North American Met. Res. Conf. Pittsburgh, Penssylvenia, pp. 26-40.
|
2 |
유동진, 임종훈, 2003, "B-스플라인 곡면 기법을 이용한 압출 금형 곡면의 표현 방법에 관한 연구", 한국소성가공 학회지, Submitted.
|
3 |
K.F. Celik and N.R Chitkara, 2002, "Extrusion of non-symmetric U and l-shaped sections through ruled-surfacc dies : numerical simulations and some experiments", Int. J. Mech. Sci., Vol. 44, pp. 217-246.
DOI
ScienceOn
|
4 |
V. Nagpal, 1977, "On the Solution of Three-Dimensional Metal Forming Processes", J. Eng. Ind. Trans. ASME Series B. Vol. 99, pp. 624-629.
DOI
|
5 |
N.R. Chitkara and K.F. Celik, 2001, "Extrusion of non-symmetric T-shaped sections, an analysis and some experiments", Int. J. Mech. Sci., Vol. 43, pp. 2961-2987.
DOI
ScienceOn
|
6 |
Les Piegl and Wayne Tiller, 1995, The NURBS Book, Springer.
|
7 |
J.S. Gunasekera, H.L. Gegel, J.C. Malas and S.M. Doraivelu, 1982, "Computer Aided Process Modeling of Hot Forging and Extrusion of Aluminum Alloys", Annals of CIRP, Vol. 31 No. 1, pp. 131-136.
DOI
ScienceOn
|
8 |
K.F. Celik and N.R. Chitkara, 2000, "Application of an upper bound method to off centric extrusion of square sections, analysis and experiments", Int. J. Mech. Sci., Vol, 42, pp. 321-345.
DOI
ScienceOn
|
9 |
D.Y. Yang and C.H. Lee, 1978, "Analysis of Three-Dimensional Extrusion of Section through Curved Dies by Conformal Transformation", Int. J. Mech. Sci, Vol. 20, pp. 541-552.
DOI
ScienceOn
|
10 |
D.Y. Yang, C.H. Han and M.U. Kim, 1986, "A generalized method for analysis of three-dimensional extrusion of arbitrarily shaped sections", Int. J. Mech. Sci., Vol. 28, pp. 517-534.
DOI
ScienceOn
|
11 |
M. Kiuchi, 1984, "Overall Analysis of Non-Axisymmetric Extrusion and Drawing", Proc. of 12th NAMRC, pp. 111-119.
|
12 |
J.S. Gunasekera and S. Hoshino, 1980, "Analysis of Extrusion of Non-Circular Sections through Shaped Dies", Annals of CIRP, Vol. 29, pp. 141-145.
DOI
ScienceOn
|