Browse > Article
http://dx.doi.org/10.5228/KSPP.2002.11.6.519

Microstructural Evolution during the Equal Channel Angular Pressing of Ti-6Al-4V Alloy  

고영건 (포항공과대학교 신소재공학과)
정원식 (한양대학교 금속재료공학과)
신동혁 (한양대학교 금속재료공학과)
이종수 (포항공과대학교 신소재공학과)
Publication Information
Transactions of Materials Processing / v.11, no.6, 2002 , pp. 519-528 More about this Journal
Abstract
The microstructural evolution during the equal channel angular pressing of Ti-6Al-4V alloy was investigated using the transmission electron microscopy (TEM). ECA pressing was carried out isothermally with route C at $600^{\circ}C$ for two types of initial microstructure, i.e., equiaxed and Widmanstatten microstructures. At an initial stage of ECA pressing, the equiaxed microstructure showed more uniform flow than the Widmanstatten microstructure. However, both microstructures were significantly refined revealing nearly equiaxed grains of 0.3$mu extrm{m}$ in diameter with high angle grain boundaries after 4 passes of ECA pressing. These ultrafine gains were found to be stable with little grain growth, when annealed up to $600^{\circ}C$ for 1hr.
Keywords
Equal Channel Angular Rressing; Ti-6Al-4V Alloy; Ultrafine Grain; High Angle Grain Boundary;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Partridge P. G., 1968, The Crystallography and Deformation Mode of HCP Metals, Met. Rev., vol.118, p. 169
2 Koch, C. C. and Cho, Y. S., 1992, Nanostruct. Mater., vol1, pp. 207-212.   DOI   ScienceOn
3 Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T. G., 1998, Acta Mater., vol.46, pp.3317-3331.   DOI   ScienceOn
4 Nadai, A, 1950, Theory of Flow and Fracture of Solids, 1, McGraw-Hill, NewYork, Ch.23.
5 Semiatin, S. L. and Jonas, J. J., 1984, Formability and Workability of Metals, ASM, Metals Park, OH.
6 Sevillano, G., Houtte, V., and Aernoudt, E. 1980, Prog. Mater. Sci., vol.25, pp. 69-412.   DOI   ScienceOn
7 Jones, H, 1994, Key Eng. Mater., vol.97, p.1.   DOI
8 Valiev, R. Z., Islamgaliev, R. K. and Alexandrov, I. V, 2000, Prog. Mater. Sci., vol.45, p, 103-189.   DOI   ScienceOn
9 Iwahashi, Y., Horita, Z., Nemoto, M. and Langdon, T. G., 1997, Acta Mater., vol.45, pp.4733-4741.   DOI   ScienceOn
10 Valiev, R. Z., Ivanisenko, Y. V., Rauch, E. F. and Baudelet, B., 1996, Acta Mater., vol.44, pp.4705-4712.   DOI   ScienceOn
11 Semiatin, S. L. and DeLo, D. P.. 2000, Materials and Design, vol.21, pp. 311-322.   DOI   ScienceOn
12 Mabuchi, M., Iwasaki, H., Yanase, K., and Higashi, K., 1997, Scripta Mater., vol.36, pp.681-686.   DOI   ScienceOn
13 Segal, V. M., 1995, Mater. Sci. Eng., vol.A197, pp.157-164
14 Yamaguchi, D., Horita, Z., Nemoto, M. and Langdon, T. G., 1999, Scripta Mater., vol.41, pp. 791-796.   DOI   ScienceOn
15 DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 1425-1435.
16 Segal, V. M., Reznikov, V. I., Drobyshevskiy, A. E. and Kopylov, V. I., 1981, Russian Metall., vol.1, p.99.
17 고영건, 정원식, 신동혁, 이종수, 2002, 한국소성가공학회 2002년도 춘계학술대회 논문집, pp. 177-180.
18 Ferrasse, S., Segal, V. M, Hartwig, K. T. and Goforth, R. E., 1997, Metall. Mater. Trans., vol. A28, pp. 1047-1057.
19 Shin, D. H., Kim, I., Kim, J. and Park, K. T., 2001, Acta Mater., vol.48, pp. 1285-1292.
20 Mishra, R. S., Stolyarov, V. V., Echer, C., Valiev, R. Z. and Mukherjee, A. K., 2001, Mater. Sci. Eng., vol.A298. pp. 44-50.
21 DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 2473-2481.
22 Kim, I., Jeong, W. S., Kim, J., Part, K. T. and Shin, D. H., 2001, Scripta Mater., vol.45, pp. 575-580.   DOI   ScienceOn
23 Shin, D. H, Kim, B. C, Kim, Y. S. and Park, K T, 2000, Acta Mater., vol.48, pp. 2247-2255.   DOI   ScienceOn
24 Stolyarov, V. V., Zhu, Y. T., Alexandrov, I. V., Lowe, T. C.and Validv, R. Z., 2001, Mater. Sci. Eng., vol.A299, pp. 59-67.
25 DeLo D. P. and Semiatin, S. L., 1999, Metall. Mater. Trans., vol.30A, pp. 1391-1402.
26 Semiatin, S. L. and Bieler, T. R., 2001, Acta Mater., vol.49, pp. 3565-3573.   DOI   ScienceOn