Browse > Article
http://dx.doi.org/10.5228/KSPP.2002.11.6.503

Elastic-plastic Finite Element Analysis of Drawbead Forming for Evaluation of Equivalent Boundary Conditions in Sheet Metal Forming - Part I : Evaluation  

Park, J.S. (한국과학기술원 기계공학과)
Kim, S.H. (한국과학기술원 기계공학과)
Huh, H. (한국과학기술원 기계공학과)
Publication Information
Transactions of Materials Processing / v.11, no.6, 2002 , pp. 503-512 More about this Journal
Abstract
The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.
Keywords
Drawbead; Equivalent Boundary Condition; Sheet Metal Forming; Finite Element Method;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y. You, P. Y. Hong and R. X. Yu, "Calculation of Drawbead Restraining Forces associated with Kinematic Hardening Rule", proc. NUMIFORM'98, pp. 905-910, 1998
2 F. Yoshida and M Urabe, "Computer-aidad Process Design for the Tension Levelling of Metallic Strips", J. Mater. Process. Technol., Vol. 89, pp. 218-223, 1999   DOI   ScienceOn
3 N. M. Wang and V. C. Shah, "Drawbead Design and Performance", J. Mater. Shaping Technol., Vol. 9, No.1, pp. 21-26, 1991.   DOI   ScienceOn
4 K Mattiason and L. Bernspang, "Drawbead Modelling in Sheet Metal stamping Simulation", Proc. NUMISHEET'99, pp. 235-242, 1999.
5 N. Triantafyllidis, B. Maker, S. K Samanta and G.. Grab, "An Analysis of Drawbeads in Sheet Metal Forming: Part II -Experimental Verification", J. Engr. Mater. Technol. ,vol. 109, pp. 164-170, 1987.   DOI   ScienceOn
6 J. Cao and M C. Boyce, "Drawbead Penetration as a Control Element of Material Flow", SAE 930517, Sheet-Metal and Stamping Symposium, Detroit, 1993.
7 N. Triantafyllidis, B. Maker and S. K. Samanta, "An Analysis of Drawbeads in Sheet Metal Fanning: Part I -Problem Formulation", J. Engr, Mater. Technol. , Val. 108, pp. 321-3Z7, 1986.   DOI   ScienceOn
8 정동원, 이상제, "드로우비드 형상에 따른 박판 성형공정에 미치는 영향에 관한 연구", 대한기계학회논문집 A, Vol. 24, No.6, pp. 1624-1632, 2000.   과학기술학회마을
9 C. Kim, N. Kim, Y. Im arid D. Seo, "Finite Element Analysis and experimental Verification for Drawbead Drawing Processes", Proc. NUMIFORM'95, pp. 741-747, 1995.
10 T. H. Choi, H. Huh, B. K Chun and J. H. Lee, "Draw-bead Simulation by an Elasto-Plastic Finite Element Method with Directional Reduced Integration", J. Mater. Process. Technol., Vol. 63, pp. 666-671, 1997.   DOI   ScienceOn
11 Y. T. Keum, B. Y. Ghoo, J. H. Kim, "Application of an expert Drawbead Model to the Finite Element Simulation of Sheet Forming Processes", J. Mater. Process. Technol., Vol. 111, pp. 155-158, 2001.   DOI   ScienceOn
12 금영탁, 이재우, 박승우, "박판성형공정의 유한요소해석을 위한 드로우비드 전문모델 개발 (2부:모델링)", 한국소성가공학회 춘계학술대회논문집, pp. 50-54, 1997.
13 K. Mattiasson and M. Larsson, "Numerical Procedures for 2D Drawbead Simulation", Proc. NUMIFORM 2001, pp. 679-685, 2001.
14 H. D. Nine, "Drabead Forces in Sheet Metal Forming", in Mechanics and Sheet Forming D. P. Koistinen and N. M. Wang (Eds). Plenum Press, New York, NY pp. 179-211, 1978.