1 |
A. Rabiei and A. G. Evans, "Failure Mechanisms Associated with the Thermally Grown Oxide in Plasma-Sprayed Thermal Barrier Coatings," Acta Mater., 48 [15] 3963-76 (2000).
DOI
|
2 |
J. H. Cho, T. W. Kim, Y. G. Jung, and K. S. Lee, "Thermal and Mechanical Evaluation of the Thermal Barrier Layers Coated by Spray Dried Granules," J. Ceram. Process. Res., 10 [3] 344-50 (2009).
|
3 |
K. S. Lee, D. H. Lee, and T. W. Kim, "Microstructure Controls in Gadolinium Zirconate/YSZ Double Layers and Their Properties," J. Ceram. Soc. Jpn., 122 [1428] 668-73 (2014).
DOI
|
4 |
A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, "Mechanisms Controlling the Durability of Thermal Barrier Coatings," Prog. Mater. Sci., 46 [5] 505-53 (2001).
DOI
|
5 |
M. Watanabe, C. Mercer, C. G. Levi, and A. G. Evans, "A Probe for the High Temperature Deformation of Thermal Barrier Oxides," Acta Mater., 52 [6] 1479-87 (2004).
DOI
|
6 |
A. G. Evans and J. W. Hutchinson, "The Mechanics of Coating Delamination in Thermal Gradients," Surf. Coat. Technol., 201 [18] 7905-16 (2007).
DOI
|
7 |
D. H. Lee, T. W. Kim, and K. S. Lee, "Design of Thermal Barrier Coatings using Gadolinium Zirconate Ceramics: A Study on Gadolinium Zirconate/YSZ Bilayers," J. Ceram. Soc. Jpn., 117 [1365] 550-54 (2009).
DOI
|
8 |
S. W. Myoung, J. H. Kim, W. R. Lee, Y. G. Jung, and K. S. Lee, "Microstructure Design and Mechanical Properties of Thermal Barrier Coatings with Layered Top and Bond Coats," Surf. Coat. Technol., 205 [5] 1229-35 (2010).
DOI
|
9 |
B. R. Lawn, "Indentation of Ceramics with Spheres: A Century after Hertz," J. Am. Ceram. Soc., 81 [8] 1977-94 (1998).
DOI
|
10 |
K. S. Lee, S. K. Lee, B. R. Lawn, and D. K. Kim, "Contact Damage and Strength Degradation in Brittle/Quasi-Plastic Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [9] 2394-404 (1998).
DOI
|
11 |
D. H. Lee and K. S. Lee, "Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test," J. Korean Ceram. Soc., 48 [5] 396-403 (2011).
DOI
|
12 |
G. Bertrand, P. Bertrand, P. Roy, C. Rio, and R. Mevrel, "Low Conductivity Plasma Sparyed Thermal Barrier Coatings using Hollow PSZ Spheres: Correlation between Thermophysical Properties and Microstructure," Surf. Coat. Technol., 202 [10] 1994-2001 (2008).
DOI
|
13 |
W. C. Oliver and G. M. Pharr, "An Improved Technique for Determining Hardness and Elastic Modulus using Load and Displacement Sensing Indentation Experiments," J. Mater. Res., 7 [6] 1564-83 (1992).
DOI
|
14 |
F. Press, "Optimization of the Thermal Barrier System," (NASA, Lewis Research Center, Cleveland, OH, 1985).
|
15 |
D. H. Lee, N. K. Kang, K. S. Lee, H. S. Moon, H. T. Kim, and C. Kim, "Evaluation of Thermal Durability of Thermal Barrier Coating and Change in Mechanical Behavior," J. Korean Ceram. Soc.,54 [4] 314-22(2017).
DOI
|