Browse > Article
http://dx.doi.org/10.4191/kcers.2016.53.3.362

Fabrication of Humidity Control Ceramics from Drinking-Water Treatment Sludge and Onggi Soil  

Lee, Min-Jin (Department of Materials Science and Engineering, Inha University)
Lee, Hyeon-Jun (Department of Materials Science and Engineering, Inha University)
Kim, Kyungsun (Division of Pottery, KSP)
Hwang, Hae-Jin (Department of Materials Science and Engineering, Inha University)
Publication Information
Abstract
In this study, humidity control ceramics with good adsorption/desorption capabilities and high strength were fabricated from drinking-water treatment sludge (DWTS) and Onggi soil. The DWTS powder heat-treated at $800^{\circ}C$ and Onggi soil were mixed at weight ratios of 40:60, 50:50, 60:40, and 70:30 and fired at $800-1000^{\circ}C$. With increasing DWTS content, density and flexural strength increased. For the sample with a DWTS:Onggi soil weight ratio of 70:30, porosity and specific surface area decreased with increasing firing temperature, attributed to densification and grain growth at high firing temperatures. From the results obtained, a firing temperature of $800^{\circ}C$ is the optimum condition for fabricating humidity control ceramics with good adsorption/desorption capabilities and strength. The maximum adsorbed amount for the sample fired at $800^{\circ}C$ was $439g/m^2$.
Keywords
Humidity control ceramics; Adsorption/Desorption capability; Drinking-water treatment sludge (DWTS); Onggi soil; Eco-friendly;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 S. J. Gregg and K. S. W. Sing, Adsorption Surface Area and Porosity; Vol. 3, pp. 111-91, Academic Press, London, 1982.
2 M. Maddison, T. Mauring, K. Kirsimae, and U. Mander, "The Humidity Buffer Capacity of Clay-Sand Plaster Filled with Phytomass from Treatment Wetlands," Build. Environ., 44 1864-68 (2009).   DOI
3 E. J. Jeong, J. K. Lee, D. S. Cheong, Y. S. Chu, and H. Song, "Hygroscopic Characteristic of Gypsum Boards Using Porous Materials," Kor. J. Mater. Res., 19 [10] 538-43 (2009).   DOI
4 I. H. Song, E. J. Lee, H.D. Kim, Y. W. Kim, and D. W. Yun, "Investigation on the Peoperties of a Microcellular Light-Weighted Humidity Controlling Tile," J. Korean Ceram. Soc., 48 [5] 404-11 (2011).   DOI
5 A. E. Turki, R. J. Ball, S. Holmes, W. J. Allen, and G. C. Allen, "Environmental Cycling and Laboratory Testing to Evaluate the Significance of Moisture Control for Lime Mortars," Construct. Build. Mater., 24 1392-97 (2010).   DOI
6 F. Ohashi, M. Maeda, K. Inukai, M. Suzuki, and S. Tomura, "Study on Intelligent Humidity Control Materials: Water Vapor Adsorption Properties of Mesostructured Silica Derived from Amorphous Fumed Silica," J. Mater. Sci., 34 [6] 1341-46 (1999).   DOI
7 K. Goto and S. Terao, "Structures and Humidity Controlling Performances of Zeolite-Cement Hardened Body," J. Ceram. Soc. Jpn., 113 [11] 736-42 (2005).   DOI
8 Y. Tomita, R. Takahashi, S. Sato, T. Sodesawa, and M. Otsuda, "Humidity Control Ability of Silica with Bimodal Pore Structures Prepared from Water Glass," J. Ceram. Soc. Jpn., 112 [9] 491-95 (2004)   DOI
9 D. H. Vu, K. S. Wang, and B. H. Bac, "Humidity Control Porous Ceramics Prepared from Waste and Porous Materials," Mater. Lett., 65 940-43 (2011).   DOI
10 Y. Jia, W. Han, G. Xiong, and W. Yang, "Diatomite as High Performance and Environmental Friendly Catalysts for Phenol Hydroxylation with $H_2O_2$," Sci. Technol. Adv. Mater., 8 [1-2] 106-9 (2007).   DOI
11 J. C. Gonzalez, M. M. Sabio, and F. R. Reinoso, "Sepiolite-Based Adsorbents as Humidity Controller," Appl. Clay. Sci., 20 [3] 111-18 (2001).   DOI
12 A. O. Babatunde and Y. Q. Zhao, "Constructive Approaches toward Water Treatment Works Sludge Management: An International Review of Beneficial Reuses," Crit. Rev. Environ. Sci. Technol., 37 129-64 (2007).   DOI
13 M. Razali, Y. Q. Zhao, and M. Bruen, "Effectiveness of a Drinking-Water Treatment Sludge in Removing Different Phosphorus Species from Aqueous Solution," Sep. Purif. Technol., 55 [3] 300-6 (2007).   DOI
14 G. H. Seo, B. S. Song, D. S. An, S. K. Chung, and D. S. Lee, "Physical Properties of Korean Earthenware(Onggi) as Food Container," Packag. Technol. Sci., 19 [5] 269-78 (2006)   DOI
15 K. Kim, Y. Kim, and S. Kim, "Development of s Sinter-Aids Using a Recycled Glass Powders for Sintering of Clay Brick at a Low-temperature," Journal of Industrial Science and Technology Institute, 26 [1] 59-66 (2012).
16 C. M. F. Vieira, R. Sanchez, S. N. Monteiro, N. Lalla, and N. Quaranta, "Recycling of Electric Arc Furnace Dust into Red Ceramic," J. Mater. Res. Technol., 2 [2] 88-92 (2013)   DOI
17 Lixil company, http://www.lixil.co.jp/lineup/tile/ecocarat/. Accessed on 02/23/2016.