1 |
S. Lee, K. S. Lee, S. K. Woo, J. W. Kim, T. Ishihara, and D. K. Kim, "Oxygen-Permeating Property of (B=Co, Ga) Perovskite Membrane Surface-Modified by ," Solid State Ionics, 158 287-96 (2003).
DOI
|
2 |
X. Tan, Y. Liu, and K. Li, "Mixed Conducting Ceramic Hollow-Fiber Membranes for Air Separation," AlChE Journal, 51 [7] 1991-2000 (2005).
DOI
|
3 |
J. H. Park, E. Lee, T. W. Kim, H. J. Yim, and K. S. Lee, "Fracture Behavior of Glass/Resin/Glass Sandwich Structures with Different Resin Thicknesses," Trans. Korean Soc. Mech. Eng. A, 34 [12] 1849-56 (2010).
DOI
|
4 |
G. H. Cho, E. H. Kim, Y. G. Jung, and Y. K. Byeun, "Improving Oxidation Resistance and Fracture Strength of MgO-C Refractory Material Through Precursor Coating," Surf. Coat. Technol., 260 429-32 (2014).
DOI
|
5 |
K. S. Lee, S. K. Lee, B. R. Lawn, and D. K. Kim, "Contact Damage and Strength Degradation in Brittle/Quasi-Plastic Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [9] 2394-404 (1998).
DOI
|
6 |
J. B. Davis, A. Kristoffersson, E. Carlstrom, and W. J. Clegg, "Fabrication and Crack Deflection in Ceramic Laminates with Porous Interlayers," J. Am. Ceram. Soc., 83 [10] 2369-74 (2000).
DOI
|
7 |
K. S. Lee, K. I. Jung, Y. S. Heo, T. W. Kim, Y. G. Jung, and U. Paik, "Thermal and Mechanical Properties of Sintered Bodies and EB-PVD Layers of Added Ceramics for Thermal Barrier Coatings," J. Alloys Compd., 507 448-55 (2010).
DOI
|
8 |
K. S. Lee, D. H. Lee, and T. W. Kim, "Microstructure Controls in Gadolinium Zirconate/YSZ Double Layers and Their Properties," J. Ceram. Soc. Jpn., 122 [8] 668-73 (2014).
DOI
|
9 |
Y. H. Hsu, I. G. Turner, and A. W. Miles, "Fabrication of Porous Bioceramics with Porosity Gradients Similar to the Bimodal Structure of Cortical and Cancellous Bone," J. Mater. Sci., 18 2251-56 (2007).
|
10 |
J. H. Kang, H. M. Cha, Y. G. Jung, and U. Paik, "Crack Suppression and Residual Stress in Based Ni-MLCCs of Y5V Specification through Post-Process," J. Mater. Process. Technol., 205 160-67 (2008).
DOI
|
11 |
K. S. Lee, S. K. Woo, I. S. Han, D. W. Seo, S. J. Park, and Y. O. Park, "Filtering Characteristics of Porous SiC Filter with High Surface Area," J. Ceram. Soc. Jpn., 110 [7] 656-61 (2002).
DOI
|
12 |
Y. Zhang, F. He, S. Xia, L. Kong, D. Xu, and Z. Wu, "Adsorption of Sediment Phosphorus by Porous Ceramic Filter Media Coated with Nano-Titanium Dioxide Film," Ecol. Eng., 64 ,186-92 (2014).
DOI
|
13 |
K. S. Lee, D. W. Seo, J. H. Yu, and S. K. Woo, "A Study on the Improvement of Strength in NiO-YSZ Porous Anode Material for Solid Oxide Fuel Cell," J. Korean Ceram. Soc., 40 [3] 241-48 (2003).
DOI
|
14 |
G. Pia, L. Casnedi, M. Ionta, and U. Sanna, "On the Elastic Deformation Properties of Porous Ceramic Materials Obtained by Pore-Forming Agent Method," Ceram. Int., 41 11097-105 (2015).
DOI
|
15 |
K. S. Lee, S. K. Kim, C. Kim, T. W. Kim, and D. K. Kim, "Cracking of Densely Coated Layer Adhesively Bonded to Porous Substrates Under Hertzian Stress," J. Mater. Sci., 42 9116-20 (2007).
DOI
|
16 |
K. S. Lee, S. Wuttiphan, X. Z. Hu, S. K. Lee, and B. R. Lawn, "Contact-Induced Transverse Fractures in Brittle Layers on Soft Substrates: A Study on Silicon Nitride Bilayers," J. Am. Ceram. Soc., 81 [3] 571-80 (1998).
DOI
|
17 |
B. N. Nair, R. P. Burwood, V. J. Goh, K. Nakagawa, and T. Yamaguchi, "Lithium Based Ceramic Materials and Membranes for High Temperature Separation," Prog. Mater. Sci., 54 511-41 (2009).
DOI
|
18 |
K. S. Lee, Y. W. Rhee, D. H. Blackburn, and B. R. Lawn, "Cracking of Brittle Coatings Adhesively Bonded to Substrates of Unlike Modulus," J. Mater. Res., 15 [8] 1653-56 (2000).
DOI
|
19 |
K. S. Lee, K. S. Jang, J. H. Park, T. W. Kim, I. S. Han, and S. K. Woo, "Designing the Fiber Volume Ratio in SiC Fiber-Reinforced SiC Ceramic Composites," Mater. Des., 32 4394-401 (2011).
DOI
|
20 |
S. H. Park, S. Lee, J. H. Yu, S. K. Woo, and K. S. Lee, "Fabrication of Membrane and Evaluation on the Mechanical Properties Before and After Separation," J. Korean Ceram. Soc., 44 [1] 58-64 (2007).
DOI
|
21 |
B. R. Lawn, "Indentation of Ceramics with Spheres: A Century after Hertz," J. Am. Ceram. Soc., 81 [8] 1977-94 (1998).
DOI
|
22 |
J. H. Ha, J. H. Kim, and D. K. Kim, "Elasticity and Thermal Conductivity of Porous Ceramics with Controlled Pore Structure," J. Ceram. Soc. Jpn., 112 [5] 1084-88 (2004).
|
23 |
R. W. Rice, "Comparison of Stress Concentration Versus Minimum Solid Area Based Mechanical Property-Porosity Relation," J. Mater. Sci., 28 2187-90 (1993).
DOI
|
24 |
D. H. Lee and K. S. Lee, "Mechanical Behavior of Layered YSZ Thermal Barrier Coatings using Indentation Test," J. Korean Ceram. Soc., 48 [5] 396-403 (2011).
DOI
|
25 |
A. Davison and M. Tinkham, "Phenomenological Equations for the Electrical Conductivity of Microscopically Inhomogeneous Materials," Phys. Rev., 13 [8] 3261-67 (1976).
DOI
|