Variation of Mechanical Properties by Carbon Fiber Volume Percent of Carbon Fiber Reinforced Reaction Bonded SiC |
Yun, Sung-Ho
(Interfacial Engineering Research Center, Korea Institute of Science and Technology)
Yang, Jin-Oh (Interfacial Engineering Research Center, Korea Institute of Science and Technology) Cho, Young-Chul (Interfacial Engineering Research Center, Korea Institute of Science and Technology) Park, Sang-Whan (Interfacial Engineering Research Center, Korea Institute of Science and Technology) |
1 | KS L ISO 18754:2007 "Fine Ceramics(Advanced Ceramics, Advanced Technical Ceramics)-Determination of Density and Apparent Porosity." Korean Industrial Standards, 2007. |
2 | G. R. Antis, P. Chantikul, B. R. Lawn, and D. B. Marshall, "A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements," J. Am. Ceram. Soc., 64 [9] 533-43 (1981). DOI |
3 | R. Pampuch, J. Bialoskoreki, and E. Walask, "Mechanism of Reactions in the Sil + Cf System and the Self-Propagation High Temperature Synthesis of Silicon Carbide," Ceram. Int., 13 [1] 63-8 (1987). DOI |
4 | S. M. Dong, Y. Katoh, A. Kohyama, S. T. Schwab, and L. L. Snead, "Microstructural Evolution and Mechanical Performances of SiC/SiC Composites by Polymer Impregnation/Microwave Pyrolysis (PIMP) Process," Ceram. Int., 28 [8] 899-905 (2002). DOI |
5 | A. Sayno, C. Sutoh, S. Suyama, Y. Itoh, and S. Nakagawa, "Development of a Reaction-Sintered Silicon Carbide Matrix Composite," J. Nucl. Mater., 271-272 467-71 (1999). DOI |
6 | S. P. Lee, Y. Katoh, T. Hinoki, M. Kotani, and A. Kohyama, "Microstructure and Bending Properties of SiC/SiC Composites Fabricated by Reaction Sintering Process," Ceram. Eng. Sci. Proc., 21 [3] 339-46 (2000). |
7 | S. M. Dong, Y. Katoh, and A. Kohyama, "Processing Optimization and Mechanical Evaluation of Hot Press 2D Tyranno-SA/SiC Composites," J. Eur. Ceram. Soc., 23 1223-31 (2003). DOI |
8 | S. M. Dong, Y. Katoh, and A. Kohyama, "Preparation.of SiC/SiC Composites by Hot Press, Using Tyranno-SA Fiber as Reinforcement," J. Am. Ceram. Soc., 86 [1] 26-32 (2003). DOI |
9 | S. Y. Kim, S. K. Woo, and I. S. Han, "Novel Phenol Resin Carbonizing Method for Carbon Interlayer Coating between Reinforcing Fiber and Matrix in Fiber Reinforced Ceramic Composite," J. Kor. Ceram. Soc., 46 [3] 301-5 (2009). 과학기술학회마을 DOI |
10 | S. Lee, M. Imai, and T. Yano, "Fabrication and Mechanical Properties of Oriented SiC Short-Fiber-Reinforced SiC Composites by Tape Casting," Mat. Sci. & Eng. A, A339 90-5 (2003). |
11 | J. N. Ness and T. F. Page, "Microstructural Characterization of Reaction Bonded Silicon Carbide," J. Mater. Sci., 21 1377-97 (1986). DOI |
12 | S. H. Lee, S. W. Lee, K. S. Lee, I. S. Han, D. W. Seo, S. J. Park, Y. O. Park, and S. K. Woo, "Fabrication of Silicon Carbide Candle Filter and Performance Evaluation at High Temperature and Pressure," J. Kor. Ceram. Soc., 39 [5] 503-10 (2002). 과학기술학회마을 DOI |
13 | C. W. Forrest, P. Kenney, and J. V. Shennan, Special Ceramic, Vol.5, pp.99-160, British Ceramic Research Association, Stoke-on-Trent, 1989. |
14 | C, B, Lim and T. Iseki, "Formation and Transportation of Intergranular and Modular Fine-Grained in Reaction- Sintered SiC,' Adv. Ceram. Mater., 3 [6] 590-94 (1988). |
15 | H. C. Park, S. H. Park, and S. C. Choi, "A Study on Fabrication and Properties of Reaction-Bonded Silicon Carbide(2) : Microstructure and Mechanical Properties," J. Kor. Ceram. Soc., 33 [10] 1156-62 (1996). 과학기술학회마을 |
16 | R. Naslain and F. Langlais, "Fundamental and Practical Aspects of the Chemical Vapor Infiltration of Porous Substrates," Carbon, 27 221-35 (1990). |
17 | P. Popper, Special Ceramics, Vol. 1, pp.207-19, British Ceramic Research Association, London, 1960. |
18 | T. M. Besmann, B. W. Sheldon, R. A. Lowden, and D. P. Stinton, "Vapor-Phase Fabrication and Properties of Continuous-Filament Ceramic Composites," Science, 253 [5024] 1104-109 (1991). DOI |
19 | R. Naslain, J. Lamon, R. Pailler, X. Bourrat, A. Guette, and F. Langlais, "Micro/Minicomposites: a Useful Approach to the Design and Development of Nonoxide CMCs," Comp. Part A-Appl Sci., 30 [4] 537-47 (1999). DOI |
20 | K. Sato, A. Tezuka, O. Funayama, T. Issoda, Y. Terada, S. Kato, and M. Iwata, "Fabrication and Pressure Testing of a Gas-Turbine Component Manufactured by a Preceramic-Polymer-Impregnation Method," Comp. Sci. Technol., 59 [6] 853-59 (1999). DOI |