Browse > Article
http://dx.doi.org/10.4191/KCERS.2011.48.1.046

Development of Ceramics Body using Waste Bone China  

Lee, Jea-Il (Department of Ceramic Engineering, Myongji University)
Lee, Yong-Seok (Department of Ceramic Engineering, Myongji University)
Lee, Byung-Ha (Department of Ceramic Engineering, Myongji University)
Publication Information
Journal of the Korean Ceramic Society / v.48, no.1, 2011 , pp. 46-51 More about this Journal
Abstract
The influx of Western culture and the food culture have altered the tableware of Korea, increasing the amount of using tableware. The representative tableware is known as bone china. Considering not only the amount of bone china waste generated from broken tableware at homes and but also faulty bone china products at factories, the bone china waste disposed in simple landfills is to be a serious environmental problem to solve. In this study, following "the research on development of ceramics body using waste celadon" of which the possibility was confirmed, development of ceramics body is conducted by recycling waste bone china. From the result of the study, it was understood that maximum addition of waste bone china was 20% of the whole material on the basis of measurement of plasticity. So 20% of pulverized bone china was added and the characteristics were evaluated, and the result was that porosity, water absorptivity and plasticity were 0.756%, 0.339% and 24.13%, respectively. Bending strength was $672\;kgf/cm^2$, which showed a good sintering condition. Therefore, it was considered that waste bone china could be utilized for development of new porcelain material.
Keywords
Recycling; Waste; Bone china; Ceramics body;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 A. Kara and R. Stevens, "Interactions Between an ABS Type Leadless Glaze and a Biscuit Fired Bone China Body During Glost Firing. Part III : Effect of Glassy Matrix Phase," J. Eur. Ceram. Soc., 23 [10] 1617-28 (2003).   DOI
2 J. I. Lee, Y. S. Lee, and B. H. Lee "Ceramics Body Development Using Waste Whiteware(in Korean)," J. Kor. Ceram. Soc., 43 [10] 626-34 (2006).   과학기술학회마을   DOI
3 J. I. Lee, J. S. Park, Y. S. Lee, and B. H. Lee "Development of Ceramics Body using Waste Celadon(in Korean)," J. Kor. Ceram. Soc., 46 [6] 602-8 (2009).   과학기술학회마을   DOI
4 F. Andreola, L. Barbieri, A. Corradi, I. Lancellotti, and T. Manfredini, "Utilisation of Municipal Incinerator Grate Slag for Manufacturing Porcelainized Stoneware Tiles Manufacturing," J. Eur. Ceram. Soc., 22 [9-10] 1457-62 (2002).   DOI
5 I. Agote, A. Odriozola, N. Gutierrez, A. Santamaria, J. Quintanilla, P. Coupelle, and J. Soares, "Rheological Study of Waste Porcelain Feedstocks for Injection Moulding," J. Eur. Ceram. Soc., 21 [16] 2843-53 (2001).   DOI
6 J. O. Hong, S. G. Kang, K. G. Lee, Y. T. Kim, Y. J. Kim, J. H. Kim, and M. S. Park, "Characteristics of Sintered Bodies Made from the System of Paper Sludge Ash-Fly Ash-Clay(in Korean)," J. Kor. Ceram. Soc., 38 [10] 908-13 (2001).   과학기술학회마을
7 S. W. Lee, H. J. Kim, and E. H. Kim, "Control of Permanent Shrinking of Recycled Castable Refractories from Waste Refractories of $Al_2O_3-SiO_2$(in Korean)," J. Kor. Ceram. Soc., 29 [1] 15-22 (1992).   과학기술학회마을
8 A. Kara and R. Stevens, "Characterisation of Biscuit Fired Bone China Body Microstructure. Part II : Transmission Electron Microscopy(TEM) of Glassy Matrix," J. Eur. Ceram. Soc., 22 [5] 737-43 (2002).   DOI
9 A. Kara and R. Stevens, "Interactions Between an ABS Type Leadless Glaze and a Biscuit Fired Bone China Body During Glost Firing. Part I: Preparation of Experimental Phases," J. Eur. Ceram. Soc., 22 [7] 1095-102 (2002).   DOI
10 A. Kara and R. Stevens, "Interactions Between an ABS Type Leadless Glaze and a Biscuit Fired Bone China Body During Glost Firing. Part II : Investigation of Interactions," J. Eur. Ceram. Soc., 22 [7] 1103-12 (2002).   DOI
11 F. A. C. Oliveira, V. Livramento, and F. Delmas, "Novel Mullite-Based Ceramics Manufactured from Inorganic Wastes. I. Densification Behaviour," J. Mater. Process. Tech., 196 [1-3] 101-8 (2008).   DOI
12 R. R. Menezes, H. G. Malzac Neto, L. N. L. Santana, H. L. Lira, H. S. Ferreira, and G. A. Neves, "Optimization of Wastes Content in Ceramic Tiles using Statistical Design of Mixture Experiments," J. Eur. Ceram. Soc., 28 [16] 3027-39 (2008).   DOI
13 R. R. Menezes, H. S. Ferreira, G. A. Neves, H. L. Lira, and H. C. Ferreira, "Use of Granite Sawing Wastes in the Production of Ceramic Bricks and Tiles," J. Eur. Ceram. Soc., 25 [7] 1149-58 (2005).   DOI