Microstructures and Mechanical Properties of Pressureless and Spark Plasma Sintered ZrO2(3 mol%Y2O3) Bodies |
Shin, Na-Young
(School of Advanced Materials Engineering, Kongju National University)
Han, Jae-Kil (School of Advanced Materials Engineering, Kongju National University) Lee, Hae-Hyoung (Department of Dental Biomaterials, School of Dentistry, Dankook University) Lee, Byong-Taek (School of Advanced Materials Engineering, Kongju National University) |
1 | V. Stanic, N. N. Aldini, and M. Fini, 'Osteointegration of Bioactive Glass-Coated Zirconia in Healthy Bone : An in vivo Evaluation,' Biomater, 23 [18] 3833-41 (2002) DOI ScienceOn |
2 | C. Piconi, W. Burger, and H. Richter, 'Y-TZP Ceramics for Artificial Joint Replacements,' Biometer, 9 1489-94 (1998) |
3 | P. Torricelli, E. Verne, and C. V. Brovarone, 'Biological Glass Coating on Ceramic Materials : In vitro Evaluation Using Primary Osteoblast Cultures from Healthy and Osteopenic Rat Bone,' Biomater, 22 [18] 2535-43 (2001) DOI ScienceOn |
4 | B. T. Lee and K. Hiraga, 'Crack-Propagation and Deformation-Behavior of vol-Percent Composite Studied by Transmission Electron-Microscopy,' J. Mater. Res., 9 [5] 1199-207 (1994) DOI ScienceOn |
5 | B. T. Lee and K. Hiraga, 'Stress-Induced Phase Transformation of in (3 mol%)-25 vol% Composite Studied by Transmission Electron Microscopy,' Scrip. Mater., 38 [7] 1101-07 (1998) DOI ScienceOn |
6 | C. Z. Huang, B. Zhang, and L. He, 'A Study on the Development of a Composite Ceramic Tool /(W,Ti)C and Its Cutting Performance,' J. Mater. Proc. Tech., 129 349-53 (2002) DOI ScienceOn |
7 | A. Marti, 'Inert Bioceramics() for Medical Application,' Int. J. Care Injured, 31 S-D33-36 (2000) |
8 | C. Fernandez, E. Verne, J. Vogel, and G. Carl, 'Optimisation of the Synthesis of Glass-Ceramic Matrix Biocomposites by the Response Surface Methodology,' J. Eur. Ceram. Soc., 23 [7] 1031-38 (2003) DOI ScienceOn |
9 | L. Yin, S. Jahanmir, and L. K. Ives, 'Abrasive Machining of Porcelain and Zirconia with a Dental Handpiece,' Wear, 255 975-89 (2003) DOI ScienceOn |
10 | T. Sornakumar, R. Krishnamurthy, and C. V. Gokularathnam, 'Machining Performance of Phase Transformation Toughened Alumina and Partially Stabilised Zirconia Composite Cutting Tools,' J. Eur. Ceram. Soc., 12 [6] 455-60 (1993) DOI ScienceOn |
11 | B. Smuk, M. Szutkowska, and J. Walter, 'Alumina Ceramics with Partially Stabilized Zirconia for Cutting Tools,' Mater. Proc. Tech., 133 195-98 (2003) DOI ScienceOn |
12 | B. T. Lee, K. Hiraga, D. Shindo, and A. Nishiyama, 'Microstructure of Pressureless-Sintered Vol-Percent Composite Studied by High-Resolution Electron-Microscopy,' J. Mater. Sci., 29 [4] 959-64 (1994) DOI ScienceOn |
13 | B. T. Lee, A. Nishiyama, and K. Hiraga, 'Micro-Indentation Fracture Behavior of vol% , Composite Studied by High-Resolution Electron Microscopy,' Mater. Trans., JIM., 34 682-86 (1993) DOI |
14 | B. T. Lee, T. Koyama, A. Nishiyama, and K. Hiraga, 'Microstructure and Fracture Characteristic of (MgO) Ceramic Composite Studied by Transmission Electron Microscopy,' Scrip. Meta. et Mater., 32 [7] 1073-77 (1995) DOI ScienceOn |
15 | P. F. Becher and M. V. Swain, 'Grain-Size-Dependent Transformation Behavior in Polycrystalline Tetragonal Zirconia,' J. Am. Ceram. Soc., 75 [3] 493-97 (1992) DOI |
16 | K. A. Khor, L. G. Yu, S. H. Chan, and X. J. Chen, 'Densification of Plasma Sprayed YSZ Electrolytes by Spark Plasma Sintering (SPS),' J. Am. Ceram. Soc., 23 1855-63 (2003) DOI ScienceOn |
17 | X. J. Chen, K. A. Chan, S. H. Chan, and L. G. Yu, 'Preparation Yttria-Stabilized Zirconia Electrolyte by Spark-Plasma Sintering,' Mater. Sci. and Eng. A, 341 43-9 (2003) |
18 | M. Nygren and Z. Shen, 'On the Preparation of Bio-, Nano-, and Structural Ceramics and Composites by Spark Plasma Sintering,' Sol. Stat. Sci., 5 [1] 125-31 (2003) DOI ScienceOn |
19 | J. Lu, L. Gao, and J. Sun, 'Effect of Nickel Content on the Sintering Behavior, Mechanical, and Dielectric Properties of Composites from Coated Powders,' Mater. Sci. Eng. A, 293 223-28 (2000) DOI ScienceOn |
20 | R. Janda, J. Roulet, M. Wulf, and H. T:iller, 'A New Adhesive Technology for All-Ceramics,' Dent. Mater., 19 [6] 567-73 (2003) DOI ScienceOn |